References
- Abiko, T., I. Park, and T. H. Okabe. 2004. In Ti-2003 science and technology, ed. G. Lutjering and J. Albrecht, 253–60. Weinheim: Wiley-VCH.
- Amarchand, S., T. R. Ramamohan, and P. Ramakrishnan. 2001. Synthesis of fine titanium powders via solution route. Mineral Processing and Extractive Metallurgy Review 22 (1):279–85. doi:https://doi.org/10.1080/08827509808962502.
- Araci, K., D. Mangabhai, and K. Akhtar. 2015. Production of titanium by the Armstrong process. Titanium Powder Metallurgy 9: 149–62.
- Baker, T. N. 2019. Titanium microalloyed steels. Ironmaking & Steelmaking 46 (1):1–55. doi:https://doi.org/10.1080/03019233.2018.1446496.
- Baufeld, B., O. Biest, and R. Gault. 2010. Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties. Materials & Design 31:S106–S110. doi:https://doi.org/10.1016/j.matdes.2009.11.032.
- Biswas, A. 2005. Porous NiTi by thermal explosion mode of SHS: Processing, mechanism and generation of single phase microstructure. Acta Materialia 53 (5):1415–25. doi:https://doi.org/10.1016/j.actamat.2004.11.036.
- Boyer, R., G. Welsch, and E. Collings. 1994. Materials properties handbook: Titanium alloys. Materials Park: ASM International.
- Butterman, W. C. 1988. Current status of the specialty metals. Mineral Processing and Extractive Metallurgy Review 3 (1–4):69–86. doi:https://doi.org/10.1080/08827508808952616.
- Chen, C. Y., J. Li, and X. Lu. 2012. Extraction of Ti and Ti alloy from titaniferous residue using SOM process. Advanced Materials Research 550-553:1811–16. doi:https://doi.org/10.4028/ww w.scientific.net/AMR.550-553.1811.
- Chen, G. S., O. Masazumi, and O. Takeo. 1987. Electrochemical studies of titanium ions (Ti4+) in equimolar KCl-NaCl molten salts with 1 wt% K2TiF6. Electrochimica Acta 32 (11):1637–42. doi:https://doi.org/10.1016/0013-4686(87)90017-X.
- Chen, G. Z., D. Fray, and T. Farthing. 2000. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride. Nature 407 (6802):361–64. doi:https://doi.org/10.1038/35030069.
- Chen, L., S. Wen, G. Xu, and H. Xie. 2013. A novel process for titanium sand by magnetic separation and gravity concentration. Mineral Processing and Extractive Metallurgy Review 34 (3):139–50. doi:https://doi.org/10.1080/08827508.2011.623749.
- Cheng, C., Z. H. Dou, and T.-A. Zhang. 2020. Mechanism of melt separation in preparation of low-oxygen high titanium ferroalloy prepared by multistage and deep reduction. Metals 10 (3):309. doi:https://doi.org/10.3390/met10030309.
- Cheng, C., Z. H. Dou, T.-A. Zhang, Y. Liu, and L. P. Niu. 2019a. Distribution and control mechanism of Al and O residuals in ferrotitanium prepared by aluminothermic reduction with insufficient Al. JOM 71 (2):809–14. doi:https://doi.org/10.1007/s11837-018-3212-6.
- Cheng, C., Z. H. Dou, T.-A. Zhang, J. M. Su, H. J. Zhang, Y. Liu, and L. P. Niu. 2019c. Sulfur distribution in preparation of high titanium ferroalloy by thermite method with different CaO additions. Rare Metals 38:793–99. doi:https://doi.org/10.1007/s12598-018-1170-3.
- Cheng, C., Z. H. Dou, T.-A. Zhang, J. M. Su, H. J. Zhang, Y. Liu, and L. P. Niu. 2019d. Oxygen content of high ferrotitanium prepared by thermite method with different melt separation temperatures. Rare Metals 38 (9):892–98. doi:https://doi.org/10.1007/s12598-019-01218-1.
