Evolution of manufacturing processes for fiber-reinforced thermoset tanks, vessels, and silos: a review

References

• Applicator . 2010 . Rolling Bearings—Dynamic Load Ratings and Rating Life , 2nd ed available at http://www.applicator. se, accessed November 11, 2009,
   Google Scholar
• Ashby , M. F. 2000 . Multi-objective optimization in material design and selection . Acta Materialia , 48 ( 1 ) : 349 – 369 .
   Web of Science ®Google Scholar
• ASME RPT-1 . 1989 . Reinforced Thermoset Plastic Corrosion Resistant Equipment .
   Google Scholar
• ASTM D 3299-88 . 1988 . Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks
   Google Scholar
• ASTM D 4097-88 . 1998 . Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks
   Google Scholar
• Avni , B. , Lukov , L. , Liberman , Y. and Bachmutsky , O. 2000 . Methods for Manufacture of Reinforced Composite Vessel U.S. Patent No. 6563793
   Google Scholar
• American Water Works Association . 1984 . AWWA. D120-84 Thermosetting Fiberglass-Reinforced Plastic Tanks
   Google Scholar
• Bader , M. G. 2002 . Selection of composite materials and manufacturing routes for cost-effective performance . Composites Part A-Applied Science and Manufacturing , 33 ( 7 ) : 913 – 934 .
   Web of Science ®Google Scholar
• Barbero , E. J. 1999 . Introduction to Composite Materials Design , Philadelphia : Taylor & Francis .
   Google Scholar
• Beckwith , S. W. 2008 . Filament winding vs. fiber placement manufacturing technologies . SAMPE Journal , 44 ( 44 ) : 54 – 55 .
   Google Scholar
• Bert , J. 1990 . Plural Component External Mix Spray Gun and Method U.S. Patent No. 5303865
   Google Scholar
• Cohen , D. , Mantell , S. C. and Zhao , L. Y. 2001 . The effect of fiber volume fraction on filament wound composite pressure vessel strength . Composites Part B-Engineering , 32 ( 5 ) : 411 – 427 .
   Web of Science ®Google Scholar
• Crescent Consultants Limited . 2010 . Cadfil , Devby , , UK : Crescent Consultants Ltd. .
   Google Scholar
• Crutchlow , R. 2004 . Changing from open to closed moulding . Reinforced Plastics , 48 ( 8 ) : 40 – 41 .
   Google Scholar
• Dement , J. M. 1975 . Environmental aspects of fibrous glass productiona and utilization . Environmental Research , 9 ( 3 )
   PubMed Web of Science ®Google Scholar
• Department of Environmental Quality, State of Oregon . 2010 . Fibreglass Manufacturing and the Environment Available at http://www.deq.state.or.us/aq/factsheets/07aq001Fiberglass.pdf, accessed March 3, 2010
   Google Scholar
• Division of Pollution Prevention, and Environmental Assistance . 2010 . Fibreglass and Composite Manufacturing Available at http://www.p2pays.org/ref/32/31015.htm, accessed March 3, 2010
   Google Scholar
• DSM Chemicals, . 1970 . Automatic spray-up of GRP silos . Composites , 1 ( 5 ) : 321
   Google Scholar
• EDO Fibre Corporation . 2009 . available at: http://www.edocorp.com/EDOFiberScience.htm, accessed November 11, 2009
   Google Scholar
• European Parliament . 1997 . Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the Approximation of the Laws of the Member States Concerning Pressurebreak Equipment
   Google Scholar
• European Parliament . 2004 . Directive 2004/42/CE of the European Parliament and of the Council of 21 April 2004 on the Limitation of Emissions of Volatile Organic Compounds Due to the Use of Organic Solvents in Certain Paints and Varnishes and Vehicle Refinishing Products and Amending Directive 1999/13/EC
   Google Scholar
• Farshad , M. and Necola , A. 2004 . Strain corrosion of glass fibre-reinforced plastic pipes . Polymer Testing , 23 ( 5 ) : 517 – 521 .
