References
- Agnihothri , S. R. and Kenett , R. S. 1995 . The impact of defects on a process with rework . European Journal of Operational Research , 80 : 308 – 327 .
- Bulgak , A. A. 1992 . Impact of quality improvement on optimal buffer design and productivity in automatic assembly systems . Journal of Manufacturing Systems , 11 : 124 – 136 .
- Cheng , C. H. , Miltenburg , J. and Motwani , J. 2000 . The effect of straight- and U-shaped lines on quality . IEEE Transactions on Engineering Management , 47 : 321 – 334 .
- Chern , C. C. and Yang , P. 1999 . Determining a threshold control policy for an imperfect production system with rework jobs . Naval Research Logistics , 46 : 273 – 301 .
- Deliman , N. C. and Feldman , R. M. 1996 . Optimization of process improvement and inspection location for serial manufacturing . International Journal of Production Research , 34 : 395 – 405 .
- Finkelshtein , A. , Herer , Y. T. , Raz , T. and Ben-Gal , I. 2005 . Economic optimization of off-line inspection in a process subject to failure and recovery . IIE Transactions , 37 : 995 – 1009 .
- Han , M.-S. , Lim , J.-T. and Park , D.-J. 1998 . Performance analysis of serial production lines with quality inspection machines . International Journal of System Science , 29 : 939 – 951 .
- Humphrey , A. S. , Taylor , G. D. and Landers , T. L. 1998 . Stock level determination and sensitivity analysis in repair/rework operations . International Journal of Operations & Production Management , 18 : 612 – 630 .
- Inman , R. R. , Blumenfeld , D. E. , Huang , N. and Li , J. 2003 . Designing production system for quality: Research opportunities from automotive industry perspective . International Journal of Production Research , 41 : 1953 – 1971 .
- Jacobs , D. A. and Meerkov , S. M. 1991 . Asympototically reliable serial production lines with quality control systems . Computers Mathematics and Applications , 21 : 85 – 90 .
- Khouja , M. , Rabinowitz , G. and Mehrez , A. 1995 . Optimal robot operation and selection using quality and output trade-off . International Journal of Advanced Manufacturing Technology , 10 : 342 – 355 .
- Kim , J. and Gershwin , S. B. 2005 . Integrated quality and quantity model of a production line . OR Spectrum , 27 : 287 – 314 .
- Li , J. 2004a . Performance analysis of production systems with rework loops . IIE Transactions , 36 : 755 – 765 .
- Li , J. 2004b . Throughput analysis in automotive paint shops: a case study . IEEE Transactions on Automation Science and Engineering , 1 : 90 – 98 .
- Li , J. 2005 . Overlapping decomposition: a system-theoretic method for modeling and analysis of complex manufacturing systems . IEEE Transactions on Automation Science and Engineering , 2 : 40 – 53 .
- Li , J. , Blumenfeld , D. E. and Marin , S. P. 2005 . Quality robustness design of manufacturing systems , Warren , MI : General Motors Research & Development Center . Technical Report R&D-10170
- Li , J. , Blumenfeld , D. E. and Marin , S. P. 2007 . Manufacturing system design to improve quality buy rate . IEEE Transactions on Automation Science and Engineering , 4 : 75 – 79 .
- Li , J. and Huang , N. 2007 . Quality evaluation in flexible manufacturing systems: A Markovian approach . Mathematical Problems in Engineering , Article 57128
- Lim , J.-T. and Meerkov , S. M. 1993 . On asymptotic reliable closed serial production lines . Control Engineering Practices , 1 : 147 – 152 .
- Lim , J.-T. , Meerkov , S. M. and Top , F. 1990 . Homogeneous, asymptotic reliable serial production lines: theory and a case study . IEEE Transactions on Automatic Control , 35 : 524 – 534 .
- Liu , J. J. and Yang , P. 1996 . Optimal lot-sizing in an imperfect production system with homogeneous reworkable jobs . European Journal of Operational Research , 91 : 517 – 527 .
- Matanachai , S. and Yano , C. A. 2001 . Balancing mixed-model assembly lines to reduce work overload . IIE Transactions , 33 : 29 – 42 .
- Narahari , Y. and Khan , L. M. 1996 . Modeling reentrant manufacturing system with inspection stations . Journal of Manufacturing Systems , 15 : 367 – 378 .
- Narahari , Y. and Viswanadham , N. 1994 . Transient analysis of manufacturing systems performance . IEEE Transactions on Robotics and Automation , 10 : 230 – 244 .
- Nguty , T. A. , Philpott , J. D. , Ekere , N. N. , Teckle , S. , Salam , B. and Rajkumar , D. 2000 . Rework techniques process evaluation for chip scale packages . IEEE Transactions on Electronics Packaging Manufacturing , 23 : 200 – 207 .
- Pendse , R. D. , Afshari , B. , Hefkubger , B. , Matta , F. and Rastogi , V. 1994 . Demountable tab—a new path for tab technology . IEEE Transactions on Components Packaging and Manufacturing Technology Part B–Advanced Packaging , 17 : 527 – 536 .
- Sha , D. Y. , Hsieh , L. F. and Chen , K. J. 2001 . Wafer rework strategies at the photolithography stage . International Journal of Industrial Engineering—Theory Applications and Practice , 8 : 122 – 130 .
- Son , Y. K. and Park , C. S. 1987 . Economic measure of productivity, quality and flexibility in advanced manufacturing systems . Journal of Manufacturing Systems , 6 : 193 – 207 .
- Urban , T. L. 1998 . Analysis of production systems when run length influences product quality . International Journal of Production Research , 36 : 3085 – 3094 .
- Viswanadham , N. , Sharma , S. M. and Taneja , M. 1996 . Inspection allocation in manufacturing systems using stochastic techniques . IEEE Transactions on Systems, Man and Cybernetics—Part A: Systems and Humans , 36 : 222 – 230 .
- Yerelan , S. and Tan , B. 1997 . Analysis of multistation production systems with limited buffer capacity part 2: The decomposition method . Mathematics and Computer Modeling , 25 : 109 – 123 .