Consolidation Behavior of High-Fe Manganese Ore Sinters with Natural Basicity

References

• Ahmed, A.M., El-Geassy, A.H.A., and Mishreky, M.L., 2015, “Crude steel directly from pre-reduced high manganese containing iron ore.” Ironmaking and Steelmaking, 42(3), pp. 161–168.
   Web of Science ®Google Scholar
• Ahmed, A., Ghali, S., El-Fawakhry, M.K., El-Faramawy, H., and Eissa, M., 2014, “Silicomanganese production utilising local manganese ores and manganese rich slag.” Ironmaking and Steelmaking, 41(4), pp. 310–320.
   Web of Science ®Google Scholar
• Ding, Y., Chen, X., and Wang, X., 2004, “Sintering process experiment in Yunnan Jianshui manganese mine.” Yunnan Metallurgy, 33(1),pp. 18–22. ( in Chinese).
   Google Scholar
• Dmitriev, A.N., Solomakhin, A.V., Kashin, V.V., and Verushkin, V.V., 2003, “Making sinter from concentrate of low-grade manganese ore for use in the production of ferrosilicomanganese.” Metallurgist, 47(3–4), pp. 99–103.
   Web of Science ®Google Scholar
• Eissa, M., Fathy, A., Ahmed, A., El-Mohammady, A., and El-Fawakhry, K., 2004, “Factors affecting silicomanganese production using manganese rich slag in the charge.” Tenth International Ferroalloys Congress, pp. 245–253.
   Google Scholar
• El-Faramawy, H., Mattar, T., Eissa, M., El-Fawakhry, K., and Ahmed, A.M., 2004a, “Demanganisation of high manganese pig iron to produce high manganese slag.” Ironmaking and Steelmaking, 31(1), pp. 23–30.
   Web of Science ®Google Scholar
• El-Faramawy, H., Mattar, T., Fathy, A., Eissa, M., and Ahmed, A.M., 2004b, “Silicomanganese production from manganese rich slag.” Ironmaking and Steelmaking, 31(1), pp. 31–36.
   Web of Science ®Google Scholar
• Faria, G.L., Tenório, J.A.S., Jannotti, N., and Araújo, F.D.S., 2015, “A geometallurgical comparison between lump ore and pellets of manganese ore.” International Journal of Mineral Processing, 137, pp. 59–63.
   Web of Science ®Google Scholar
• Faria, G.L., Tenório, J.A.S., Jannotti, N., and Araújo, F.D.S., 2013, “Disintegration on heating of a Brazilian manganese lump ore.” International Journal of Mineral Processing, 124, pp. 132–137.
   Web of Science ®Google Scholar
• Huang, X., 2013, Metallurgy principle of iron and steel, fourth ed., Beijing: Metallurgical Industry Press.
   Google Scholar
• Jiang, T., Yu, Z., Peng, Z., Rao, M., Zhang, Y., and Li, G., 2015, “Preparation of BF burden from titanomagnetite concentrate by composite agglomeration process (CAP).” ISIJ International, 55(8), pp. 1599–1607.
   Web of Science ®Google Scholar
• Kononov, R., Ostrovski, O., and Ganguly, S., 2009, “Carbothermal solid state reduction of manganese ores: 2. Non-isothermal and isothermal reduction in different gas atmospheres.” ISIJ International, 49(8), pp. 1107–1114.
   Web of Science ®Google Scholar
• Lin, S., 1990, “Sintering mineralization mechanism of the manganese ore.” Journal of the Chinese Ceramic Society, 5, pp. 45–52. (in Chinese).
   Google Scholar
• Lv, L.M., Adam, M., Kilburn, M., Hapugoda, S., Somerville, M., Jahanshahi, S., and Mathieson, J.G., 2013, “Substitution of charcoal for coke breeze in iron ore sintering.” ISIJ International, 53(9), pp. 1607–1616.
   Web of Science ®Google Scholar
• Ooi, T. C., Campbell-Hardwick, S., Zhu, D., and Pan, J., 2014, “Sintering performance of magnetite–hematite–goethite and hematite–goethite iron ore blends and microstructure of products of sintering.” Mineral Processing and Extractive Metallurgy Review, 35(4), pp. 266–281.