   Web of Science ®Google Scholar
• Gascons , M. , Blanco , N. and Matthys , K. 2008 . “ Mechanical and manufacturing optimization of a large vessel through simulations ” . In Proceedings Texcomp 9 Conference 151 – 164 .
   Google Scholar
• Goldsworthy , W. B. , Korzeniowski , G. J. and Carter , C. T. 2003 . Method for Fabricating Composite Pressure Vessels U.S. Patent No. 6565793
   Google Scholar
• Guasti , F. and Rosi , E. 2000 . Pressure vessels: a possible application of low energy e-beam curing . SAMPE Journal , 36 ( 36 ) : 25 – 30 .
   Google Scholar
• Gutowski , T. G. and Dillon , G. 1992 . The elastic-deformation of lubricated carbon-fiber bundles—comparison of theory and experiments . Journal of Composite Materials , 26 ( 16 ) : 2330 – 2347 .
   Web of Science ®Google Scholar
• Hancock , S. G. and Potter , K. D. 2006 . The use of kinematic drape modelling to inform the hand lay-up of complex composite components using woven reinforcements . Composites Part A-Applied Science and Manufacturing , 3 ( 37 ) : 413 – 422 .
   Web of Science ®Google Scholar
• Hojjati , M. , Ardebili , V. S. and Hoa , S. V. 1995 . Design of domes for polymeric composite pressure-vessels . Composites Engineering , 5 ( 5 ) : 51 – 59 .
   Web of Science ®Google Scholar
• Hwang , T. K. , Hong , C. S. and Kim , C. G. 2003 . Size effect on the fiber strength of composite pressure vessels . Composite Structures , 59 ( 4 ) : 489 – 498 .
   Web of Science ®Google Scholar
• Jacob , A. 2002 . Spray-up offers process improvements . Reinforced Plastics , 46 ( 1 ) : 32 – 34 .
   Google Scholar
• Jones , D. 1998 . FRP improves design of sewage treatment equipment . Reinforced Plastics , 42 ( 8 ) : 44 – 46 .
   Google Scholar
• Keim , J. 2006 . Crude awakening: rising resin costs have driven up fiberglass pool prices. What are builders and manufacturers doing to soften the blow available at http://www.poolspanews.com/2006/062/062qonr_fiber3.html, accessed 3 March 2010
   Google Scholar
• Kim , M. G. , Kang , S. G. , Kim , C. G. and Kong , C. W. 2007 . Tensile response of graphite/epoxy composites at low temperatures . Composite Structures , 79 ( 1 ) : 84 – 89 .
   Web of Science ®Google Scholar
• Kootsookos , A. and Burchill , P. J. 2004 . The effect of the degree of cure on the corrosion resistance of vinyl ester/glass fibre composites . Composites Part A-Applied Science and Manufacturing , 23 ( 5 ) : 501 – 508 .
   Web of Science ®Google Scholar
• Koussios , S. , Bergsma , O. K. and Beukers , A. 2004 . Filament winding. Part 2: generic kinemaitc model and its solutions . Composites Part A-Applied Science and Engineering , 35 ( 1 ) : 197 – 212 .
   Web of Science ®Google Scholar
• Levend , P. and Katirci , N. 2002 . Design of fiber-reinforced composite pressure vessels under various loading conditions . Composite Structures , 58 ( 58 ) : 83 – 95 .
   Google Scholar
• Li , J. , Zhang , C. , Liang , R. and Wang , B. 2005 . Statistical characterization and robust design of RTM processes . Composites Part A: Applied Science and Manufacturing , 36 ( 5 ) : 564 – 580 .
