2,102
Views
30
CrossRef citations to date
0
Altmetric
Review

A Review of Low Grade Manganese Ore Upgradation Processes

, &

References

  • Abbruzzese, C., Duarte, M. Y., Paponetti, B., and Toro, L., 1990, “Biological and chemical processing of low-grade manganese ores.” Minerals Engineering, 3(3). pp. 307–318. doi:10.1016/0892-6875(90)90126-V
  • Abdel-Khalek, N. A., Selim, K. A., Hassan, M. M., MR, M., Saleh, A. M., and Ramadan, A. M., 2017, “The Role of Interaction between Paenibacillus polymyxa Bacteria and Pyrolusite-Hematite System through Bioflotation.” International Research Journal of Engineering and Technology, 4(4). pp. 1121–1129.
  • Abeidu, A. M., 1973, “The feasibility of activation of manganese minerals flotation.” Transactions of the Japan Institute of Metals, 14(1). pp. 45–49. doi:10.2320/matertrans1960.14.45
  • Amankwah, R. K., and Pickles, C. A., 2005, “Microwave calcination and sintering of manganese carbonate ore.” Canadian Metallurgical Quarterly, 44(2). pp. 239–247. doi:10.1179/cmq.2005.44.2.239
  • Andrade, E. M., Costa, B. L. C. M., Alcântara, G. A. G., and Lima, R. M. F., 2012, “Flotation of manganese minerals and quartz by sodium oleate and water glass.” Latin American Applied Research, 42(1). pp. 39–43.
  • Antonioli, F. M., 1950, “A mineral dressing study of the benefication of philipsburg manganese carbonate ore.” Bachelors Theses and Reports, 304. pp. 1928–1970.
  • Aplan, F. F., 1985, Handbook Society of mining engineering, manganese, In SME Mineral Processing Vol. 2, (N. L. Weiss, Ed.), Society of Mining Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers, pp. 27.6–27.10.
  • Arafa, M. A., El-Nozahi, S. M. R., and Yousef, A. A., 1992, “Cationic flotation of some manganese oxides.” Neue Hütte, 37(12). pp. 451–457.
  • Arjmand, M., Leion, H., Mattisson, T., and Lyngfelt, A., 2014, “Investigation of different manganese ores as oxygen carriers in chemical-looping combustion (CLC) for solid fuels.” Applied Energy, 113. pp. 1883–1894. doi:10.1016/j.apenergy.2013.06.015.
  • Asai, S., Konishi, Y., and Takasaka, Y., 1995, “Bioleaching of rare metals from manganese nodules by Thiobacillus Ferrooxidans.” Mineral Processing and Extractive Metallurgy Review,15, 1–4. pp. 140–141. doi:10.1080/08827509508914164
  • Azizi, D., Shafaei, S. Z., Noaparast, M., and Abdollahi, H., 2012, “Modeling and optimization of low-grade Mn bearing ore leaching using response surface methodology and central composite rotatable design.” Transactions of Nonferrous Metals Society of China, 22(9). pp. 2295–2305. doi:10.1016/S1003-6326(11)61463-5
  • Baba, A. A., Ibrahim, L., Adekola, F. A., Bale, R. B., Ghosh, M. K., Sheik, A. R., Pradhan, S. R., Ayanda, O. S., and Folorunsho, I. O., 2014, “Hydrometallurgical processing of manganese ores: A Review.” Journal of Minerals and Materials Characterization and Engineering, 2(03). pp. 230–247. doi:10.4236/jmmce.2014.23028
  • Beukes, N. J., Swindell, E. P., and Wabo, H., 2016, “Manganese deposits of Africa.” Episodes, 39(2). pp. 285–317. doi:10.18814/epiiugs/2016/v39i2/95779
  • BHP Billiton Report, 2009, BHP Billiton: Annual Report 2009, South Africa: BHP Billiton Corporate Centre. http://www.bhpbilliton.com/~/media/bhp/documents/investors/reports/2009/annualreport2009.pdf?la=en.
  • Biswas, A., Chakraborti, N., and Sen, P. K., 2009, “A genetic algorithms based multi-objective optimization approach applied to a hydrometallurgical circuit for ocean nodules.” Mineral Processing & Extractive Metallurgy Review, 30(2). pp. 163–189. doi:10.1080/08827500802397284
  • Bolton, G. L., Sefton, V. B., and Zubryckyj, N., 1982, “Removal of manganese and chloride ions from aqueous acidic zinc sulphate solutions for the recovery of zinc.” EP Patent No. 66024.
  • Buckenham, M. H., 1961, “Beneficiation of manganese ores with particular reference to the treatment of a low-grade ore from Viti Levu, Fiji. New Zealand.” Journal of Geology and Geophysics, 4(2). pp. 136–147. doi:10.1080/00288306.1961.10423134
  • Bureau of Indian Standards (BIS), 2006, IS 11895: Classification of manganese ore, ferruginous manganese ore, silicious manganese ore, Dioxide manganese ore and manganiferrous iron, New Delhi: Bureau of Indian Standards.
  • Cai, Z., Feng, Y., Li, H., Du, Z., and Liu, X., 2013, “Co-recovery of manganese from low-grade pyrolusite and vanadium from stone coal using fluidized roasting coupling technology.” Hydrometallurgy, 131. pp. 40–45. doi:10.1016/j.hydromet.2012.10.002.
  • Cai, Z., Feng, Y., Li, H., and Liu, X., 2015, “Response surface optimization of reductive leaching manganese from low-grade pyrolusite using biogas residual as reductant.” Mineral Processing and Extractive Metallurgy Review, 36(1). pp. 1–6. doi:10.1080/08827508.2012.762915
  • Calderon-Rodarte, J., Lopez-Valdivieso, A., Aragon-Pina, A., Reyes-Bahena, J. L., Gallegos-Garcia, M. I., Zapata-Velazquez, A., and Robledo-Cabrera, A., 2017, “Mineralogy and silver distribution in argentiferous manganese ores from la encantada mines in Mexico.” Physicochemical Problems Mineral Process, 53(1). pp. 591–600.