- Cheng, C., Z. H. Dou, T.-A. Zhang, H. J. Zhang, X. Yi, and J. M. Su. 2017. Synthesis of as-cast Ti-Al-V alloy from titanium-rich material by thermite reduction. JOM 69 (10):1818–1523. doi:https://doi.org/10.1007/s11837-017-2467-7.
- Cheng, C., T.-A. Zhang, and Z. H. Dou. 2019b. Formation mechanism and distribution of Al and O in the ferrotitanium with different Ti contents prepared by thermite method. JOM 71 (10):3584–89. doi:https://doi.org/10.1007/s11837-019-03597-3.
- Choi, K., H. Choi, and I. Sohn. 2017. Understanding the magnesiothermic reduction mechanism of TiO2 to produce Ti. Metallurgical and Materials Transactions B 48 (2):922–32. doi:https://doi.org/10.1007/s11663-016-0912-6.
- Cui, C. X., B. Hu, L. Zhao, and S. Liu. 2011. Titanium alloy production technology, market prospects and industry development. Materials & Design 32 (3):1684–91. doi:https://doi.org/10.1016/j.matdes.2010.09.011.
- Dehghan-Manshadi, A., M. Bermingham, M. Dargusch, D. StJohn, and M. Qian. 2017. Metal injection moulding of titanium and titanium alloys: Challenges and recent development. Powder Technology 319:289–301. doi:https://doi.org/10.1016/j.powtec.2017.06.053.
- Distl, B., G. Dehm, and F. Stein. 2020. Effect of oxygen on high-temperature phase equilibria in ternary Ti-Al-Nb alloys. Zeitschrift fur Anorganische und Allgemeine Chemie 646:1–7.
- Dolganov, A., M. Bishop, M. Tomatis, G. Chen, and D. Hu. 2020. Environmental assessment of the near-net-shape electrochemical metallisation process and the Kroll-electron beam melting process for titanium manufacture. Green Chemistry 22 (6):1952–67. doi:https://doi.org/10.1039/C9GC04036F.
- Dosaj, V., C. Aksaranan, and D. Morris. 1975. Thermodynamic properties of the calcium + calcium chloride system measured by an electrochemical technique. Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases 71:1083–98. doi:https://doi.org/10.1039/f19757101083.
- Dou, Z. H., T.-A. Zhang, Z. M. Zhang, C. Wang, Y. Liu, G. Z. Lv, J. C. He, and X. L. Jiang. 2014. A method of preparation of ferrotitanium alloy based on aluminothermic self-propagating injection depth reduction. China patent CN201410345901.4.
- Elias, C. N., J. Lima, R. Valiev, and M. Meyers. 2008. Biomedical applications of titanium and its alloys. JOM 60 (3):46–49. doi:https://doi.org/10.1007/s11837-008-0031-1.
- Fan, J. L., L. Liang, Z. Liu, Y. Li, Y. Li, H. Gao, S. Wu, Y. Wang, and X. Wang. 2019a. Recent research and development of mould materials for casting TiAl alloys. Materials Science and Technology 35 (8):891–99. doi:https://doi.org/10.1080/02670836.2019.1598667.
- Fan, S. G., Z. H. Dou, T.-A. Zhang, Y. Liu, and L. P. Niu. 2019b. Deoxidation mechanism in reduced titanium powder prepared by multistage deep reduction of TiO2. Metallurgical and Materials Transactions B 50 (1):282–90. doi:https://doi.org/10.1007/s11663-018-1466-6.
- Fan, S. G., Z. H. Dou, T.-A. Zhang, B. W. Zhang, and L. P. Niu. 2020. Direct preparation of titanium powder by multistage deep reduction. Rare Metal Materials and Engineering 49 (3):1020–23.
- Fang, Z. Z., J. D. Paramore, P. Sun, K. R. Chandran, Y. Zhang, Y. Xia, F. Cao, M. Koopman, and M. Free. 2018. Powder metallurgy of titanium–past, present, and future. International Materials Reviews 63 (7):407–59. doi:https://doi.org/10.1080/09506608.2017.1366003.
