References
- Abazarpoor, A., and M. Halali. 2017. Investigation on the particle size and shape of iron ore pellet feed using ball mill and HPGR grinding methods. Physicochemical Problems of Mineral Processing 53:908–19.
- Abazarpoor, A., M. halali, R. Hejazi, and M. Saghaeian. 2018. HPGR effect on the particle size and shape of iron ore pellet feed using response surface methodology. Mineral Processing and Extractive Metallurgy 127:40–48. doi:https://doi.org/10.1080/03719553.2017.1284414.
- Abouzeid, A.-Z. M., and D. W. Fuerstenau. 2009. Grinding of mineral mixtures in high-pressure grinding rolls. International Journal of Mineral Processing 93:59–65. doi:https://doi.org/10.1016/j.minpro.2009.05.008.
- Amiri, S. H., and S. Zare. 2019. Influence of grinding and classification circuit on the performance of iron ore beneficiation – A plant scale study. Mineral Processing and Extractive Metallurgy Review 1–10. doi:https://doi.org/10.1080/08827508.2019.1702982.
- Athayde, M., and M. C. Bagatini. 2019. Iron ore concentrate particle size controlling through application of microwave at the HPGR feed. Mining, Metallurgy & Exploration 36:353–62. doi:https://doi.org/10.1007/s42461-018-0013-y.
- Aydoğan, N. A., L. Ergün, and H. Benzer. 2006. High pressure grinding rolls (HPGR) applications in the cement industry. Minerals Engineering 19:130–39. doi:https://doi.org/10.1016/j.mineng.2005.08.011.
- Bearman, R. A., C. A. Briggs, and T. Kojovic. 1997. The applications of rock mechanics parameters to the prediction of comminution behaviour. Minerals Engineering 10:255–64. doi:https://doi.org/10.1016/S0892-6875(97)00002-2.
- Benzer, H., N. A. Aydogan, and H. Dündar. 2011. Investigation of the breakage of hard and soft components under high compression: HPGR application. Minerals Engineering 24:303–07. doi:https://doi.org/10.1016/j.mineng.2010.09.012.
- Bond, F. C. 1961. Crushing and grinding calculations Brit. Chemical Engineering 6(8):543–8.
- Bourgeois, F. S., and G. A. Banini. 2002. A portable load cell for in-situ ore impact breakage testing. International Journal of Mineral Processing 65:31–54. doi:https://doi.org/10.1016/S0301-7516(01)00057-6.
- Camalan, M., and Ç. Hoşten. 2015. Ball-Mill grinding kinetics of cement clinker comminuted in the high-pressure Roll Mill. Mineral Processing and Extractive Metallurgy Review 36:310–16. doi:https://doi.org/10.1080/08827508.2015.1004402.
- Camalan, M., and M. A. R. Önal. 2016. Influence of high-pressure grinding rolls on physical properties and impact breakage behavior of coarsely sized cement clinker. Particulate Science and Technology 34:278–88. doi:https://doi.org/10.1080/02726351.2015.1075636.
- Csőke, B., Á. Rácz, and G. Mucsi. 2013. Determination of the Bond work index of binary mixtures by different methods. International Journal of Mineral Processing 123:78–86. doi:https://doi.org/10.1016/j.minpro.2013.05.004.
- Fuerstenau, D., A. Abouzeid, B. Velamakanni, and D. Deason 1986. Grinding of mixtures of minerals: Kinetics and energy distribution. Proceedings of First World Congress on Particle Technology, Part II, Comminution, Nuremberg, 415–26.
- Fuerstenau, D. W., A. Shukla, and P. C. Kapur. 1991. Energy consumption and product size distributions in choke-fed, high-compression roll mills. International Journal of Mineral Processing 32:59–79. doi:https://doi.org/10.1016/0301-7516(91)90019-F.
- Fuerstenau, D. W., A. Z. M. Abouzeid, and P. C. Kapur. 1992. Energy split and kinetics of ball mill grinding of mixture feeds in heterogeneous environment. Powder Technology 72:105–11. doi:https://doi.org/10.1016/0032-5910(92)88016-B.