  • Cawlfield, D. W., and Ward, L. R., 1995, “Integrated process of using hydrochloric acid to separate zinc oxide and manganese oxide.” US Patent No. 5411643.
  • Chen, J., Li, L., Chen, G., Peng, J., and Srinivasakannan, C., 2017, “Rapid thermal decomposition of manganese ore using microwave heating.” Journal of Alloys and Compounds, 699. pp. 430–435. doi:10.1016/j.jallcom.2016.12.379.
  • Chengxian, L., 1992, “Separation test of high iron manganese ore and its mechanism.” China’s Manganese Industry, Z. pp. 1.
  • Çil, G., and Yıldız, K., 2014, “Carbothermal reduction of calcined and mechanically activated manganese carbonate ore.” The Online Journal of Science and Technology, 4. pp. 3.
  • Clark, S. J., Donaldson, J. D., and Khan, Z. I., 1996, “Heavy metals in the environment. Part VI: recovery of cobalt values from spent cobalt/manganese bromide oxidation catalysts.” Hydrometallurgy, 40. pp. 381–392. doi:10.1016/0304-386X(95)00007-4.
  • Coetsee, T., 2017, “The effect of processing parameters on Ferromanganese alloy carbon content in Mamatwan ore reduction.” Mineral Processing and Extractive Metallurgy Review, 38(2). pp. 116–125. doi:10.1080/08827508.2016.1271332
  • Coetsee, T., 2018, “MnO reduction in high carbon ferromanganese production: practice and theory.” Mineral Processing and Extractive Metallurgy Review, 39(5). pp. 351–358. doi:10.1080/08827508.2018.1459618
  • Coetsee, T., 2019, “The role of manganese ore reduction morphology development in setting reduction mechanisms.” Minerals Engineering, 137. pp. 217–231. doi:10.1016/j.mineng.2019.04.006.
  • Comba, P., Lei, K. P., and Carnahan, T. G., 1991, CaF2-Enhanced HCI Leaching of a Manganese-Bearing Silicate Ore, Washington, D.C., U.S: Dept. of the Interior, Bureau of Mines.
  • Das, A. P., Sukla, L. B., Pradhan, N., and Nayak, S., 2011, “Manganese biomining: a review.” Bio-resource Technology, 102(16). pp. 7381–7387. doi:10.1016/j.biortech.2011.05.018
  • Das, A. P., Sukla, L. B., Pradhan, N., and Nayak, S., 2012, “Fungal Biomining of low grade manganese ore,” Conference: XXVI International Mineral Processing Conference (IMPC-2012), New Delhi, India.
  • Das, G. K., Anand, S., Das, R. P., Muir, D., and Singh, P., 2000, Sulfur Dioxide–A Leachant for Oxidic Materials in Aqueous and Non-aqueous Media, New Delhi, India, Vol. 20, pp. 4–6.
  • Dasgupta, H. C., Sambasivarao, V. V., and Krishna, C., 1999, “Chemical environments of deposition of ancient iron- and manganese-rich sediments and cherts:.” Sedimentary Geology, 125. pp. 83–98. doi:10.1016/S0037-0738(98)00148-1.
  • Davis, C. W., 1930, “Dissolution of Various Manganese Minerals.” BuMines RI, 3024. pp. 11.
  • De Michelis, I., Ferella, F., Beolchini, F., Olivieri, A., and Vegliò, F., 2009, “Characterization and classification of solid wastes coming from reductive acid leaching of low-grade manganiferous ore.” Journal of Hazardous Materials, 162(2). pp. 1285–1291. doi:10.1016/j.jhazmat.2008.06.024
  • Deng, L., Qu, B., Su, S. J., Ding, S. L., and Sun, W. Y., 2018, “Separation of manganese from iron in the SO2 reductive leaching iron-rich pyrolusite ore: leaching mechanism and kinetics.” Arabian Journal for Science and Engineering, 44(6), pp. 5335–5344.
  • Deutman, E. G., 1922, The roasting and magnetic separation of Wisconsin ores and the utilization of the by-products. Professional Degree Thesis, Missouri University of Science and Technology, USA 55.
  • Devaney, F. D., and Clemmer, J. B., 1929, “Floating of carbonate and oxide manganese ores-A further step in the utilization of low- grade reserves.” Engineering and Mining Journal, 128(13). pp. 506–508.
  • Dwivedi, D., Randhawa, N. S., Saroj, S., and Jana, R. K., 2016, “An overview of manganese recovery by hydro and pyro-metallurgical routes.” Journal of the Institution of Engineers (india): Series D, 98(1). pp. 147–154.
  • Eissa, M., El-Faramawy, H., Ahmed, A., Nabil, S., and Halfa, H., 2012, “Parameters affecting the production of high carbon ferromanganese in closed submerged arc furnace.” Journal of Minerals and Materials Characterization and Engineering, 11(01). pp. 1. doi:10.4236/jmmce.2012.111001
  • El-Geassy, A. A., Nasr, M. I., Yousef, M. A., Khedr, M. H., and Bahgat, M., 2000, “Behavior of manganese oxides during magnetising reduction of Baharia iron ore by CO–CO2 gas mixture.” Ironmaking & Steelmaking, 27(2). pp. 117–122. doi:10.1179/030192300677417
  • El-Hazek, M. N., Lasheen, T. A., and Helal, A. S., 2006, “Reductive leaching of manganese from low grade Sinai ore in HCl using H2O2 as reductant.” Hydrometallurgy, 84(3). pp. 187–191. doi:10.1016/j.hydromet.2006.05.006
  • Eramet, 2017, ERAMET Annual Report 2017, Paris, France: ERAMET. http://www.eramet.com/en/our-activities/extracting-generating-value/manganese/our-activity
  • Eric, R. H., 1995, “An overview on manganese alloy production and related fundamental research in South Africa.” Mineral Processing and Extractive Metallurgy Review, 15(1–4). pp. 191–200. doi:10.1080/08827509508914197
  • Feng, Y. L., Cai, Z. L., Li, H. R., Du, Z. W., and Liu, X. W., 2013, “Fluidized roasting reduction kinetics of low-grade pyrolusite coupling with pretreatment of stone coal.” International Journal of Minerals, Metallurgy, and Materials, 20(3). pp. 221–227. doi:10.1007/s12613-013-0716-5
  • Ferron, C. J., 2000, “Purification of zinc-ore leach solutions by oxidation of manganese impurity.” WO Patent No. 2000061826.