- Ferro, P. D., B. Mishra, D. Olson, and W. Averill. 1997. Application of ceramic membrane in molten salt electrolysis of CaO-CaCl2. Waste Management 17 (7):451–61. doi:https://doi.org/10.1016/S0956-053X(97)10051-4.
- Ferro, P. D., B. Mishra, D. Olson, and W. Averill. 1998. Electrolytic extraction of calcium from calcium oxide. Transactions of the Indian Institute of Metals 51:69–77.
- Fischbach, H. 1985. Thermodynamic data for liquid Ca-CaF2 and Ca-CaCl2 slags. Steel Research: Process Metallurgy 56 (7):365–68. doi:https://doi.org/10.1002/srin.198500649.
- Fraser, H. L., M. Imam, and Y. Kosaka. 2016. Electrolytic Ti powder production from ore source. 2015 world conference on titanium, 61. San Diego: John Wiley & Sons.
- Fray, D. J. 2008. Novel methods for the production of titanium. International Materials Reviews 53 (6):317–25. doi:https://doi.org/10.1179/174328008X324594.
- Fray, D. J., and G. Chen. 2004. Reduction of titanium and other metal oxides using electrode oxidation. Materials Science and Technology 20 (3):295–300. doi:https://doi.org/10.1179/026708304225012242.
- Gambogi, J. 2020. Mineral commodity summaries: Titanium statistics and information, M. George. U.S. Geological Survey. Reston: National Minerals Information Center.
- Gao, F., Z. Nie, D. Yang, B. Sun, Y. Liu, X. Gong, and Z. Wang. 2018. Environmental impacts analysis of titanium sponge production using Kroll process in China. Journal of Cleaner Production 174:771–79. doi:https://doi.org/10.1016/j.jclepro.2017.09.240.
- Ginatta, M. V. 2004. In Ti-2003 science and technology, ed. G. Lutjering and J. Albrecht, 237–44. Weinheim: Wiley-VCH.
- Ginatta, M. V., and G. Orsello. 1987. Plant for the electrolytic production of reactive metals in molten salt baths. US Patent US4670121 A.
- Gueguin, M., and F. Cardarelli. 2007. Chemistry and mineralogy of titania-rich slags. Part 1—Hemo-ilmenite, sulphate, and upgraded titania slags. Mineral Processing and Extractive Metallurgy Review 28 (1):1–58. doi:https://doi.org/10.1080/08827500600564242.
- Güthera, V., M. Allen, J. Klose, and H. Clemens. 2018. Metallurgical processing of titanium aluminides on industrial scale. Intermetallics 103:12–22. doi:https://doi.org/10.1016/j.intermet.2018.09.006.
- He, Z. Y., X. Li, L. P. Niu, and T.-A. Zhang. 2019. Simulation study on flow field of sponge titanium by product magnesium chloride in high temperature gas phase oxidation reactor. Titanium Industry Progress 36 (4):36–42.
- Hu, D., A. Dolganov, M. Ma, B. Bhattacharya, M. Bishop, and G. Chen. 2018. Development of the Fray-Farthing-Chen cambridge process: Towards the sustainable production of titanium and its alloys. JOM 70 (2):129–37. doi:https://doi.org/10.1007/s11837-017-2664-4.
- Hunter, M. A. 1910. Metallic titanium. Journal of the American Chemical Society 32 (3):330–36. doi:https://doi.org/10.1021/ja01921a006.
- Jiao, S. Q., and H. Zhu. 2006. Novel metallurgical process for titanium production. Journal of Materials Research 21 (9):2172–75. doi:https://doi.org/10.1557/jmr.2006.0268.
- Jiao, S. Q., and H. Zhu. 2007. Electrolysis of Ti2CO solid solution prepared by TiC and TiO2. Journal of Alloys and Compounds 438 (1–2):243–46. doi:https://doi.org/10.1016/j.jallcom.2006.08.016.
- Kalinnikov, V. T., and A. I. Nikolaev. 2002. Titanium-rare metal minerals of the Kola Peninsula–a source of both conventional and new materials. Mineral Processing and Extractive Metallurgy Review 22 (4–6):453–62. doi:https://doi.org/10.1080/08827500208547424.