- Fuerstenau, D. W., O. Gutsche, and P. C. Kapur. 1996. Confined particle bed comminution under compressive loads. International Journal of Mineral Processing 44:521–37. doi:https://doi.org/10.1016/0301-7516(95)00063-1.
- Genç, Ö., A. H. Benzer, and Ş. L. Ergün. 2014. Analysis of single particle impact breakage characteristics of raw and HPGR-crushed cement clinkers by drop weight testing. Powder Technology 259:37–45. doi:https://doi.org/10.1016/j.powtec.2014.03.031.
- Ghorbani, Y., A. N. Mainza, J. Petersen, M. Becker, J. P. Franzidis, and J. T. Kalala. 2013. Investigation of particles with high crack density produced by HPGR and its effect on the redistribution of the particle size fraction in heaps. Minerals Engineering 43-44:44–51. doi:https://doi.org/10.1016/j.mineng.2012.08.010.
- Ghorbani, Y., M. Becker, J. Petersen, S. H. Morar, A. Mainza, and J. P. Franzidis. 2011. Use of X-ray computed tomography to investigate crack distribution and mineral dissemination in sphalerite ore particles. Minerals Engineering 24:1249–57. doi:https://doi.org/10.1016/j.mineng.2011.04.008.
- Graça, L. M., L. E. Lagoeiro, R. M. F. Lima, P. F. Barbosa, and M. M. Machado. 2015. Effect of the morphological types in grinding of iron-ore products. Mineral Processing and Extractive Metallurgy Review 36:324–31. doi:https://doi.org/10.1080/08827508.2015.1004405.
- Hosten, C., and C. Avsar. 1998. Grindability of mixtures of cement clinker and trass. Cement and Concrete Research 28:1519–24. doi:https://doi.org/10.1016/S0008-8846(98)00145-8.
- Javad Koleini, S. M., K. Barani, and B. Rezaei. 2012. The effect of microwave treatment on dry grinding kinetics of iron ore. Mineral Processing and Extractive Metallurgy Review 33:159–69. doi:https://doi.org/10.1080/08827508.2011.562947.
- Kapur, P., G. Sudhir, and D. Fuerstenau 1992. Grinding of heterogeneous mixtures in a high-pressure roll mill. Comminution-Theory and Practice. Society for Mining, Metallurgy, and Exploration, Littleton, CO, 109–23.
- Kapur, P. C., and D. W. Fuerstenau. 1988. Energy split in multicomponent grinding. International Journal of Mineral Processing 24:125–42. doi:https://doi.org/10.1016/0301-7516(88)90036-1.
- Kazerani Nejad, R., and A. Sam. 2017. Limitation of HPGR application. Mineral Processing and Extractive Metallurgy 126:224–30. doi:https://doi.org/10.1080/03719553.2016.1233044.
- Kodali, P., N. Dhawan, T. Depci, C. L. Lin, and J. D. Miller. 2011. Particle damage and exposure analysis in HPGR crushing of selected copper ores for column leaching. Minerals Engineering 24:1478–87. doi:https://doi.org/10.1016/j.mineng.2011.07.010.
- Liu, L., Q. Tan, W. Li, and L. Lv. 2017. Comparison of grinding characteristics in high-pressure grinding roller (HPGR) and cone crusher (CC). Physicochemical Problems of Mineral Processing 53:1009–102.
- Liu, L. X., and M. Powell. 2016. New approach on confined particle bed breakage as applied to multicomponent ore. Minerals Engineering 85:80–91. doi:https://doi.org/10.1016/j.mineng.2015.10.016.
- Mcivor, R. E. 1997. High pressure grinding rolls - A review. In Comminution practices, ed. S. Kawatra, 95–7. Littleton, CO: Society of Mining Metallurgy and Exploration.
- Meyer, M., L. E. Lagoeiro, L. M. Graça, and C. J. Silva. 2016. Phase and microstructural characterization of iron ore pellet and their relation with cold crushing strength test. Mineral Processing and Extractive Metallurgy Review 37:295–304. doi:https://doi.org/10.1080/08827508.2016.1200574.
- Norgate, T. E., and K. R. Weller. 1994. Selection and operation of high pressure grinding rolls circuits for minimum energy consumption. Minerals Engineering 7:1253–67. doi:https://doi.org/10.1016/0892-6875(94)90116-3.