  • Fleytlich, I. U., Sergeev, V. V., Pashkov, G. L., Luboshnikova, K. S., Sergeeva, V. V., Makarov, I. V., Galantseva, T. V., and Kholkin, A. I., 1995, “Purification of cobalt solutions from manganese by extraction with mixture of organic acids.” Mineral Processing and Extractive Metallurgy Review, 15(1–4). pp. 166–167. doi:10.1080/08827509508936974
  • Francis, W., and Momade, Y., 1996, “Sulfuric acid leaching of the Nsuta manganese carbonate ore.” Hydrometallurgy, 40(1). pp. 123–134. doi:10.1016/0304-386X(94)00089-L
  • Friedmann, D., Pophanken, A. K., and Friedrich, B., 2017, “Pyrometallurgical treatment of high manganese containing deep sea nodules.” Journal of Sustainable Metallurgy, 3(2). pp. 219–229. doi:10.1007/s40831-016-0070-8
  • Fuerstenau, D. W., and Han, K. N., 1983, “Metallurgy and processing of marine manganese nodules.” Mineral Processing and Extractive Metallurgy Review, 1(1–2). pp. 1–83. doi:10.1080/08827508308952589
  • Fuerstenau, M. C., Han, K. N., and Miller, J. D., 1986, Chapter 17: Flotation Behaviour of Chromium and Manganese Minerals, in Advances in Mineral Processing: A Half Century of Progress in Application of Theory to Practice, Society for Mining Metallurgy, pp. 289–307.
  • Fuerstenau, M. C., and Rice, D. A., 1968, “Flotation Characteristics of Pyrolusite.” Society of Mining Engineers of AIME, Transactions, 241(4). pp. 453–457.
  • Gaal, S., Lou, D., Wasbø, S., Ravary, B., and Tangstad, M., 2007, “Melting phenomena in ferromanganese production.” INFACON XI, pp.247–257. doi:10.1007/s12012-007-9002-y
  • Gao, Y., 2011, Pre-reduction and magnetic separation of low grade manganese ore. PhD Thesis, University of Utah, USA.
  • Gao, Y., Olivas-Martinez, M., Sohn, H. Y., Kim, H. G., and Kim, C. W., 2012, “Upgrading of low-grade manganese ore by selective reduction of iron oxide and magnetic separation.” Metallurgical and Materials Transactions B, 43(6). pp. 1465–1475. doi:10.1007/s11663-012-9731-6
  • Gasik, M., ed., 2013, Handbook of Ferroalloys: Theory and Technology, Oxford, UK:  Elsevier Ltd.
  • Geveci, A. H., Keceli, H., Topkaya, Y., and Sevinc, N., 1998, “Calcination of the Turkish manganese ore from Denizli-Tavas region.” Fizykochemiczne Problemy Mineralurgii/Physicochemical Problems of Mineral Processing(Poland), 32. pp. 203–213.
  • Ghosh, J. S., and Agate, A. D., 2015, “Microbiological beneficiation of low grade manganese ores: A review.” Journal of Mining World Express (MWE), 4, pp. 52–71.
  • Gordon, Y., Nell, J., and Yaroshenko, Y., 2018, “Manganese ore thermal treatment prior to smelting.” KnE Engineering, 3(5). pp. 71–86. doi:10.18502/keg.v3i5.2656
  • Grey, J. J. T., 1946, “The Defect in the magnetic susceptibility of manganese dioxide and other compounds of manganese.” Journal of the American Chemical Society, 68.4. pp. 605–608. doi:10.1021/ja01208a022.
  • Grieco, G., Kastrati, S., and Pedrotti, M., 2014, “Magnetic enrichment of braunite-rich manganese ore at different grain sizes.” Mineral Processing and Extractive Metallurgy Review, 35(4). pp. 257–265. doi:10.1080/08827508.2013.793680
  • Gunson, A., Klein, B., and Veiga, M., 2010, Improving mine/mill water network design by reducing water and energy requirements, InProceedings of 42th Annual Canadian Mineral Processors Operators Conference, (D. Fragomeni, Ed.), Ottawa (Canada): Westin Ottawa.
  • Gutzmer, J., and Beukes, N. J., 2002, “Iron and manganese ore deposits: mineralogy, geochemistry, and economic geology.” Encyclopaedia of Life Support Systems, UNESCO, Section 5.15. 6.2. 2002.
  • Gutzmer, J., Beukes, N. J., Kleyenstuber, A. S. E., and Mintek, A. M., 1995, “Magnetic hausmannite from hydrothermally altered manganese ore in the Palaeoproterozoic Kalahari manganese deposit, Transvaal Super group, South Africa.” Mineralogical Magazine, 59(4). pp. 703–716. doi:10.1180/minmag.1995.059.397.12
  • Haider, S. K., Azimi, G., Duan, L., Anthony, E. J., Patchigolla, K., Oakey, J. E., Leion, H., Mattisson, T., and Lyngfelt, A., 2016, “Enhancing properties of iron and manganese ores as oxygen carriers for chemical looping processes by dry impregnation.” Applied Energy, 163. pp. 41–50. doi:10.1016/j.apenergy.2015.10.142.
  • Haiki, K., Okazaki, M., and Ishiyama, T., 2015, Reconsideration of polymetallic nodule processing methods-further improvement of existing methods. In Eleventh Ocean Mining and Gas Hydrates Symposium, International Society of Offshore and Polar Engineers, Kona, Hawaii Big Island, USA.