- Kamali, A. R., H. Razavizadeh, and S. Hadavi. 2007. A new process for titanium aluminides production from TiO2. Journal of Materials Science & Technology 23 (3):367–72.
- Kim, S. W., J. Hong, Y. Na, J. Yeom, and S. Kim. 2014. Development of TiAl alloys with excellent mechanical properties and oxidation resistance. Materials & Design 54:814–19. doi:https://doi.org/10.1016/j.matdes.2013.08.083.
- Kim, Y. W., and S. Kim. 2018. Advances in gammalloy materials-processes-application technology: Successes, dilemmas, and future. JOM 70 (4):553–60. doi:https://doi.org/10.1007/s11837-018-2747-x.
- Kipouros, G. J., and R. Sharma. 1990. Electrolytic regeneration of the neodymium oxide reduction - spent salt. Journal of the Electrochemical Society 137 (11):3333–38. doi:https://doi.org/10.1149/1.2086218.
- Kobryn, P. A., and S. Semiatin. 2001. The laser additive manufacture of Ti-6Al-4V. JOM 53 (9):40–42. doi:https://doi.org/10.1007/s11837-001-0068-x.
- Kottman, M., S. Zhang, J. McGuffin-Cawley, P. Denney, and B. Narayanan. 2015. Laser hot wire process: A novel process for near-net shape fabrication for high-throughput applications. JOM 67 (3):622–28. doi:https://doi.org/10.1007/s11837-014-1288-1.
- Kroll, W. J. 1940. The production of ductile titanium. Journal of the Electrochemical Society 78 (1):35–47. doi:https://doi.org/10.1149/1.3071290.
- Li, J., X. Lu, S. Yang, L. Ma, E. Wu, J. Hou, C. Li, T. Wang, and B. Li. 2017b. Preparation of Ti-Al-xFe-ySi alloy from electro-titanium slag by electro-aluminothermic reduction. Non-ferrous Metals: Smelting Part 8:25–29.
- Li, J., X. Lu, S. Yang, E. Wu, J. Hou, C. Li, Q. Lai, and L. Ma. 2017a. Theoretical and experimental research on preparation of Ti-Al alloy by electric aluminothermic reduction. Iron Steel Vanadium Titanium 38 (5):46–52.
- Li, S. S., X. Zou, K. Zheng, X. Lu, Q. Xu, C. Chen, and Z. Zhou. 2017. Direct production of TiAl3 from Ti/Al-containing oxides precursors by solid oxide membrane (SOM) process. Journal of Alloys and Compounds 727:1243–52. doi:https://doi.org/10.1016/j.jallcom.2017.08.213.
- Lyu, C., L. Niu, Q. Zhao, and W. Wang. 2019. Influence of the granule morphology of MgO particles on the yield of pyrolysis products. Journal of Northeastern University: Natural Science 40 (11):1579–83.
- Ma, M., D. Wang, W. Wang, X. Hu, X. Jin, and G. Chen. 2006. Extraction of titanium from different titania precursors by the FFC Cambridge process. Journal of Alloys and Compounds 420 (1–2):37–45. doi:https://doi.org/10.1016/j.jallcom.2005.10.048.
- Ma, Q. 2010. Cold compaction and sintering of titanium and its alloys for near-net-shape or preform fabrication. International Journal of Powder Metallurgy 46 (5):29–44.
- Mcdonald, J. P., M. Rodriguez, E. Jones, and D. Adams. 2010. Rare-earth transition-metal intermetallic compounds produced via self-propagating, high-temperature synthesis. Journal of Materials Research 25 (4):718–27. doi:https://doi.org/10.1557/JMR.2010.0091.
- Merzhanov, A. G. 2004. The chemistry of self-propagating high-temperature synthesis. Journal of Materials Chemistry 14 (12):1779–86. doi:https://doi.org/10.1039/b401358c.
- Merzhanov, A. G., and I. Borovinskaya. 1972. Self-propagating high-temperature synthesis of inorganic compounds. Doklady Akademii Nauk Sssr 204 (2):366–69.