- Öner, M. 2000. A study of intergrinding and separate grinding of blast furnace slag cement. Cement and Concrete Research 30:473–80. doi:https://doi.org/10.1016/S0008-8846(00)00197-6.
- Orumwense, O. A., and E. Forssberg. 1992. Superfine and ultrafine grinding— A literature survey. Mineral Processing and Extractive Metallurgy Review 11:107–27. doi:https://doi.org/10.1080/08827509208914216.
- Ozcan, O., N. A. Aydogan, and H. Benzer. 2015. Effect of operational parameters and recycling load on the high pressure grinding rolls (HPGR) performance. International Journal of Mineral Processing 136:20–25. doi:https://doi.org/10.1016/j.minpro.2014.09.011.
- Peng, -H.-H., C.-K. Lin, and Y.-C. Chung. 2014. Effects of particle stiffness on mechanical response of granular solid under confined compression. Procedia Engineering 79:143–52. doi:https://doi.org/10.1016/j.proeng.2014.06.323.
- Pourghahramani, P., and E. Forssberg. 2005. Review of applied particle shape descriptors and produced particle shapes in grinding environments. Part I: Particle shape descriptors. Mineral Processing and Extractive Metallurgy Review 26:145–66. doi:https://doi.org/10.1080/08827500590912095.
- Pourghahramani, P., and E. Forssberg. 2007. The characterization of structural changes in hematite ground in a confined particle bed using Rietveld analysis. International Journal of Mineral Processing 83:47–59. doi:https://doi.org/10.1016/j.minpro.2007.04.004.
- Schönert, K. 1988. A first survey of grinding with high-compression roller mills. International Journal of Mineral Processing 22:401–12. doi:https://doi.org/10.1016/0301-7516(88)90075-0.
- Singh, V., P. Dixit, R. Venugopal, and K. B. Venkatesh. 2019. Ore pretreatment methods for grinding: Journey and prospects. Mineral Processing and Extractive Metallurgy Review 40:1–15. doi:https://doi.org/10.1080/08827508.2018.1479697.
- Standard, A. 2014. D 2938. Standard test method for unconfined compressive strength of intact rock. West Conshohocken, PA: ASTM Standard.
- Tavares, L. M. 2005. Particle weakening in high-pressure roll grinding. Minerals Engineering 18:651–57. doi:https://doi.org/10.1016/j.mineng.2004.10.012.
- Tavares, L. M. 2007. Breakage of single particles: quasi-static. Handbook of powder technology 12:3–68.
- Tavares, L. M., and R. D. C. Kallemback. 2013. Grindability of binary ore blends in ball mills. Minerals Engineering 41:115–20. doi:https://doi.org/10.1016/j.mineng.2012.11.001.
- Tavares, L. M., and R. P. King. 1998. Single-particle fracture under impact loading. International Journal of Mineral Processing 54:1–28. doi:https://doi.org/10.1016/S0301-7516(98)00005-2.
- Van der Meer, F. P., and A. Gruendken. 2010. Flowsheet considerations for optimal use of high pressure grinding rolls. Minerals Engineering 23:663–69. doi:https://doi.org/10.1016/j.mineng.2009.09.012.
- Von Michaelis, H. 2009. How energy efficient is HPGR? World Gold Conference. Cape Town, South African: Southern African Institute of Mining and Metallurgy (SAIMM) in conjunction with the Canadian Institute of Mining, Metallurgy and Petroleum (CIM), and the Australasian Institute of Mining and Metallurgy (AusIMM), Johannesburg, South Africa, 7–15.
- Zhang, Y., S.-L. Zheng, H. Du, H.-B. Xu, and Y. Zhang. 2010. Effect of mechanical activation on alkali leaching of chromite ore. Transactions of Nonferrous Metals Society of China 20:888–91. doi:https://doi.org/10.1016/S1003-6326(09)60231-4.
- Zhou, W.-T., Y.-X. Han, Y.-S. Sun, J.-L. Yang, and S.-J. MA. 2019. Multi-scale impact crushing characteristics of polymetallic sulphide ores. Transactions of Nonferrous Metals Society of China 29:1929–38. doi:https://doi.org/10.1016/S1003-6326(19)65100-9.