  • Harambure, A. D., 2018, Overview of the Manganese Market, IMnI Annual Conference, June 18-20, 2018, Kuala Lumpur, Malaysia. https://www.jupitermines.com/cproot/819/3/10._AC_2018_Aloys_dHarambure_ENG.pdf
  • Harvey, J. M., 2012, Manganese in Natural and Artificial Photosynthesis, In Manganese: Chemical Properties, Medicinal Uses and Environmental Effects Vol. 2, (S. T. Gan and H. R. Kong, Eds.), Washington, USA: Nova Science Publishers, pp. 27–50.
  • Healey, M. V., 1929, Beneficiation of Manganese Ores, Master’s Thesis, Metallurgical Engineering, University of Missouri, School of Mines and Metallurgy.
  • Holappa, L., 2010, “Towards sustainability in ferroalloy production.” Journal of the Southern African Institute of Mining and Metallurgy, 110(12). pp. 703–710.
  • Holappa, L., and Xiao, Y., 2004, “Slags in ferroalloys production-review of present knowledge.” Journal of the Southern African Institute of Mining and Metallurgy, 104(7). pp. 429–437.
  • Hsiaohong, C., and Chongyue, F., 1995a, “Kinetics of leaching manganese nodules in presence of zinc sulfide.” Mineral Processing and Extractive Metallurgy Review, 15(1–4). pp. 101–114. doi:10.1080/08827509508914189
  • Hsiaohong, C., and Chongyue, F., 1995b, “Leaching of manganese nodule in dilute acid solutions in presence of zinc sulfide concentrate.” Mineral Processing and Extractive Metallurgy Review, 15(1–4). pp. 95–100. doi:10.1080/08827509508914188
  • Huichun, L. G. H., 2004, “Pilot test on separating mugui loose and soft manganese ore by slon magnetic separators.” Express Information of Mining Industry, 4. pp. 11.
  • IBM Report, 2008, Indian Minerals Year Book, Nagpur, India: Indian Bureau of Mines Publication.
  • IBM Report, 2014, Marker Survey on Manganese Ore, Nagpur, India: Indian Bureau of Mines Publication.
  • Jin, X. Z., Yang, Z. P., Chen, Z. B., and Ma, Y. J., 2006, “A study on enriching manganese by roasting low-grade manganese carbonate ore with ammonium salt.” China Manganese Industries, 24(1). pp. 28.
  • Johnston, T. L., Shelton, S. M., Fine, M. M., and Calhoun, W. A., 1942, “Concentration of manganese-bearing ore from the interstate manganese Co.” Johnson County, Tenn., Bureau of Mines Report of Investigations, 3623, 13.
  • Kholmogorov, A. G., Zhyzhaev, A. M., Kononov, U. S., Moiseeva, G. A., and Pashkov, G. L., 2000, “The production of manganese dioxide from manganese ores of some deposits of the Siberian region of Russia.” Hydrometallurgy, 56(1). pp. 1–11. doi:10.1016/S0304-386X(99)00084-5
  • Kholodov, V. N., and Nedumov, R. I., 2009, “Association of manganese ores and phosphorite-bearing facies in sedimentary sequences: communication 1. Parastereses and parageneses of phosphorous and manganese in Mesozoic-Cenozoic and Upper Paleozoic rocks:.” Lithology and Mineral Resources, 44. pp. 1–18. doi:10.1134/S0024490209010015.
  • Kniprath, E., 1970, Precipitation of manganese or cobalt oxides and hydroxides. DE Patent No. 1812332.
  • Koursaris, A., and See, J. B., 1979, “Reactions in the production of high-carbon ferromanganese from Mamatwan ore.” Journal of South African Institute of Minerals and Metallurgy, 79(6). pp. 149–158.
  • Kuleshov, V. N., 2011, “Manganese deposits: communication 1. Genetic models of manganese ore formation.” Lithology and Mineral Resources, 46(5). pp. 473–493. doi:10.1134/S0024490211050038
  • Kuleshov, V. N., 2012, “A superlarge deposit—kalahari manganese ore field (Northern Cape, South Africa): geochemistry of isotopes (δ13C and δ18O) and genesis.” Lithology and Mineral Resources, 47(3). pp. 217–233. doi:10.1134/S0024490212030054
  • Laznicka, P., 1992, “Manganese deposits in the global lithogenetic system: quantitative approach:.” Ore Geology Reviews, 7. pp. 279–356. doi:10.1016/0169-1368(92)90013-B.
  • Lee, M. L., Jae, W. K., Ung, U. C., and Jong, J. S., 1973, “A Study on the Preparation of Electrolytic Manganese Dioxide.” Journal of the Korean Chemical Society, 17(4). pp. 306–313.
  • Li, J., Li, X., Hu, Q., Wang, Z., Zheng, J., Wu, L., and Zhang, L., 2009, “Study of extraction and purification of Ni, Co and Mn from spent battery material.” Hydrometallurgy, 99(1). pp. 7–12. doi:10.1016/j.hydromet.2009.05.018
  • Lin, Q. Q., Gu, G. H., Wang, H., Zhu, R. F., Liu, Y. C., and Fu, J. G., 2016, “Preparation of manganese sulfate from low-grade manganese carbonate ores by sulfuric acid leaching.” International Journal of Minerals, Metallurgy, and Materials, 23(5). pp. 491–500. doi:10.1007/s12613-016-1260-x
  • Liu, D. X., Wei, Q. J., Guo, C. H., and Yuan, C. X., 2013a, “Study on acid-leaching and electrowinning process of a manganese carbonate ore.” Institute of Minerals and Metals (C), 22(3). pp. 63.
  • Liu, X., Chen, C., Zhao, Y., and Jia, B., 2013b, “A review on the synthesis of manganese oxide nanomaterials and their applications on lithium-ion batteries.” Journal of Nanomaterials, 2013. pp. 1–7.
