A COMPREHENSIVE BIOMECHANICAL MODEL USING STRENGTH, STABILITY, AND COF CONSTRAINTS TO PREDICT HAND FORCE EXERTION CAPABILITY UNDER SAGITTALLY SYMMETRIC STATIC CONDITIONS

REFERENCES

• Anderson , Charles Kevin , “ A Biomechanical Model of the Lumbosacral Joint for Lifting Activities ,” Ph.D. thesis (Industrial Engineering) , University of Michigan , Ann Arbor ( 1983 ) .
   Google Scholar
• Beer , Ferdinand , P. ,Johnston, Jr., E., Russell , Vector Mechanics for Engineers, Statics and Dynamics , 3rd Edition , McGraw-Hill Book Company , New York ( 1977 ) .
   Google Scholar
• Burggraaf , J. D. , “ An Isometric Biomechanical Model for Sagittal Plane Leg Extension .” M.S. thesis (Industrial Engineering) , University of Michigan , Ann Arbor ( 1972 ) .
   Google Scholar
• Chaffin , Don , B. , Andersson, Gunnar , Occupational Biomechanics , John Wiley & Sons, Inc. , New York , 147 – 232 ( 1984 ).
   Google Scholar
• Chaffin , Don , B. , Andres , Robert , O. ,Garg, Aran, “ Volitional Postures During Maximal Push/Pull Exertions in the Sagittal Plane ,” Human Factors , 25 , 5 , 541 – 550 ( 1983 ).
   PubMed Web of Science ®Google Scholar
• Chaffin , Don , B. , Baker , William , H. , “ A Biomechanical Model for Analysis of Symmetric Sagittal Plane Lifting ,” IIE Transactions , 2 , 1 , 16 – 27 ( March 1970 ).
   Google Scholar
• Oaike , H.H. , Muscle Strength and Endurance in Man , Prentice-Hall , Englewood Cliffs , 39 – 51 ( 1966 ).
   Google Scholar
• Freivalds , Andris , Chaffin , Don , B. , Garg, Aran, Lee , Kwan , S. , “ A Dynamic Biomechanical Evaluation of Lifting Maximum Acceptable Loads ,” Journal of Biomechanics , 17 , 4 , 251 – 262 ( 1984 ).
   PubMed Web of Science ®Google Scholar
• Grieve , D. W. , “ The Postural Stability Diagram (PSD) Personal Constraints on the Static Exertion of Force ,” Ergonomics , 22 , 10 , 1155 – 1164 ( 1979a ).
   PubMed Web of Science ®Google Scholar
• Grieve , D. W. , “ Environmental Constraints on the Static Exertion of Force PSD Analysis in Task-Design ,” Ergonomics , 22 . 10 , 1165 – 1175 ( 1979b ).
   PubMed Web of Science ®Google Scholar
• Hughes , Richard , E. , “ Lumbar Muscle Forces During Asymmetric Loading of the Torso ,” Chapter IV, Ph.D. thesis (Industrial and Operations Engineering) , University of Michigan , Ann Arbor ( 1991 ).
   Google Scholar
• Kroemer , K. H. Eberhard , “ Horizontal Push and Pull Forces ,” Applied Ergonomics , 5 , 2 , 94 – 102 ( 1974 ).
   PubMed Web of Science ®Google Scholar
• Leskinen , Timo , P. J. , “ Comparison of Static and Dynamic Biomechanical Models ,” Ergonomics , 28 , 1 , 285 – 291 ( 1985 ).
   PubMed Web of Science ®Google Scholar
• Martin , James , B. , Chaffin , Don , B. , “ Biomechanical Computerized Simulation of Human Strength in Sagittal-Plane Activities ,” IIE Transactions , 4 , 1 , 19 – 28 ( March 1972 ).
   Google Scholar
• McGill , Stuart , M. , and Norman , Robert , W. , “ Dynamicallyand Statically Determined Low Back Moments During Lifting ,” Journal of Biomechanics , 18 , 12 , 877 – 885 ( 1985 ).
   PubMed Web of Science ®Google Scholar
• McGill , Stuart , M. , Norman , Robert , W. , “ Reassessment of the Role of Intra-abdominal Pressure in Spinal Compression ,” Ergonomics , 30 , 11 , 1565 – 1588 ( 1987 ).
   PubMed Web of Science ®Google Scholar
• National Institute for Occupational Safety Health, “ A Work Practices Guide for Manual Lifting ,” U.S. Dept. of Health and Human Services (NIOSH) , Cincinnati , OH , Report No. 81-122 ( 1981 ).
   Google Scholar
• Pope , M. H. , Andersson , G. B. J. , Broman. H., Svensson , M. , Zetterberg , C , “ Electromyographic Studies of the Lumbar Trunk Musculature During the Development of Axial Torques ,” Journal of Orthopaedic Research , 4 , 288 – 297 ( 1986 ).
   PubMed Web of Science ®Google Scholar
• Schanne , Frederick , J. , “ A Three-Dimensional Hand Force Capability Model for the Seated Operator ,” Ph.D. thesis (Industrial Engineering) , University of Michigan , Ann Arbor ( 1972 ) .
   Google Scholar
• Stobbe , Terrence , J. , “ The Development of a Practical Strength Testing Program for Industry ,” Ph.D. thesis (Industrial Engineering) , University of Michigan , Ann Arbor ( 1982 ) .
   Google Scholar