References
- Akella , R. and Kumar , P. R. ( 1986 ) Optimal control of production rate in a failure prone manufacturing system . IEEE Transactions on Automatic Control , AC-31 ( 2 ), 116 – 126 .
- Altiok , T. ( 1996 ) Performance Analysis of Manufacturing Systems , Springer , New York , NY .
- Bielecki , T. and Kumar , P. R. ( 1988 ) Optimality of zero-inventory policies for unreliable manufacturing systems . Operations Research , 36 ( 4 ), 532 – 541 .
- Bonvik , A. M. ( 1994 ) private communication .
- Bonvik , A. M. ( 1996 ) Performance analysis of manufacturing systems under hybrid control policies . Ph.D. thesis , Operations Research Center, Massachusetts Institute of Technology , Cambridge , MA .
- Bonvik , A. M. , Couch , C. E. and Gershwin , S. B. ( 1997 ) A comparison of production-line control mechanisms . International Journal of Production Research , 35 ( 3 ), 789 – 804 .
- Burman , M. H. ( 1995 ) New results in flow line analysis . Ph.D. thesis , Operations Research Center, Massachusetts Institute of Technology , Cambridge , MA .
- Buzacott , J. A. and Shanthikumar , J. G. ( 1992 ) Design of manufacturing systems using queuing models . Queueing Systems Theory and Applications , 12 ( 1/2 ), 135 – 213 .
- Buzacott , J. A. and Shanthikumar , J. G. ( 1993 ) Stochastic Models of Manufacturing Systems , Prentice Hall , Englewood Cliffs , NJ .
- Dai , J. G. ( 1995a ) On positive Harris recurrence of multiclass queueing networks a unified approach via fluid limit models . Annals of Applied Probability , 5 , 49 – 77 .
- Dai , J. G. ( 1995b ) Stability of open multiclass queueing networks via fluid models , in Proceedings of the IMA Workshop on Stochastic Networks , Kelly, F. and Williams, R. (eds) , Springer-Verlag , New York , pp. 71 – 90 .
- Dai , J. G. ( 1996 ) A fluid-limit model criterion for instability of multiclass queueing networks . Annals of Applied Probability , 6 , 751 – 757 .
- Dai , J. G. and Meyn , S. ( 1995 ) Stability and convergence of moments for multiclass queueing networks via fluid limit models . IEEE Transactions on Automatic Control , AC-40 , 1889 – 1904 .
- Dai , J. G. and Weiss , G. ( 1996 ) Stability and instability of fluid models for re-entrant lines . Mathematics of Operations Research , 21 , 115 – 134 .
- Dallery , Y. ( 1999 ) Extending the scope of analytical methods for performance evaluation of manufacturing flow systems , in Proceedings of the Second Aegean International Conference on Analysis and Modeling of Manufacturing Systems , ( http//www.samos.aege-an.gr/icsd/secaic/ ).
- Dallery , Y. , David , R. and Xie , X. -L. ( 1988 ) An efficient algorithm for analysis of transfer lines with unreliable machines and finite buffers . IIE Transactions , 20 ( 3 ), 280 – 283 .
- Dallery , Y. and Gershwin , S. B. ( 1992 ) Manufacturing flow line systems a review of models and analytical results . Queueing Systems Theory and Applications , 12 , 3 – 94 .
- Dallery , Y. and Liberopoulos , G. ( 1997 ) Extended kanban control system a new kanban-type pull control mechanism for multistage manufacturing systems . Working paper , Laboratoire MASI, Universite Pierre et Marie Curie , Paris .
- Dallery , Y. and Liberopoulos , G. ( 2000 ) Extended kanban control system combining kanban and base stock . IIE Transactions on Design and Manufacturing , 32 , ( in press ).
- Deshpande , S. ( 1999 ) A scheduling policy experiment for lean implementation . MS thesis, MIT Technology and Policy Program , MIT , Cambridge , MA .
- Di Mascolo , M. , David , R. and Dallery , Y. ( 1991 ) Modeling and analysis of assembly systems with unreliable machines and finite buffers . IIE Transactions , 23 ( 4 ), 315 – 331 .
- Down , D. and Meyn , S. ( 1997 ) Piecewise linear test functions for stability and instability of queueing networks . Queueing Systems Theory and Applications , 27 , 205 – 226 .
- Frein , Y. , Commault , C. and Dallery , Y. ( 1996 ) Modeling and analysis of closed-loop production lines with unreliable machines and finite buffers . IIE Transactions , 28 , 545 – 554 .
- Frein , Y. , Di Mascolo , M. and Dallery , Y. ( 1994 ) On the design of generalized kanban control systems . International Journal of Operations and Production Management , 15 ( 9 ), 158 – 184 .
- Gershwin , S. B. ( 1987 ) An efficient decomposition method for the approximate evaluation of tandem queues with finite storage space and blocking . Operations Research , 35 , 291 – 305 .
- Gershwin , S. B. ( 1991 ) Assembly/disassembly systems an efficient decomposition algorithm for tree-structured networks . IIE Transactions , 23 ( 4 ), 302 – 314 .
- Gershwin , S. B. ( 1994 ) Manufacturing Systems Engineering , Prentice-Hall , Englewood Cliffs , NJ , ( see http//web.mit.edu/manuf-sys/ www/gershwin.errata.html for corrections ).
- Gershwin , S. B. ( 1997 ) Design and operation of manufacturing systems - control- and system-theoretical models and issues , in Proceedings of the 1997 American Control Conference , pp. 1909 – 1913 .
- Gershwin , S. B. and Schor , J. E. ( 1997 ) Efficient algorithms for buffer space allocation . Annals of Operations Research , ( in press ).