- Merzhanov, A. G., and I. Borovinskaya. 2008. Historical retrospective of SHS: An autoreview. International Journal of Self-propagating High-temperature Synthesis 17 (4):242–65. doi:https://doi.org/10.3103/S1061386208040079.
- Murr, L. E., S. Quinones, S. Gaytan, M. Lopez, A. Rodela, E. Martinez, D. Hernandez, F. Medina, and R. Wicker. 2009. Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials 2 (1):20–32. doi:https://doi.org/10.1016/j.jmbbm.2008.05.004.
- Nagesh, C. R., and C. Ramachandran. 2007. Electrochemical process of titanium extraction. Transactions of Nonferrous Metals Society of China 17 (2):429–33. doi:https://doi.org/10.1016/S1003-6326(07)60110-1.
- Natsui, S., T. Sudo, R. Shibuya, H. Nogami, T. Kikuchi, and R. Suzuki. 2020. Visualization of TiO2 reduction behavior in molten salt electrolysis. Metallurgical and Materials Transactions B 51 (1):11–15. doi:https://doi.org/10.1007/s11663-019-01733-7.
- Nersisyan, H. H., H. Won, C. Won, A. Jo, and J. Kim. 2014. Effective two-step method for producing Ti-6Al-4V alloy particles with various morphologies. Powder Technology 254:57–62. doi:https://doi.org/10.1016/j.powtec.2014.01.005.
- Nguyen, T. H., and M. S. Lee. 2019. A review on the recovery of titanium dioxide from ilmenite ores by direct leaching technologies. Mineral Processing and Extractive Metallurgy Review 40 (4):231–47. doi:https://doi.org/10.1080/08827508.2018.1502668.
- Niu, L. P., T.-A. Zhang, W. B. Wang, A. P. Zhou, and H. Huang. 2014. New Mg-Ti combination based on the pyrolysis of molten magnesium chloride. Rare Metal Materials and Engineering 43 (12):3138–42.
- Niu, L. P., T.-A. Zhang, A. P. Zhou, G. Z. Lv, and J. C. He. 2013. Preparation and characterization of magnesia powder by direct pyrolysis process of molten magnesium chloride. The Chinese Journal of Nonferrous Metals 23 (6):1732–38.
- Okabe, T. H., T. Oda, and Y. Mitsuda. 2004. Titanium powder production by preform reduction process (PRP). Journal of Alloys and Compounds 364 (1–2):156–63. doi:https://doi.org/10.1016/S0925-8388(03)00610-8.
- Ono, K., and R. O. Suzuki. 2002. A new concept for producing Ti sponge: Calciothermic reduction. JOM 54 (2):59–61. doi:https://doi.org/10.1007/BF02701078.
- Pal, U. B., D. Woolley, and G. Kenney. 2001. Emerging SOM technology for the green synthesis of metals from oxides. JOM 53 (10):32–35. doi:https://doi.org/10.1007/s11837-001-0053-4.
- Paul, J. D. H., U. Lorenz, M. Oehring, and F. Appel. 2013. Up-scaling the size of TiAl components made via ingot metallurgy. Intermetallics 32:318–28. doi:https://doi.org/10.1016/j.intermet.2012.08.006.
- Popov, B. N., M. Kimble, and R. White. 1991. Electrochemical behaviour of titanium (II) and titanium (III) compounds in molten lithium chloride/potassium chloride eutectic melts. Journal of Applied Electrochemistry 21:351–57. doi:https://doi.org/10.1007/BF01020221.
- Pourabdoli, M., S. Raygan, H. Abdizadeh, and K. Hanaei. 2007. A new process for the production of ferrotitanium from titania slag. Canadian Metallurgical Quarterly 46 (1):17–24. doi:https://doi.org/10.1179/cmq.2007.46.1.17.
- Reddy, M. L. P., and J. Saji. 2002. Solvent extraction of tetravalent titanium with organophosphorus extractants. Mineral Processing and Extractive Metallurgy Review 23 (3–4):199–227. doi:https://doi.org/10.1080/08827500306892.