   Web of Science ®Google Scholar
• Liang , C. C. , Chen , H. W. and Wang , C. H. 2002 . Optimum design of dome contour for filament-wound composite pressure vessel based on a shape factor . Composite Structures , 58 ( 4 )
   Web of Science ®Google Scholar
• Long , A. C. , Rudd , C. D. , Blagdon , M. and Smith , P. 1996 . Characterizing the processing and performance of aligned reinforcements during preform manufacture . Composites Part A-Applied Science and Manufacturing , 27 ( 4 ) : 247 – 253 .
   Web of Science ®Google Scholar
• Mansvile , J. 2004 . Roving designed for spray-up processing . Reinforced Plastics , 5 ( 48 ) : 21
   Google Scholar
• Marks , J. D. 1986 . Process for Lining Composite Vessels U.S. Patent No. 4596619
   Google Scholar
• Material . 2010 . CADWIND , Brussels, Belgium : Matenol .
   Google Scholar
• Mazumdar , S. 2002 . Composites Manufacturing: Materials, Product, and Process Engineering , Boca Raton , FL : CRC Press .
   Google Scholar
• Mertiny , P. and Gold , A. 2007 . Quantification of leakage damage in high-pressure fibre-reinforced polymer composite tubular vessels . Polymer Testing , 26 ( 26 ) : 172 – 179 .
   Web of Science ®Google Scholar
• Messager , T. , Pyrz , M. , Gineste , B. and Chauchot , P. 2002 . Optimal laminations of thin underwater composite cylindrical vessels . Composite Structures , 58 ( 4 ) : 529 – 537 .
   Web of Science ®Google Scholar
• Minamoto , K. , Nagano , M. , Inaoka , T. , Kitano , T. , Ushijima , K. , Fukuda , Y. and Futatsuka , M . 2002 . Skin problems among fibreglass reinforced plastics factory workers in Japan . Industrial Health , 40 ( 1 ) : 42 – 50 .
   PubMed Web of Science ®Google Scholar
• Mohan , R. 1987 . High Pressure Vessel Construction U.S. Patent No. 4699288
   Google Scholar
• Monroy , C. M. , Skordos , A. A. and Sutcliffe , M.P.F . 2008 . Design selection methodology for composite structures . Materials and Design , 29 ( 2 ) : 418 – 426 .
   Web of Science ®Google Scholar
• Newbery , A. L. 2001 . Large diameter FRP tanks mark progess in Mexico . Reinforced Plastics , 45 ( 11 ) : 40 – 42 .
   Google Scholar
• Newbery , A. L. and Gunung , P. 2005 . World’s largest FRP acid storage tanks . Reinforced Plastics , 49 ( 10 ) : 26 – 29 .
   Google Scholar
• Ochoa , O. O. and Salama , M. M. 2005 . Offshore composites: transition barriers to an enabling technology . Composites Science and Technology , 65 ( 15–16 ) : 2588 – 2596 .
   Web of Science ®Google Scholar
• Palardy , G. , Hubert , P. , Haider , M. and Lessard , L. 2008 . Optimization of RTM processing parameters for Class A surface finish . Composites Part B: Engineering , 39 ( 7-8 ) : 1280 – 1286 .
   Web of Science ®Google Scholar
• Pentair . Triton Series of Pentair Available at http://www.pentairpool.com/pdfs/triclearproDS.pdf, accessed April 3, 2010
   Google Scholar
• Peters , S. T. 2003 . “ Improvements in FEA of composite overwrapped pressure vessels ” . In Proceedings of the 41st ISTC 44 – 48 .
   Google Scholar
• Poltank . 2006 . Product technical catalogue available at http://www.poltank.com, accessed November 11, 2009
   Google Scholar
• Rosato , D. and Grove , C. 1964 . Filament Winding: Its Development, Manufacture, Application and Design , New York , NY : John Wiley .
   Google Scholar
• Rudd , C. D. , Long , A. C. , Kendall , K. N. and Mangin , C.G. E. 1997 . Liquid Moulding Technologies , Cambridge , , UK : Woodhead Publishing Limited .