- Helber , S. ( 1997 ) Approximate analysis of unreliable transfer lines with splits in the flow of material . Annals of Operations Research , ( in press ).
- Helber , S. ( 1999 ) Performance Analysis of Flow Lines with Non-Linear Flow of Material , Springer , Berlin .
- Karaesmen , F. , Buzacott , J. A. and Dallery , Y. ( 1999 ) Integrating advance information in pull type control mechanisms for multi-stage production , in Proceedings of the Second Aegean International Conference on Analysis and Modeling of Manufacturing Systems , ( http//www.samos.aegean.gr/icsd/secaic/ ).
- Kimemia , J. G. and Gershwin , S. B. ( 1983 ) An algorithm for the computer control of production in a flexible manufacturing system . IIE Transactions , 15 ( 4 ), 353 – 362 .
- Kumar , P. R. and Meyn , S. ( 1995 ) Stability of queueing networks and scheduling policies . IEEE Transactions on Automatic Control , 40 ( 2 ), 251 – 260 .
- Kumar , P. R. and Seidman , T. I. ( 1990 ) Dynamic instabilities and stabilization methods in distributed real-time scheduling of manufacturing systems . IEEE Transactions on Automatic Control , 35 ( 3 ), 289 – 298 .
- Liberopoulos , G. and Dallery , Y. ( 1997 ) A unified framework for pull control mechanisms in multi stage manufacturing systems . Working Paper , Laboratoire MASI, Universite Pierre et Marie Curie , Paris .
- Lou , S. X. C. and Kager , P. ( 1989 ) A robust production control policy for VLSI wafer fabrication . IEEE Transaction on Semiconductor Manufacturing , 2 , 159 – 164 .
- Lou , S. X. C. , Sethi , S. P. and Zhang , Q. ( 1994 ) Optimal feedback production planning in a stochastic two-machine flowshop . European Journal of Operational Research , 73 , 331 – 345 .
- Lou , S. X. C. , van Ryzin , G. ( 1989 ) Optimal control rules for scheduling job shops . Annals of Operations Research , 17 , 233 – 248 .
- Lu , S. H. and Kumar , P. R. ( 1991 ) Distributed scheduling based on due dates and buffer prioritization . IEEE Transactions on Automatic Control , 36 , 1406 – 1416 .
- Meyn , S. ( 1995 ) Transience of multiclass queueing networks via fluid limits . Annals of Applied Probability , 5 , 946 – 957 .
- Meyn , S. ( 1996 ) Stability and optimization of queueing networks and their fluid models , in Proceedings of the Summer Seminar on The Mathematics of Stochastic Manufacturing Systems , American Mathematical Society , Williamsburg , VA , June 1996 .
- Nemec , J. E. ( 1999 ) Diffusion and decomposition approximations of stochastic models of multiclass processing networks . Ph.D. thesis , Operations Research Center, Massachusetts Institute of Technology , Cambridge , MA .
- Orlicky , J. ( 1975 ) Material Requirements Planning , McGraw-Hill .
- Perkins , J. R. and Kumar , P. R. ( 1995 ) Optimal control of pull manufacturing systems . IEEE Transactions on Automatic Control , 40 ( 12 ), 2040 – 2051 .
- Perkins , J. and Kumar , P. R. ( 1989 ) “ Stable Distributed Real-Time Scheduling of Flexible Manufacturing/Assembly/Disassembly Systems ,” IEEE Transactions on Automatic Control , 34 ( 2 ), 139 – 148 .
- Rishel , R. ( 1975 ) Dynamic programming and minimum principles for systems with jump Markov disturbances . SIAM Journal on Control , 13 ( 2 ).
- Schor , J. E. ( 1995 ) Efficient algorithms for buffer allocation . MS thesis , MIT EECS , Cambridge , MA .
- Schor , J. E. and Gershwin , S. B. ( 1996 ) Efficient algorithms for buffer allocation , in 1996 Manufacturing and Service Operations Management Conference Proceedings .
- Spearman , M. L. , Woodruff , D. L. and Hopp , W. J. ( 1990 ), “ CONWIP a pull alternative to kanban ,” International Journal of Production Research , 28 ( 5 ), 879 – 894 .
- Srivatsan , N. ( 1993 ) Synthesis of optimal policies for stochastic manufacturing systems . Ph.D. thesis , Operations Research Center, Massachusetts Institute of Technology , Cambridge , MA .
- Srivatsan , N. and Dallery , Y. ( 1998 ) Partial characterization of optimal hedging point policies in unreliable two-part-type manufacturing systems . Operations Research , 46 , 36 – 45 .
- Syrowicz , D. ( 1999 ) Decomposition analysis of a deterministic, multiple-part-type, multiple-failure-mode production line . Master's thesis , MIT EECS , Cambridge , MA .
- Tolio , T. and Gershwin , S. B. ( 1998 ) Throughput estimation in cyclic queueing networks with blocking . Annals of Operations Research , 79 , 207 – 229 .
- van Ryzin , G. J. ( 1987 ) Control of manufacturing systems with delay . Master's thesis , MIT EECS , Cambridge , MA .
- van Ryzin , G. J. , Lou , X. -C. and Gershwin , S. B. ( 1993 ) Production control for a tandem two-machine system . IIE Transactions , 25 ( 5 ), 5 – 20 .
- Wein , L. ( 1988 ) Scheduling semiconductor wafer fabrication . IEEE Transactions on Semiconductor Manufacturing , 1 ( 3 ), 115 – 130 .
- Yan , H. , Lou , S. X. C. , Sethi , S. P. , Gardel , A. and Deosthali , P. ( 1996 ) Testing the robustness of two-boundary control policies in semiconductor manufacturing . IEEE Transactions on Semiconductor Manufacturing , 9 ( 2 ), 285 – 288 .