- Schwandt, C. 2013. Understanding the electro-deoxidation of titanium dioxide to titanium metal via the FFC-Cambridge process. Mineral Processing and Extractive Metallurgy 122 (4):213–18. doi:https://doi.org/10.1179/0371955313Z.00000000071.
- Schwandt, C., and D. J. Fray. 2007. Preparation of titanium coatings on steel through electro reduction of plasma sprayed and screen printed titanium dioxide deposits. Ironmaking & Steelmaking 34 (3):225–30. doi:https://doi.org/10.1179/174328107X167968.
- Song, Y. L., Z. H. Dou, T.-A. Zhang, and Y. Liu. 2019. A novel continuous and controllable method for fabrication of as-cast TiAl alloy. Journal of Alloys and Compounds 789:266–75. doi:https://doi.org/10.1016/j.jallcom.2019.03.050.
- Song, Y. L., Z. H. Dou, T.-A. Zhang, Y. Liu, and L. P. Niu. 2020. Preparation of TiAl master alloy by metallothermic reduction. Rare Metal Materials and Engineering 49 (3):1015–19.
- Staffansson, L.-I., and D. Sichen. 1992. A thermodynamic study of the Ca-CaF2, Ca-CaCl2, Ca-CaBr2 and Ca-CaI2 systems. Scandinavian Journal of Metallurgy 21:165–71.
- Sundaram, C. V., A. K. Taneja, and C. H. Sridhar Rao. 1992. Technology trends in the extractive metallurgy of zirconium, titanium, tantalum and niobium. Mineral Processing and Extractive Metallurgy Review 10 (1):239–65. doi:https://doi.org/10.1080/08827509208914088.
- Suzuki, R. O. 2005. Calciothermic reduction of TiO2 and in situ electrolysis of CaO in the molten CaCl2. Journal of Physics and Chemistry of Solids 66 (2–4):461–65. doi:https://doi.org/10.1016/j.jpcs.2004.06.041.
- Suzuki, R. O. 2008. International round table on titanium production in molten salts, 20–26. Cologne, Germany.
- Suzuki, R. O., K. Teranuma, and K. Ono. 2003. Calciothermic reduction of titanium oxide and in-situ electrolysis in molten CaCl2. Metallurgical and Materials Transactions B 34B:287–95. doi:https://doi.org/10.1007/s11663-003-0074-1.
- Taylor, P. R., and S. A. Pirzada. 1993. Plasma technology in extractive and process metallurgy. Mineral Processing and Extractive Metallurgy Review 12 (2–4):257–69. doi:https://doi.org/10.1080/08827509508935260.
- Tetsui, T., R. Nagasaki, D. Nagasaki, and J. Nagasaki. 2005. Titanium aluminum intermetallic compound based alloy and method of fabricating a product from the alloy. US Patent EP1308529B1.
- Tripathy, S. K., Y. Ramamurthy, and C. R. Kumar. 2010. Modeling of high-tension roll separator for separation of titanium bearing minerals. Powder Technology 201 (2):181–86. doi:https://doi.org/10.1016/j.powtec.2010.04.005.
- Vuuren, D. S. V., S. Oosthuizen, and M. Heydenrych. 2011. Titanium production via metallothermic reduction of TiCl4 in molten salt: Problems and products. Journal of the South African Institute of Mining and Metallurgy 111:141–48.
- Wang, B., K. Liu, and J. Chen. 2011. Reaction mechanism of preparation of titanium by electro-deoxidation in molten salt. Transactions of Nonferrous Metals Society of China 21 (10):2327–31. doi:https://doi.org/10.1016/S1003-6326(11)61016-9.
- Wang, B., K. Liu, J. Chen, T. Gao, and J. He. 2012. Preparation of V-Ti-Fe master alloys by metallothermic reduction method. Transactions of Nonferrous Metals Society of China 22 (6):1507–12. doi:https://doi.org/10.1016/S1003-6326(11)61348-4.
- Wang, W. B., L. Niu, T. Zhang, G. Lv, and A. Zhou. 2014. Design and study on pyrolysis device for molten magnesium chloride. Journal of Materials and Metallurgy 13 (4):293–97.