   Google Scholar
• Rudd , C. D. , Turner , M. R. , Long , A. C. and Middleton , V. 2009 . Tow placement studies for liquid composite moulding . Composites Part A-Applied Science and Manufacturing , 30 ( 9 ) : 1105 – 1121 . 1999
   Web of Science ®Google Scholar
• Shen , F. C. 1995 . A filament-wound structure technology overview . Materials Chemistry and Physics , 42 ( 2 ) : 96 – 100 .
   Web of Science ®Google Scholar
• Shirinzadeh , B. , Alici , G. , Foong , C. W. and Cassidy , G. 2004 . Fabrication process of open surfaces by robotic fibre placement . Robotics and Computer-Integrated Manufacturing , 20 ( 1 ) : 17 – 28 .
   Web of Science ®Google Scholar
• Simacek , P. and Advani , S. G. 2004 . Desirable features in mold filling simulations for liquid composite molding processes . Polymer Composite , 25 ( 4 ) : 355 – 367 .
   Web of Science ®Google Scholar
• Skinner , M. L. 2006 . New applications and approaches expand market for composites software . Reinforced Plastics , 50 ( 6 ) : 24 – 28 .
   Google Scholar
• Srinivasan , R. , Karandikar , H. M. and Mistree , F. 1991 . Understanding design and manufacture interaction using compromise decision support problems: 1—A formulation for composite pressure vessels . Computers and Structures , 40 ( 3 ) : 679 – 692 .
   Web of Science ®Google Scholar
• Starbuck , J. M. Low Cost Manufacturing for Composite Natural Gas Vehicle (NGV) Fuel Tanks , Dearborn, MI : Automotive Technology Development Customers’ Coordination Meeting .
   Google Scholar
• STI . 2001 . ACT-100 Specification for External Corrosion Protection of FRP Composite Underground Storage Tanks
   Google Scholar
• Stringer , L. G. 1997 . Optimization of the wet lay-up/vacuum bag process for the fabrication of carbon fibre epoxy composites with high fibre fraction and low void content . Composites , 5 ( 20 ) : 441 – 452 . 1989
   Google Scholar
• Van Lieshout , L. Resin Transfer Moulding Available at http://commons.wikimedia.org/wiki/File:RTM_process.png, accessed November 2009
   Google Scholar
• Van Lieshout , L. 2007 . Hand Lay-up Moulding. Visualization of the Hand Lay-Up Process Available at http://nl.wikipedia.org/wiki/Bestand:Hand_lay-up_moulding.png, accessed November 2009
   Google Scholar
• Van Lieshout , L. 2009a . Spray Lay-up Moulding Available at http://commons.wikimedia.org/wiki/File:Spray_lay-up_process.png, accessed November 2009
   Google Scholar
• Van Lieshout , L. 2009b . Wet Compresion Moulding Available at http://commons.wikimedia.org/wiki/File:Wet_compression_moulding.png, accessed November 2009
   Google Scholar
• Vasiliev , V. , Krikanov , A. and Razin , A. 2006 . New generation of filament-wound composite pressure vessels for commercial applications . Composite Structures , 62 ( 3-4 ) : 449 – 459 . 2003
   Web of Science ®Google Scholar
• Wang , K. , Kely , D. and Dutton , S. 2002 . Multi-objective optimisation of composite aerospace structrures . Composite Structures , 57 ( 1-4 ) : 141 – 148 .
   Web of Science ®Google Scholar
• Wilkinson , S. Research into using recycled mixed plastics-fibreglass to produce coil carriers for the steel industry Technical report PLA0007-11. Water and Resources Action Programme (WRAP)
   Google Scholar
• Williams , J. C. and Starke , E. A. 2003 . Progress in structural materials for aerospace systems . Acta Materialia , 51 ( 19 ) : 5775 – 5799 . 2002
   Web of Science ®Google Scholar