Publication Cover
Drying Technology
An International Journal
Volume 13, 1995 - Issue 3
75
Views
11
CrossRef citations to date
0
Altmetric
Original Articles

A Comparison of the Drying Simulation Codes Transpore and Wood2D which are used for the Modelling of Two-Dimensional Wood Drying Processes

&
Pages 695-735 | Published online: 10 May 2007

REFERENCES

  • S. BEN NASRALLAH and P. PERRE [ 1987 ], “Detailed study of a Model of Heat and Mass Transfer during Convective Drying of Porous Media” , Int. J. Heat Mass Transfer , 31 , pp. 957 – 967 .
  • M. ILIC and I. W. TURNER [ 1989 ], “Convective Drying of a Consolidated Slab of Wet Porous Material” , Int. J. Heat Mass Transfer , 32 , 12 , pp. 2351 – 2362 .
  • C. LARTIGUE , J.R PUIGGALI and M. QUINTARD [ 1989 ] “ A Simplified Study of Moisture Transport and Shrinkage in Wood ”, In Drying '89 (Edited by A.S. Mujumdar and M. Roques ), pp. 169 – 175 . Hemisphere , Washington , DC .
  • D. MICHEL , M. QUINTARD and J.R. PUIGGALI [ 1987 ], “ Experimental and Numerical Study of Pine Wood Drying at Low Temperature ”, In Drying '87 (Edited by A. S. Mujumdar ), pp. 185 – 193 . Hemisphere , Washington , DC .
  • C. MOYNE and C. BASILICO [ 1985 ], “ High Temperature Drying of Softwood and Hardwood : Drying Kinetics and Product Quality Interactions ”, In Drying '85 , ( Edited by R. Toei and A. S. Mujumdar ), pp. 376 – 381 . Hemisphere , New York , NY .
  • C. MOYNE and P. PERRÉ [ 1991 ], “Processes Related to Drying . J. Theoretical Model”, Drying Technology , 9 , 5 , pp. 1135 – 1152 .
  • S. V. PATANKAR [ 1980 ], Numerical Heat Transfer and Fluid Flow , Hemisphere Publishing Corporation , McGraw Hill .
  • P. PERRÉ , S. B. NASRALLAH and G. ARNAUD [ 1986 ], “ A Theoretical Study of Drying : Numerical Simulations Applied to Clay-Brick and Softwood” , In Drying '86 Vol. 1 , (Edited by A. S. Mujumdar ), pp. 382 – 390 . Hemisphere , Washington , DC .
  • P. PERRÉ [ 1987a ], “Measurements of Softwoods' Permeability to Air : Importance upon the Drying Model” , Int. Comm. Heat Mass Transfer , 14 , pp. 519 – 529 .
  • P. PERRÉ [ 1987b ], “Le Sechange convectif de bois resineux : choix, validation el utilisation d'un modele” , These de Doctorat , Paris Vii .
  • P. PERRE , J.P. FOHR and G. ARNAUD [ 1989 ] “ A Model of Drying Applied to Softwoods: The Effect of Gaseous Pressure Below the Boiling Point ”, In Drying '89 (Edited by A.S. Mujumdar and M. Roques (, pp. 91 – 98 . Hemisphere , Washington , DC .
  • P. PERRÉ and D. MAILLET [ 1989 ], “Drying of Softwoods: The Interest of a Two-Dimensional Model to Simulate Anisotropy or to Predict Degrade” , IUFRO Wood Drying Symposium, Weyerhaeuser Co ., Seattle , Washington , USA .
  • P. PERRÉ and A. DEGIOVANNI [ 1990 ], “Simulation par volumes finis des Transferts Couples en Milieu Poreux Anisotropes : sechange du bois a basse et a haute temperature” . Int. J. Heat Mass Transfer , 33 , 11 , pp. 2463 – ;2478 .
  • P. PERRÉ and C. MOYNE [ 1991 ], “Processes Related to Drying. II. Use of the same Model to Solve Transfers Both in Saturated and Unsaturated Porous Media” , Drying Technology , 9 , 5 , pp. 1153 – 1180
  • P. PERRÉ , M. MOSER and M. MARTIN [ 1993 ], “Advances in Transport Phenomena during Convective Drying with Superheated Steam and Moist Air” , Int. J. Heat Mass Transfer , 36 , 11 , pp. 2725 – 2746 .
  • M. PRAT [ 1991 ], “2D Modelling of Drying of Porous Media: Influence of Edge Effects at the Interface” , 9 . 5 , pp. 1181 – 1208 .
  • J. R. PUIGGALI and M. QUINTARD [ 1990 ], “Determination de Proprietes de Transfert dans les Strates d'un Bois Resineux” , C. R. Acad. Sci. Paris , 310 ., Series 11 , pp. 1719 – 1724 .
  • M. QUINTARD and S. WHITAKER [ 1993 ], “One and Two Equation Models for Transient Diffusion Processes in Two Phase Systems” , Advances in Heat Transfer , 23 , pp. 369 – 464 .
  • J. F. SIAU [ 1984 ], Transport Processes in Wood , Springer-Verlag , New York , NY .
  • M. A. STANISH , G. S. SCHAJER and F. KAYIHAN [ 1985 ], “ Mathematical Modelling of Wood Drying from Heat and Mass Transfer Fundamentals” , In Drying '85 , (Edited by R. Toei and A. S. Mujumdar ), pp. 360 – 367 . Hemisphere , Washington , DC .
  • M. A. STANISH , G. S. SCHAJER and F. KAYIHAN [ 1986 ], “A Mathematical Model of Drying for Hygroscopic Porous Media” , AIChE Journal , 32 , 8 , pp. 1301 – 1311 .
  • I. W. TURNER and M , ILIC [ 1990a ], “Convective Drying of a Consolidated Slab of Wet Porous Material Including the Sorption Region” , Int. Comm. Heat Mass Transfer , 17 , 1 , pp. 39 – 48 .
  • I. W. TURNER and P. G. JOLLY [ 1990b ], “The Modelling of Combined Microwave and Convective Drying of a Wet Porous Material” , Drying Technology , 9 , 5 , pp. 1209 – 1270 .
  • I. W. TURNER [ 1990 ], “The Modelling of Combined Microwave and Convective Drying of a Wet Porous Material” , PhD Thesis, Dept. Mech. Engn . University of Queensland .
  • I. W. TURNER [ 1993 ], “A Two-Dimensional Orthotropic Model for Simulating Wood Drying Processes” , Submitted to Journal of Appl. Math. Modelling .
  • I. W. TURNER and W. J. FERGUSON [ 1994 ], “An unstructured mesh cell-centred control volume method for simulating heat and mass transfer in porous media: Application to softwood drying. Part I: The isotropic model” . Submitted to Applied Mathematical Modelling , March 1994 .
  • I. W. TURNER and W. J. FERGUSON [ 1994 ], “An unstructured mesh cell-centred control volume method for simulating heat and mass transfer in porous media: Application to softwood drying. Part II: The Anisotropic model] , Submitted to Applied Mathematical Modelling , March 1994 .
  • S. WHITAKER [ 1977 ], “Simultaneous Heat, Mass and Momentum Transfer in Porous Media: A Theory of Drying” , Advances in Heat Transfer , 13 , pp. 119 – 203 , Academic , New York , NY .
  • S. WHITAKER [ 1991 ], “Improved Constraints for the principle of Local Thermal Equilibrium” , Ind. Eng. Chemical Research , 30 , 5 , pp. 983 – 997 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.