- Wang, Z. Y., J. Zhang, Z. Liu, G. Wang, K. Jiao, K. Li, and T. Yang. 2019. Production of ferrotitanium alloy from titania slag based on aluminothermic reduction. Journal of Alloys and Compounds 810:151969. doi:https://doi.org/10.1016/j.jallcom.2019.151969.
- Weston, N. S., and M. Jackson. 2017. FAST-forge - a new cost-effective hybrid processing route for consolidating titanium powder into near net shape forged components. Journal of Materials Processing Technology 243:335–46. doi:https://doi.org/10.1016/j.jmatprotec.2016.12.013.
- Withers, J. C., and R. Loutfy. 2011. Thermal and electrochemical process for metal production. US Patent US7410562 B2.
- Witusiewicz, V. T., A. Bondar, U. Hecht, and T. Velikanova. 2009. The Al-B-Nb-Ti system: IV. Experimental study and thermodynamic re-evaluation of the binary Al-Nb and ternary Al-Nb-Ti systems. Journal of Alloys and Compounds 472 (1–2):133–61. doi:https://doi.org/10.1016/j.jallcom.2008.05.008.
- Wu, X. H. 2006. Review of alloy and process development of TiAl alloys. Intermetallics 14 (10–11):1114–22. doi:https://doi.org/10.1016/j.intermet.2005.10.019.
- Yamaguchi, M., T. Ogasawara, and H. Ichihashi. 2007b. In Proc. 11th world conf. on ‘Titanium’, ed. M. Ninomi et al., Vol. 1, 147–50. Kyoto, Japan.
- Yamaguchi, M., Y. Ono, S. Kosemura, W. Kagobayashi, and T. Tanenaka. 2007a. In Proc. 11th world conf. on ‘Titanium’, ed. M. Ninomi et al. Vol. 1, 143–46. Kyoto, Japan.
- Ye, X. S., X. Lu, C. Li, W. Ding, X. Zou, Y. Gao, and Q. Zhong. 2011. Preparation of Ti-Fe based hydrogen storage alloy by SOM method. International Journal of Hydrogen Energy 36 (7):4573–79. doi:https://doi.org/10.1016/j.ijhydene.2010.04.098.
- Zhang, L. L., S. Wang, S. Jiao, K. Huang, and H. Zhu. 2012. Electrochemical synthesis of titanium oxycarbide in a CaCl2 based molten salt. Electrochimica Acta 75 (30):357–59. doi:https://doi.org/10.1016/j.electacta.2012.05.013.
- Zhang, T.-A., Z. H. Dou, Y. Liu, G. Z. Lv, L. P. Niu, Q. Y. Zhao, and J. C. He. 2011. A magnesium and chlorine recycling method of preparation of titanium sponge. China patent CN 201110104639.
- Zhang, T.-A., Z. H. Dou, G. Z. Lv, Y. Liu, Q. Y. Zhao, Z. M. Zhang, and X. L. Jiang. 2013. Cleaner production method for preparing superfine powder through self-propagating metallurgy method. China patent CN201310380803.4.
- Zhang, T.-A., Z. H. Dou, Z. S. Yin, H. G. Tang, L. P. Niu, Y. Liu, G. Z. Lv, and J. C. He. 2010. Method for preparing high-titanium iron by step-by-step metal thermal reduction. China patent CN201010514572.3.
- Zhang, T.-A., Z. H. Dou, Z. M. Zhang, Y. Liu, G. Z. Lv, and J. C. He. 2014. A direct preparation method of titanium based on aluminothermic reduction injection depth reduction. China patent CN201410345905.2.
- Zhang, W. S., Z. W. Zhu, and C. Y. Cheng. 2011. A literature review of titanium metallurgical processes. Hydrometallurgy 108:177–88. doi:https://doi.org/10.1016/j.hydromet.2011.04.005.
- Zhang, Y. 2014. Recovery of titanium from titanium bearing blast furnace slag by sulphate melting. Canadian Metallurgical Quarterly 53 (4):440–43. doi:https://doi.org/10.1179/1879139514Y.0000000136.