  • Liu, B., Zhang, Y., Su, Z., Peng, Z., Li, G., and Jiang, T., 2017a, “Thermodynamic Analysis and Reduction of MnO2 by Methane–hydrogen Gas Mixture.” JOM, 69(9). pp. 1669–1675. doi:10.1007/s11837-017-2456-x
  • Liu, W., Liu, G., Kou, Q., and Xiao, S., 2017b, “Novel process for producing hierarchical carbide derived carbon monolith and low carbon ferromanganese from high carbon ferromanganese.” RSC Advances, 7(54). pp. 33875–33882. doi:10.1039/C7RA04973K
  • Luo, N., Wei, D. Z., Shen, Y. B., Liu, W. G., and Gao, S. L., 2017, “Effect of calcium ion on the separation of rhodochrosite and calcite.” Journal of Materials Research and Technology, 7(1). pp. 96–101.
  • Luo, N., Zhang, G., Feng, Q., Lu, Y., and Ou, L., 2012, “Study on the flotation behavior and mechanism of rhodochrosite and calcite.” Nonferrous Metals, Mineral Processing Section, 4. pp. 011.
  • Ma, Z., and Ek, C., 1991, “Rate processes and mathematical modelling of the acid leaching of manganese carbonate ore.” Hydrometallurgy, 27. pp. 125–139. doi:10.1016/0304-386X(91)90061-P.
  • Madias, J., 2011, “A review of the production of Ferromanganese in blast furnace.” In AISTech Proceedings, 1. pp. 401–412.
  • Malayoglu, U., 2010, “Study on the gravity processing of manganese ores.” Asian Journal of Chemistry, 22(4). pp. 3292.
  • Manson, P. G., Groutsch, J. V., Mayze, R. S., and White, D., 1997, Process development and plant design for the Cawse nickel project, ALTA Metallurgical Service, Perth, Western Australia.
  • Martin, S. T., 2005, “Precipitation and Dissolution of Iron and Manganese Oxides.” Environmental Catalysis, 1. pp. 61–82.
  • Maynard, J., 2003, “Manganiferous Sediments, Rocks, and Ores.” Treatise on Geochemistry, 7. pp. 289–308. doi:10.1016/B0-08-043751-6/07099-7
  • Maynard, J. B., 2010, “The chemistry of manganese ores through time: a signal of increasing diversity of earth-surface environments.” Economic Geology, 105(3). pp. 535–552. doi:10.2113/gsecongeo.105.3.535
  • Mehdilo, A., and Irannajad, M., 2014, “Evaluation of pyrolusite flotation behavior using a cationic collector.” Journal of Mining Science, 50(5). pp. 982–993. doi:10.1134/S1062739114050184
  • Metal Bulletin, 2018, Five effects of high manganese ore prices, https://www.metalbulletin.com/Article/3803941/Five-effects-of-highmanganese-ore-prices.html
  • Mishra, P. P., Mohapatra, B. K., and Mahanta, K., 2009, “Upgradation of low-grade siliceous manganese ore from Bonai-Keonjhar Belt, Orissa, India.” Journal of Minerals and Materials Characterization and Engineering, 8(01). pp. 47. doi:10.4236/jmmce.2009.81005
  • Mishra, S., Mohapatra, B. K., Dash, N., and Rao, D. S., 2011, “Ore petrography of low-grade siliceous manganese ores from the Bonai-Keonjhar belt, Orissa, India: the influence of mineral-fabric on their beneficiation.” Mining Science and Technology (china), 21(6). pp. 803–808. doi:10.1016/j.mstc.2011.06.025
  • Monhemius, A. J., 1977, “Precipitation diagrams for metal hydroxides, sulfates, arsenates and phosphates.” Transactions of the Institution of Mining & Metallurgy, Section C 86. pp. C202–C206.
  • Monhemius, A. J., 1980, The extractive metallurgy of deep-sea manganese nodules, In Topics in Non-Ferrous Extractive Metallurgy (A. R. Burkin, Ed.), London: SCI, pp. 42–69.
  • Mpho, M., Samson, B., and Ayo, A., 2013, “Evaluation of reduction roasting and magnetic separation for upgrading Mn/Fe ratio of fine ferromanganese.” International Journal of Mining Science and Technology, 23.4. pp. 537–541. doi:10.1016/j.ijmst.2013.07.012.
  • Mukherjee, A., Raichur, A. M., Natarajan, K. A., and Modak, J. M., 2004, “Recent developments in processing ocean manganese nodules—A critical review.” Mineral Processing and Extractive Metallurgy Review, 25(2). pp. 91–127. doi:10.1080/08827500490433188
  • Narayanan, P. I. A., 1957, “Manganese ore beneficiation plants of India.” Indian Mining Journal, 5. pp. 23–28.
  • Narayanan, P. I. A., and Subrahmanyan, N. N., 1959, “Beneficiation of low grade manganese ores of India.” Council of Scientific & Industrial Research, 1. pp. 13–31.
  • National Research Council, 1981, Manganese Reserves and Resources of the World and Their Industrial Implications, Washington, DC: National Academy Press; N.T.I.S. pp. 133–141.
  • Nurjaman, F., Saputra, E. B., Ferdian, D., and Suharno, B., 2018, “Effect of slag basicity in ferromanganese production using medium-grade manganese ore from East Java-Indonesia.” Mineral Processing and Extractive Metallurgy, 127(2). pp. 121–126. doi:10.1080/03719553.2017.1330838
  • O’Shaughnessy, P., Kim, J. K., and Lee, B. W., 2004, “February. The smelting of manganese carbonate ore.” In Proceedings: Tenth International Ferroalloys Congress, Cape Town, South Africa, 1,4.
  • Okajima, Y., 1975, “Treatment of manganese nodules.” DE Patent No. 2522969.
  • Olsen, S. E., Olsen, S., Tangstad, M., and Lindstad, T., 2007, Production of Manganese Ferroalloys, Norway: Tapir Academic Press.
  • Pahlman, J. E., and Khalafalla, S. E., 1988, Leaching of Domestic Manganese Ores with Dissolved SO2, Pittsburgh, PA: U.S. Department of the Interior.
