References
- Ballou , D.P. and Pazer , H.L. ( 1982 ) Theimpact of inspection fallibility on theinspection policy in serial production systems. Management Science , 28 , 387 – 399 .
- Barad , M. and Braha , D. ( 1996 ) Control limits for multi-stage manufacturing processes with binomial yield (single and multiple production runs). Journal of the Operational Research Society , 47 ( 1 ), 98 – 112 .
- Barker , T.B. ( 1986 ) Quality engineering by design: Taguchi's philosophy. Quality Progress , 32 – 42 .
- Bazaraa , M.S. and Shetty , C.M. ( 1979 ) Nonlinear Programming Theory and Algorithms , John Wiley, New York , NY .
- Beightler , C.C. and Mitten , L.G. ( 1964 ) Design of an optimal sequence of interrelated sampling plans. Journal of the American Statistical Association , 59 , 96 – 104 .
- Britney , R. (1972) Optimal screening plans for nonserial production systems. Management Science , 18, 550–559.
- Brown , E.C. ( 1968 ) Some mathematical models of inspection along a production line. , Technical report no. 36, Operations Research Center, MIT, Cambridge , MA .
- Buzacou , J.A. and Shanthikumar , J.G. ( 1993 ) Stochastic Models of Manufacturing Systems , Prentice Hall, New York , NY .
- Collman , E.G. Jr., Lucker , G.S. and Rinnooy Kan , A.H.G. ( 1988 ) Asymptotic methods in the probabilistic analysis of sequencing and packing heuristics. Management Science , 34 , 266 – 290 .
- Delimun . N.C. and Feldman , R.M. ( 1996 ) Optimization of process improvement and inspection location for serial manufacturing. International Journal of Production Research , 34 , 395 – 405 .
- Dietrich , D.L. ( 1971 ) A Bayesian quality assurance model for a multistage production process , in ASQC Technical Conference Transactions , pp. 338 – 348 .
- Do , S.B. and Hyung , J.Y. ( 1996 ) Optimal allocation of inspection effort in a serial multi-stage production system. Computers and Industrial Engineering , 30 ( 3 ), 387 – 396 .
- Dorris , A.L. and Foote , B.L. ( 1978 ) Inspectors errors and statistical quality control: a survey. American Institute of Industrial Engineers Transactions , 10 , 148 .
- Eppen , G. and Hurst , E. ( 1974 ) ptimal location of inspection stations in multistage production process. Management Science , 20 , 1194 – 1200 .
- Ercan , S.S. ( 1972 ) Systems approach to the multistage manufacturing connected unit situation. Naval Research Logistics Quarterly , 19 . 493 – 500 .
- Garey , M. R. ( 1971 ) Optimal test point selection for sequential manufucturing processes , Bell System Technical Journal , 51 , 291 – 300 .
- Hurst , E.G. Jr, ( 1973 ) Imperfect inspection in multistage production processes. Management Science , 20 , 378 – 384 .
- Lee , H.L. and Rosenblatt , M.J. ( 1987 ) Simultaneous determination of production cycle and inspection schedules in a production system. Management Science , 33 ( 9 ), 1125 – 1136 .
- Lee , H.L. and Rosenblatt , M.J. ( 1989 ) A production and maintenance planning model with restoration cost dependent on detection delay. IIE Transactions , 21 ( 4 ), 368 – 375 .
- Lee , H.L. and Yuno , C.A. ( 1988 ) Production control for multi-stage systems with variable yield losses. Operations Research , 36 , 269278 .
- Lee , J.S. and Park , K.S. ( 1991 ) Joint determination of production cycle and inspection intervals in a deteriorating production system. Journal of the Operational Research Society , 42 ( 9 ), 775 – 783 .
- Lin , T.M. , Tseng , S.T. and Liou , M.J. ( 1991 ) Optimal inspection schedule in the imperfect production system under general shift distribution. Journal of the Chinese Institute of Industrial Engineers , 8 ( 2 ), 73 – 81 .
- Lindsay , G.F. and Bishop , A.B. ( 1964 ) Allocation of screening inspcction effort - a dynamic programming approach. Management Science , 10 , 342 – 352 .