   Web of Science ®Google Scholar
• Polikreti, K. and Maniatis, Y., 2004, “Distribution changes of Mn2+ and Fe3+ on weathered marble surfaces measured by EPR spectroscopy.” Atmospheric Environment, 38, pp. 3617–3624.
   Web of Science ®Google Scholar
• Su, Z., Zhang, Y., Liu, B., Chen, J., Li, G., and Jiang, T., 2016, “Behavior of SnO2 in the tin-bearing iron concentrate during a reduction sintering process.” Journal of Mining and Metallurgy, Section B: Metallurgy, 2016, in press.
   Google Scholar
• Singh, V., Ghosh, T.K., Ramamurthy, Y., and Tathavadkar, V., 2011, “Beneficiation and agglomeration process to utilize low-grade ferruginous manganese ore fines.” International Journal of Mineral Processing, 99, pp. 84–86.
   Web of Science ®Google Scholar
• Sun, Y., Hao, J., Yang, S., and Lv, Q., 2011, “Discussion on sintering technological parameter of manganese ore.” Chinese Manganese Industry, 29(1),pp. 24–26. ( in Chinese).
   Google Scholar
• Tan, Z., Mei, G., Li, W., Zeng, K., Liang, R., and Zeng, X., 2004, Metallurgy of Manganese, Changsha: Central South University Press. (in Chinese).
   Google Scholar
• VereinDeutscherEisenhüttenleute (VDEH), 1981, Schlackenatlas slag atlas, Nuremberg: Dusseldorf Steel Press.
   Google Scholar
• Wang, E., 2007, “The resources of Chinese manganese ore.” Chinese Battery Industry, 12(3),pp. 184–188. ( in Chinese).
   Google Scholar
• Wang, Y., 2004, “Resources of Mn-ores and development of EMM: A review.” Chinese Manganese Industry, 22(8), pp. 26–30. ( in Chinese).
   Google Scholar
• Zandi, M., Martinez-Pacheco, M., and Fray, T.A.T., 2010, “Biomass for iron ore sintering.” Minerals Engineering, 23, pp. 1139–1145.
   Web of Science ®Google Scholar
• Zhang, B., Wang, Z., Gong, X., and Guo, Z., 2013, “Characterization of precipitated carbon by XPS and its prevention mechanism of sticking during reduction of Fe2O3 particles in the fluidized bed.” ISIJ International, 53(3), pp. 411–418.
   Web of Science ®Google Scholar
• Zhang, H., Rao, M., Fan, Z., Zhang, Y., Li, G., and Jiang, T., 2012, “Effects of circulated flue gas components on iron ore sintering.” ISIJ International, 52(12), pp. 2139–2144.
   Web of Science ®Google Scholar
• Zhang, Y., Liu, B., Su, Z., Li, G., Fan, Z., and Jiang, T., 2014, “Effect of CO and CO2 content in suction gas on sintering process for iron ores.” ISIJ International, pp. 54(8). 1991–1993.
   Web of Science ®Google Scholar
• Zhang, Y., You, Z., Li, G., and Jiang, T., 2013a, “Manganese extraction by sulfur-based reduction roasting–acid leaching from low-grade manganese oxide ores.” Hydrometallurgy, 133(2013). pp. 126–132.
   Web of Science ®Google Scholar
• Zhang, Y., Luo, W., You, Z., Su, Z., Li, G., and Jiang, T., 2013b, “Optimizing the sintering process of low-grade ferromanganese ores.” 4th International Symposium on High Temperature Metallurgical Processing, Conference Proceeding, pp. 527–534.
   Google Scholar
• Zhao, J., 1986, “Pulverization mechanism and main minerals of fluxed manganese carbonate sintering.” Chinese Manganese Industry, 4, pp. 34–38. (in Chinese).
   Google Scholar
• Zhu, D., Li, J., Pan, J., and He, A., 2008, “Sintering behaviours of chromite fines and the consolidation mechanism.” International Journal of Mineral Processing, 86, pp. 58–67.
   Web of Science ®Google Scholar