  • Pani, S., Dash, N., Mohapatra, B. K., and Singh, S. K., 2019, “Siliceous manganese ore from Eastern India: A potential resource for ferrosilicon-manganese production.” High Temperature Materials and Processes, 38. pp. 425–435. doi:10.1515/htmp-2018-0081.
  • Park, C. F., Barbosa, A. L. M., Dorr, J. V. N., and Guild, P. W., 1951, “Notes on the manganese ores of Brazil.” Economic Geology, 46(1). pp. 1–22. doi:10.2113/gsecongeo.46.1.1
  • Park, K. H., Kim, H. I., and Das, R. P., 2005, “Selective acid leaching of nickel and cobalt from precipitated manganese hydroxide in the presence of chlorine dioxide.” Hydrometallurgy, 78.3. pp. 271–277. doi:10.1016/j.hydromet.2005.05.001.
  • Parrent, M. D., 2012, Separation of Pyrolusite and Hematite by Froth Flotation, PhD Thesis University of Alberta, Edmonton, Canada.
  • Patil, D. S., Chavan, S. M., and Oubagaranadin, J. U. K., 2016, “A review of technologies for manganese removal from wastewaters.” Journal of Environmental Chemical Engineering, 4(1). pp. 468–487. doi:10.1016/j.jece.2015.11.028
  • Percival, R. V., Schroeder, C. H., Miller, A. S., and Leape, J. P., 2013, Environmental regulation: law, science, and policy, In Wolters Kluwer Law & Business.
  • Pereira, M. J., Lima, M. M. F., and Lima, R. M. F., 2014, “Calcination and characterization studies of a Brazilian manganese ore tailing.” International Journal of Mineral Processing, 131. pp. 26–30. doi:10.1016/j.minpro.2014.08.003.
  • Pienaar, P. C., and Smith, W. F. P. A., 1992, “Case study of the production of high-grade manganese sinter from low-grade Mammwan manganese ore.” INFACON 6. Proceeding of 6th 11th Ferroalloy Congress, Cape Town. Johannesburg, South Africa: SAIMM, 1, pp. 131–138.
  • Polulyakh, L. A., Dashevskii, V. Y., and Yusfin, Y. S., 2014, “Manganese-ferroalloy production from Russian manganese ore.” Steel in Translation, 44(9). pp. 617–624. doi:10.3103/S0967091214090125
  • Post, J. E., 1999, “Manganese oxide minerals: crystal structures and economic and environmental significance.” Proceedings of Notational Academy of Science, 96. pp. 3447–3454.
  • Premchand, P., and Jana, R. K., 1999, Processing of Polymetallic Sea Nodules: An Overview. In Third ISOPE Ocean Mining Symposium, Goa, India: International Society of Offshore and Polar Engineers.
  • Rahimi, S., Irannajad, M., and Mehdilo, A., 2017, “Comparative studies of two cationic collectors in the flotation of pyrolusite and calcite.” International Journal of Mineral Processing, 167. pp. 103–112. doi:10.1016/j.minpro.2017.07.016.
  • Randhawa, N. S., Hait, J., and Jana, R. K., 2016, “A brief overview on manganese nodules processing signifying the detail in the Indian context highlighting the international scenario.” Hydrometallurgy, 165. pp. 166–181. doi:10.1016/j.hydromet.2015.09.013.
  • Rao, G. V., Acharya, B. C., Murty, B. V. R., Mohanty, J. N., Swamy, Y. V., Chattopadhay, P., and Tripathy, A. K., 1998a, “Removal of phosphorus and enrichment of manganese from a complex ferruginous manganese ore.” Physical Separation in Science and Engineering, 9(2). pp. 109–123.
  • Rao, G. V., Mohapatra, B. K., and Tripathy, A. K., 1998b, “Enrichment of the manganese content by wet high intensity magnetic separation from Chikla manganese ore, India.” Physical Separation in Science and Engineering, 9.2. pp. 69–82.
  • Rashad, M. M., 2006, “Synthesis and magnetic properties of manganese ferrite from low grade manganese ore.” Materials Science and Engineering: B, 127(2). pp. 123–129. doi:10.1016/j.mseb.2005.10.004
  • Rath, S. S., Tripathy, S. K., Rao, D. S., and Biswal, S. K., 2018, Characterization and Reduction Roasting Studies of an Iron Rich Manganese Ore, India: Transactions of the Indian Institute of Metals, pp. 1–12.
  • Reddy, U., and Gopalkrishna, S. J., 2018, “Beneficiation of Ferruginous Manganese Ore.” International Journal of Research, 7. pp. 186–190.
  • Renyi, C., and Qin, B., 2005, The Manganese Ore Resources in China and Their Prospecting, Beijing: China Geological Survey. pp. 100035.
  • Reuter, M., Xiao, Y., and Boin, U., 2004, Recycling and environmental issues of metallurgical slags and salt fluxes. In VII International Conference on Molten Slags Fluxes and Salts, Cape town, South Africa: The South African Institute of Mining and Metallurgy, pp. 349–356.
  • Ringdalen, E., Gaal, S., Tangstad, M., and Ostrovski, O., 2010, “Ore melting and reduction in silicomanganese production.” Metallurgical and Materials Transactions B, 41(6). pp. 1220–1229. doi:10.1007/s11663-010-9350-z
  • Roskill, 2015, Manganese: Global Industry Markets & Outlook to 2020, London, England: Roskill Information Services.
  • Rousseau, M., Simon, B., Renato, B., and Contessotto, W. T., . T., 2016, “Beneficiation of low grade Manganese Ore by Jigging in a Specially designed ore dressing unit,” IMPC 2016: XXVIII International Mineral Processing Congress Proceedings, Quebec City, Canada - ISBN: 978-1-926872-29-2.
  • Roy, S., 1968, “Mineralogy of the different genetic types of manganese deposits.” Economic Geology, 63(7). pp. 760–786. doi:10.2113/gsecongeo.63.7.760
  • Roy, S., 2000, “Late Archean initiation of manganese metallogenesis: its significance and environmental controls.”.” Ore Geology Reviews, 17. pp. 179–198. doi:10.1016/S0169-1368(00)00013-5.