- Zhang, Y., Z. Fang, Y. Xia, Z. Huang, H. Lefler, T. Zhang, P. Sun, M. Free, and J. Guo. 2016. A novel chemical pathway for energy efficient production of Ti metal from upgraded titanium slag. Chemical Engineering Journal 286:517–27. doi:https://doi.org/10.1016/j.cej.2015.10.090.
- Zhang, Y., Z. Fang, Y. Xia, P. Sun, B. Devener, M. Free, H. Lefler, and S. Zheng. 2017. Hydrogen assisted magnesiothermic reduction of TiO2. Chemical Engineering Journal 308:299–310. doi:https://doi.org/10.1016/j.cej.2016.09.066.
- Zhang, Y., W. Lu, P. Sun, Z. Fang, S. Qiao, Y. Zhang, and S. Zheng. 2020. Deoxygenation of Ti metal: A review of processes in literature. International Journal of Refractory Metals and Hard Materials 91:105270. doi:https://doi.org/10.1016/j.ijrmhm.2020.105270.
- Zhao, K., and N. X. Feng. 2017. A new two-stage aluminothermic reduction process for preparation of Ti/Ti-Al alloys. In Rare metal technology, eds. H. Kim, S. Alam, N. Neelameggham, H. Oosterhof, T. Ouchi, X. Guan, 167–75. Switzerland: Springer, Cham. doi:https://doi.org/10.1007/978-3-319-51085-9_17.
- Zhao, K., N. X. Feng, and Y. W. Wang. 2017b. Fabrication of Ti-Al intermetallics by a two-stage aluminothermic reduction process using Na2TiF6. Intermetallics 85:156–62. doi:https://doi.org/10.1016/j.intermet.2017.02.016.
- Zhao, K., Y. W. Wang, and N. X. Feng. 2017c. Cleaner production of Ti powder by a two-stage aluminothermic reduction process. JOM 69 (10):1795–800. doi:https://doi.org/10.1007/s11837-017-2337-3.
- Zhao, K., Y. W. Wang, J. P. Peng, Y. Di, X. Z. Deng, and N. X. Feng. 2017a. Electrochemical preparation of titanium and titanium–copper alloys with K2Ti6O13 in KF–KCl melts. Rare Metals 36 (6):1–6. doi:https://doi.org/10.1007/s12598-016-0708-5.
- Zhao, K., Y. W. Wang, J. P. Peng, Y. Di, K. R. Liu, and N. X. Feng. 2016. Formation of Ti or TiC nanopowder from TiO2 and carbon powders by electrolysis in molten NaCl-KCl. RSC Advance 6:8644–50. doi:https://doi.org/10.1039/C5RA23063B.
- Zhao, Z. G., X. Lu, W. Ding, and G. Zhou. 2005. A new technology using SOM to produce titanium sponge. Shanghai Metals 27 (2):40–43.
- Zhu, F. L., H. Yuan, Q. Yu, B. Yang, B. Xu, and Y. Dai. 2011. Behavior of titanium dioxide in alumina carbothermic reduction-chlorination process in vacuum. Transactions of Nonferrous Metals Society of China 21 (8):1855–59. doi:https://doi.org/10.1016/S1003-6326(11)60941-2.
- Zou, X. L., and X. Lu. 2010. Preparation of titanium alloy by direct reduction of Ti-bearing blast furnace slag. The Chinese Journal of Nonferrous Metals 20 (9):1829–35.
- Zou, X. L., X. Lu, C. Li, and Z. Zhou. 2010. A direct electrochemical route from oxides to Ti-Si intermetallics. Electrochimica Acta 55 (18):5173–79. doi:https://doi.org/10.1016/j.electacta.2010.04.032.
- Zuhair, A. M., and A. Umberto. 1989. Self-propagating exothermic reactions: The synthesis of high-temperature materials by combustion. Materials Science Reports 3 (7–8):277–365. doi:https://doi.org/10.1016/0920-2307(89)90001-7.