- Makis , V. ( 1998 ) Optimal lot sizing and inspection policy for an EMQ model with imperfect inspection. Naval Research Logistics , 45 , 165 – 186 .
- Mcnipaz , E. ( 1978 ) A taxonomy of economically based quality control procedures. International Journal of Production Research , 16 ( 2 ), 153 – 167 .
- Peters , M.H. and Williams , W.W. ( 1984 ) Location of quality inspection stations: an experimental assessment of five normative rules. Decision Sciences , 15 , 389 – 408 .
- Pruzan , P.M. and Jackson , J.T.R. ( 1967 ) A dynamic programming application in production line inspection. Technometrics , 9 , 73 – 81 .
- Rabinowitz , G. and Emmons , H. ( 1997 ) Optimal and heuristic inspection sehedulcs for multistage production systems. IIE Transactions , 29 ( 12 ), 1063 – 1071 .
- Rabinowitz , G. and Yahalom , O. ( 2001 ) Imperfect inspection of a multi-attribute deteriorating production system - a continuous time model. Quality and Reliability Engineering International , 17 , 1 – 12 .
- Rahim , M.A. ( 1994 ) Joint determination of production quality, inspection schedule and control chart design. IIE Transactions , 26 ( 6 ), 2 – 11 .
- Rahim , M.A. and Banerjee , P.K. ( 1993 ) A generalized model for the economic design of x control chart for production systems with increasing failure rate and early replacement. Naval Research Logistics , 40 , 787 – 809 .
- Raz , T. ( 1986 ) A survey of models for allocating of inspection effort in multistage production systems. Journal af Quality Technology , 18 ( 4 ), 239 – 247 .
- Raz , T. and Kaspi , M. ( 1991 ) Location and sequencing of imperfect inspection operations in serial multi-stage production systems. International Journal of Production Research , 29 ( 8 ), 1645 – 1659 .
- Rosenblatt , M.J. and Lee , H.L. ( 1986 a) A comparative study of continuous and periodic inspection policies in deteriorating production systems. IIE Transactions , 18 , 2 – 9 .
- Rosenblatt , M.J. and Lee , H.L. ( 1986 b) Economic production cycles with imperfect production process. IIE Transactions , 18 , 48 – 55 .
- Ruey , Y.Y. ( 1997 ) Optimal inspection and replacement policies for multi-state deteriorating systems. European Journal ofOperational Research , 96 ( 2 ), 248 – 259 .
- Seog , J.C. , Park , Y.H. and Park , E.H. ( 1996 ) Quality costs in multistage manufacturing systems. Computers and Industrial Engineering , 31 ( 1-2 ), 115 – 118 .
- Trippi , R.R. ( 1975 ) The warehouse location formulation as a special type of inspection problem. Management Science , 986 – 988 .
- Tseng , S.T. ( 1996 ) Optimal preventive maintenance policy for deteriorating production systems. IIE Transactions , 28 , 687 – 694 .
- Wein , A.S. ( 1992 ) Random yield rework and scrap in a multi-stage batch manufacturing environment. Operations Research , 40 , 551 – 563 .
- White , L.S. ( 1966 ) The analysis of a single class of multistage inspection plans. Management Science , 21 , 685 – 693 .
- White , L.S. ( 1969 ) Shortest route models for the allocation of inspection efforts on a production line. Management Science , 15 , 249 – 259 .
- Woo , W.K. and Metcalfe , T.E. ( 1972 ) Optimal allocation of inspection effort in multistage manufacturing processes. Western Electric Engineer , 16 , 8 – 16 .
- Yum , B.J. and McDowell , E.D. ( 1981 ) The optimal allocation of inspection effort in a class of nonserial production systems. IIE Transactions , 13 , 285 – 293 .
- Yum , B.J. and McDowell , E.D. ( 1987 ) Optimal inspection policies in a serial production system Including scrap rework and repair: an MILP approach. International Journal of Production Research , 25 ( 10 ), 1451 – 1464 .
- Corresponding author