  • Roy, S., 2006, “Sedimentary manganese metallogenesis in response to the evolution of the Earth system.” Earth-Science Reviews, 77(4). pp. 273–305. doi:10.1016/j.earscirev.2006.03.004
  • Sankaran, C., Sen, M. C., and Bhatnagar, P. P., 1962, “Thermal beneficiation of low grade ferruginous Manganese ores.” NML Technical Journal, 4.2. pp. 26–33.
  • Santos, O. D. S. H., de Freitas Carvalho, C., Da Silva, G. A., and Dos Santos, C. G., 2015, “Manganese ore tailing: optimization of acid leaching conditions and recovery of soluble manganese.” Journal of Environmental Management, 147. pp. 314–320. doi:10.1016/j.jenvman.2014.09.020.
  • Sato, T., and Nakamura, T., 1985, “Solvent extraction of divalent metals from sulphuric acid solutions by dialkylphosphoric acid.” Journal of Mining. Metallurgy, Institute of Japan, 101(1167). pp. 309–312. doi:10.2473/shigentosozai1953.101.1167_309
  • Schmitz, M., Linderholm, C., Hallberg, P., Sundqvist, S., and Lyngfelt, A., 2016, “Chemical-looping combustion of solid fuels using manganese ores as oxygen carriers.” Energy & Fuels, 30(2). pp. 1204–1216.
  • Schottman, J. F., 1988, “Status of Supply and Use of Iron, Steel, and Ferroalloys.” Mineral Processing and Extractive Metallurgy Review, 3(1–4). pp. 45–54. doi:10.1080/08827508808952614
  • Sedumedi, B. K., and Pan, X. D., 2015, Benchmarking in the Ferromanganese Production Processes. Kiev, Ukraine: The Fourteenth International Ferroalloys Congress.
  • Sen, P. K., 2010, “Metals and materials from deep sea nodules: an outlook for the future.” International Materials Reviews, 55(6). pp. 364–391. doi:10.1179/095066010X12777205875714
  • Singh, V., and Biswas, A., 2017, “Physicochemical processing of low grade ferruginous manganese ores.” International Journal of Mineral Processing, 158, 10. pp. 35–44. doi:10.1016/j.minpro.2016.11.013.
  • Singh, V., Biswas, A., Tripathy, S. K., Chatterjee, S., and Chakerborthy, T. K., 2016, “Smart ore blending methodology for ferromanganese production process.” Ironmaking & Steelmaking, 43(7). pp. 481–487. doi:10.1080/03019233.2015.1108623
  • Singh, V., Ghosh, T. K., Ramamurthy, Y., and Tathavadkar, V., 2011, “Beneficiation and agglomeration process to utilize low-grade ferruginous manganese ore fines.” International Journal of Mineral Processing, 99(1). pp. 84–86. doi:10.1016/j.minpro.2011.03.003
  • Singh, V., Nag, S., and Tripathy, S. K., 2013, “Particle flow modelling of dry induced roll magnetic separator.” Powder Technology, 244. pp. 85–92. doi:10.1016/j.powtec.2013.03.053.
  • Song, S., Lopez-Valdivieso, A., and Ding, Y., 1999, “Effects of nonpolar oil on hydrophobic flocculation of hematite and rhodochrosite fines.” Powder Technology, 101(1). pp. 73–80. doi:10.1016/S0032-5910(98)00150-8
  • Souza, H. S., Braga, A. S., and Oliveira, A. H., 2016, “Concentration of manganese tailings via reverse flotation in an acid medium.” Rem: Revista Escola De Minas, 69.1. pp. 85–90.
  • Stevens, T. E., Pearce, C. J., Whitten, C. N., Grant, R. P., and Monson, T. C., 2017, “Self-assembled array of tethered manganese oxide nanoparticles for the next generation of energy storage.” Scientific Reports, 7. pp. 44191. doi:10.1038/srep44191.
  • Sun, D., Li, M. L., Li, C. H., Cui, R., and Zheng, X. Y., 2014, “A green enriching process of Mn from low grade ore of manganese carbonate.” In Applied Mechanics and Materials, 644. pp. 5427–5430. doi:10.4028/www.scientific.net/AMM.644-650.5427.
  • Sun, W. Y., Su, S. J., Wang, Q. Y., and Ding, S. L., 2013, “Lab-scale circulation process of electrolytic manganese production with low-grade pyrolusite leaching by SO2.” Hydrometallurgy, 133. pp. 118–125. doi:10.1016/j.hydromet.2012.12.005.
  • Sutyrin, Y. E., 2002, “Carbonate Ores–the raw-materials base for manganese in Russia.” Metallurgist, 46.9. pp. 297–300. doi:10.1023/A:1021910317627.
  • Tangstad, M., 2013, Handbook of Ferroalloys: chapter 6, In Ferrosilicon and Silicon Technology, (M. Gasik, Ed.), London, UK: Elsevier Inc. Chapters.
  • Tangstad, M., Ringdalen, E., Manilla, E., and Davila, D., 2016, “Production of FeMn alloys with heat treated Mn-nodules.” In: J. Y. Hwang et al. (eds.) 7th International Symposium on High-Temperature Metallurgical Processing. Springer, Cham.
  • Tathavadkar, V., Singh, V., Mishra, P. K., Mallick, P., and Nanda, B. D., 2010, “Effect of manganese ore blends on performance of submerged arc furnace for ferromanganese production.” Ironmaking & Steelmaking, 37(2). pp. 103–111. doi:10.1179/030192309X12506804200825
  • Tian, X., Wen, X., Yang, C., Liang, Y., Pi, Z., and Wang, Y., 2010, “Reductive leaching of manganese from low-grade manganese dioxide ores using corncob as reductant in sulfuric acid solution.” Hydrometallurgy, 100(3). pp. 157–160. doi:10.1016/j.hydromet.2009.11.008
  • Tishchenko, K. I., Shornikova, A. S., and Sulamanidze, V. K., 1981, Development and Introduction of the Technology for Beneficiation of Carbonate Manganese Ores, Congress: 12th International Mineral Processing.
