References
- Brooker , D.B. , Bakker–Arkema , F.W. and Hall , C. W. , 1974 , Drying Cereal Grains , AVI Publ. Co. Inc. , Westport , CO .
- Cenkowski , S. , Jayas , D.S. and Pabis , S. , 1993 , Deep-bed grain drying - A review of particular theories , Drying Technol. , 1 l( 7 ) pp. 1553 – 1581 .
- Douglas , P.L. , Jones , J.A.T. and Mallick , S.K. , 1994 , Modelling and simulation of crossflow grain dryers. Part 1: model development , Trans. IChemE , Part A , 72 pp. 325 – 331 .
- Dullien , F.A.L. , 1975 , Single phase flow through porous media and pore structure , The Chemical Engineering Journal , 10 pp. 1 – 34 .
- FIDAP , 1993 , Users Manual , Revision 7.0 , Fluid Dynamics International Inc.
- Franca , A.S. , Fortes , M. and Haghighi , K. , 1994 , Numerical simulation of intermittent and continuous deep-bed drying of biological materials , Drying Technol. , 12 ( 7 ) pp. 1537 – 1560 .
- Haghigjhi , K. and Segerlind , L.J. , 1988 , Modeling simultaneous heat and mass transfer in an isotropic sphere - A finite element approach , Trans. ASAE , 3 l( 2 ) pp. 629 – 637 .
- Haghighi , K. , Imdayaraj , J. , Stroshine , R.L. and Sokhansanj , S. , 1990 , Grain kernel drying simulation using the finite element method , Trans. ASAE , 33 ( 6 ) pp. 1957 – 1965 .
- Ingram , G.W. , 1976, Deep-bed drier simulation with intraparticle moisture diffusion, J. Agric. Engng. Res. , 21(3) pp. 263–272.
- Imdayaraj , J. , Haghighi , K. and Stroshine , R.L. , 1992 , Finite element analysis of drying with application to cereal grains , J. Agric. Engng. Res. , 53 pp. 209 – 229 .
- Jayas , D. S. , Cenkowski , S. , Pabis , S. and Muir , W.E. , 1991 , Review of thin-layer drying and wetting equations , Drying Technol. , 9 ( 3 ) pp. 551 – 588 .
- Kwok , W. , Haghighi , K. and Kang , E. , 1995 , An eficient data structure for advancing front triangular mesh generation technique , Com. Num. Meth. Eng. , 11 pp. 465 – 473 .
- Martins , J.H. , Filho , J.B.P. , Fortes , M. and Sediyama , G.C. , 1982 , Simulations de secagem de milho em camada estaciomiria , Revista Brasileira de Armazenamento , 7 ( 1 ) pp. 5 – 18 .
- Masmoudi , W. and Prat , M. , 1991 , Heat and mass transfer between a porous medium and a parallel external flow. Application to drying of capillary porous materials , Int. J. Heat Mass Transfer , 34 ( 8 ) pp. 1975 – 1989 .
- Misra , R.N. and Young , J.H. , 1978 , Finite element analysis of simultaneous moisture difiion and shrinkage of soybeans during drying , ASAE Paper No. 78-3056 , ASAE , St Joseph , MI .
- Pany , J.L. , 1985 , Mathematical modelling and computer simulation of heat and mass transfer in agricultural grain drying: a review , J. Agric. Engng. Res. , 32 pp. 1 – 29 .
- Parti , M. , 1993 , Selection of mathematical models for drying grain in thinlayers , J. Agric. Engng. Res. , 54 pp. 339 – 352 .
- Prat , M. , 1990 , Modelling of heat transfer by conduction in a transition region between a porous medium and an external fluid , Transport in Porous Media , 5 , pp. 71 – 95 .
- Sarker , N.N. , Kunze , O.R. and Strouboulis , T. , 1994 , Finite element simulation of rough rice drying , Drying Technol. , 12 ( 4 ) pp. 761 – 775 .
- Sharp , J.R. , 1982 , A review of low temperature drying simulation models , J. Agric. Engng. Res. , 27 pp. 169 – 190 .
- Sokhansanj , S. and Gustafson , R.J. , 1980 , Prediction of heat and mass transfer within a grain kernel - a finite element application , Proc. 2nd Int. Drying Symp. , pp. 229 – 232 , ed. A.S. Mujumdar
- Spencer , H.B. , 1969, A mathematical simulation of grain drying, J. Agric. Engng. Res. , 14(3) pp. 226–235.
- Tal , R. , Lee , D.N. and Sirignano , W.A. , 1983 , Hydrodynamics and heat transfer in sphere assemblages - cylindrical cell models , Int. J. Heat Mass Transfer , 26 pp. 1265 – 1273 .
- Thomas , H.R. , Morgan , K. and Lewis , R.W. , 1980 , A fully nonlinear analysis of heat and mass transfer problems in porous bodies , Int. J. Num. Methods Eng. , 15 pp. 1381 – 1393 .
- Waananen , K.M. , Litchfield , J.B. and Okos , M.R. , 1993 , Classification of drying models for porous solids , Drying Technol. , 11 (l) pp. 1 – 40 .