  • Tripathy, S. K., Banerjee, P. K., and Suresh, N., 2015, “Effect of desliming on the magnetic separation of low-grade ferruginous manganese ore.” International Journal of Minerals, Metallurgy, and Materials, 22.7. pp. 661–673. doi:10.1007/s12613-015-1120-0.
  • Tsusue, A., 1967, “Magnesian kutnahorite from Ryujima mine.” Japan. American Mineralogist: Journal of Earth and Planetary Materials, 52(11–12). pp. 1751–1761.
  • Urquhart, R. C., 1980, “The physico-chemical properties of slags associated with the production of high-carbon ferromanganese.” Canadian Metallurgical Quarterly, 19(3). pp. 323–327. doi:10.1179/cmq.1980.19.3.323
  • USBM Report, 1947, Beneficiation of oxide and carbonate manganese ores from Philipsburg District, Montana, USBM R.I.4138, U. S.
  • Varentsov, I. M., 1996, Manganese Ores of Supergene Zone: Geochemistry of Formation: Dordrecht, Dardrecht, Netherlands: Kluwer Academic Publishers, pp. 342.
  • Wang, Y., and Zhou, C., 2002, “Hydrometallurgical process for recovery of cobalt from zinc plant residue.” Hydrometallurgy, 63(3). pp. 225–234. doi:10.1016/S0304-386X(01)00213-4
  • Wells, R. R., Ipsen, A. O., and Vincent., K. C., 1947, “Beneficiation of oxide and carbonate manganese ores from Philipsburg District, Montana, USBM.” R.I.4138. Report of investigations / United States Department of the Interior, Bureau of Mines; 4138, pp. 14.
  • World Energy Report, 2013, World Energy Scenarios: Composing Energy Futures to 2050, London, United Kingdom: World Energy Council. https://www.worldenergy.org/publications/2013/world-energy-scenarios-composing-energy-futures-to-2050.
  • World Ocean Review: Marine Resources – Opportunities and Risks, 2014, Maribus and Future Ocean, Malta: International Ocean Institute Headquarters (IOI HQ), University of Malta, pp. 13–16.
  • Wu, F. F., Zhong, H., Wang, S., and Lai, S. F., 2014, “Kinetics of reductive leaching of manganese oxide ore using cellulose as reductant.” Journal of Central South University, 21(5). pp. 1763–1770. doi:10.1007/s11771-014-2122-1
  • Wu, Y., Shi, B., Ge, W., Yan, C. J., and Yang, X., 2015, “Magnetic separation and magnetic properties of low-grade manganese carbonate ore.” Journal of Minerals, Metals & Materials Society, 67(2). pp. 361–368. doi:10.1007/s11837-014-1212-8
  • Yang, Z. C., Feng, Y. L., Li, H. R., Wang, W. D., and Qing, T. E. N. G., 2014, “Effect of biological pretreatment on flotation recovery of pyrolusite.” Transactions of Nonferrous Metals Society of China, 24(5). pp. 1571–1577. doi:10.1016/S1003-6326(14)63227-1
  • Ye, Q., Zhu, H., Zhang, L., Liu, P., Chen, G., and Peng, J., 2014, “Carbothermal reduction of low-grade pyrolusite by microwave heating.” RSC Advances, 4(102). pp. 58164–58170. doi:10.1039/C4RA08010F
  • Yongping, H., and Mulong, Y., 1988, “Controlled dispersion-shear fluocculation separation of ultrafine apatite from rhodochrosite.” In Production and Processing of Fine Particles, 1. pp. 353–362.
  • Yoon, C., Kim, H., Park, J., and Yoo, K., H., 2015, “The distribution of particle size and composition of manganese nodule comminuted during lifting.” Geosystem Engineering, 18:6. pp. 348–352. doi:10.1080/12269328.2015.1103198.
  • You, Z., Li, G., Peng, Z., Qin, L., Zhang, Y., and Jiang, T., 2017, “Reductive roasting of iron-rich manganese oxide ore with elemental sulfur for selective manganese extraction.” Journal of Mining and Metallurgy B: Metallurgy, 53(2). pp. 115–122. doi:10.2298/JMMB150223008Y
  • Zhang, W., Singh, P., and Muir, D., D., 2002, “Oxidative precipitation of manganese with SO2/O2 and separation from cobalt and nickel.” Hydrometallurgy, 63. pp. 127–135. doi:10.1016/S0304-386X(01)00205-5.
  • Zhang, W. S., and Cheng, C. Y., 2007, “Manganese Metallurgy Review. Part II: manganese Separation and Recovery from Solution.” Hydrometallurgy, 89. pp. 160–177. doi:10.1016/j.hydromet.2007.08.009.
  • Zhang, Y., Du, M., Liu, B., Su, Z., Li, G., and Jiang, T., 2017, “Separation and recovery of iron and manganese from high-iron manganese oxide ores by reduction roasting and magnetic separation technique.” Separation Science and Technology, 52(7). pp. 1321–1332. doi:10.1080/01496395.2017.1284864
  • Zhang, Y., Liu, B., You, Z., Su, Z., Wei Luo, L. G., and Jiang, T., 2016, “Consolidation behavior of high-Fe manganese ore sinters with natural basicity.” Mineral Processing and Extractive Metallurgy Review, 37(5). pp. 333–341. doi:10.1080/08827508.2016.1218870.
  • Zhou, F., Chen, T., Yan, C., Liang, H., Chen, T., Li, D., and Wang, Q., 2015a, “The flotation of low-grade manganese ore using a novel linoleate hydroxamic acid.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 466. pp. 1–9. doi:10.1016/j.colsurfa.2014.10.055.
  • Zhou, F., Yan, C., Wang, H., Sun, Q., Wang, Q., and Alshameri, A., 2015b, “Flotation behavior of four C18 hydroxamic acids as collectors of rhodochrosite.” Minerals Engineering, 78. pp. 15–20. doi:10.1016/j.mineng.2015.04.006.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.