Review of Recent Advances in HPGR Designs

References

• Aminalroaya, A., and P. Pourghahramani. 2022a. The effect of feed characteristics on particles breakage and weakening behavior in high pressure grinding rolls (HPGR). Mineral Processing & Extractive Metallurgy Review 43 (5):610–21. doi:10.1080/08827508.2021.1913153.
   Web of Science ®Google Scholar
• Aminalroaya, A., and P. Pourghahramani. 2022b. Investigation of particles breakage and weakening behaviors in multi-component feed grinding by high pressure grinding rolls (HPGR). Mineral Processing & Extractive Metallurgy Review 43 (2):217–32. doi:10.1080/08827508.2021.1880400.
   Web of Science ®Google Scholar
• Aydoǧan, N. A., L. Ergün, and H. Benzer. 2006. High pressure grinding rolls (HPGR) applications in the cement industry. Minerals Engineering 19 (2):130–39. doi:10.1016/j.mineng.2005.08.011.
   Web of Science ®Google Scholar
• Banini, G. A., and J. Hollow, 2011. Evaluation of scale up effect on high pressure grinding roll (HPGR) implementation at Pt freeport Indonesia. In Proceeding 5th International Conference, Vancouver, Canada. Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology.
   Google Scholar
• Battersby, M. J. G., H. Kellerwessel, and G. Oberheuser. 1992. Important advances in the development of high pressure rolls comminution for the minerals industry. In Proceedings of the Extractive Metallurgy of Gold and Base Metals Conference, Kalgoorlie, 26–28.
   Google Scholar
• Benzer, H., L. Ergun, A. J. Lynch, M. Oner, A. Gunlu, I. B. Celik, and N. Aydogan. 2001. Modelling cement grinding circuits. Minerals Engineering 14 (11):1469–82. doi:10.1016/S0892-6875(01)00160-1.
   Web of Science ®Google Scholar
• Broeckmann, C., and A. Gardula, 2005. Developments in high-pressure grinding technology for base and precious metal minerals processing. In Proceedings of the 37th Annual Meeting Canadian Mineral Process, Ottawa, 285–300.
   Google Scholar
• Broeckmann, C., and A. Packeisen. 2004. Under pressure – HEXADUR®, a new wear resistant concept for high pressure grinding rolls, 55–58. World Cement.
   Google Scholar
• Buchholz, G., and A. G. Kloeckner Humbolt Deutz, 1992. Seal for ends of gap between milling rollers, Offenlegunsschrift, DE4037816A1.
   Google Scholar
• Burchardt, E., and T. Mackert, 2019. HPGRs in the minerals industry: What do more than 50 hard rock HPGRs tell us for the future? (Part 2 – 2019). In Proceeding 7th International Conference, Vancouver, Canada: Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology.
   Google Scholar
• Campos, T. M., G. Bueno, G. K. P. Barrios, and L. M. Tavares. 2019a. Pressing iron ore concentrate in a pilot-scale HPGR. Part 1: Experimental results. Minerals Engineering 140:105875. doi:10.1016/j.mineng.2019.105875.
   Web of Science ®Google Scholar
• Campos, T. M., G. Bueno, G. K. P. Barrios, and L. M. Tavares. 2019b. Pressing iron ore concentrate in a pilot-scale HPGR. Part 2: Modeling and simulation. Minerals Engineering 140:105876. doi:10.1016/j.mineng.2019.105876.
   Web of Science ®Google Scholar
• Campos, T. M., G. Bueno, and L. M. Tavares. 2021. Modeling comminution of iron ore concentrates in industrial-scale HPGR. Powder Technology 383:244–55. doi:10.1016/j.powtec.2020.12.075.
   Web of Science ®Google Scholar
• Campos, T. M., H. A. Petit, R. O. Freitas, and L. M. Tavares. 2023. Online prediction of pressing iron ore concentrates in an industrial HPGR. Part 1: Modeling approach. Minerals Engineering 201:108206. doi:10.1016/j.mineng.2023.108206.
   Web of Science ®Google Scholar
• Chen, K., and W. Yin. 2022. Differences in early rejection of gangue for low-grade iron ores with different textures from HPGR. Mineral Processing & Extractive Metallurgy Review 45 (4):1–7. doi:10.1080/08827508.2022.2155154.
   Google Scholar
• Cleary, P. W., and M. D. Sinnott. 2021. Axial pressure distribution, flow behaviour and breakage within a HPGR investigation using DEM. Minerals Engineering 163:106769. doi:10.1016/j.mineng.2020.106769.
   Web of Science ®Google Scholar
• Daniel, M., B. Klein, and C. Wang. 2019. High-pressure grinding roll technology. SME Mineral Processing and Extractive Metallurgy Handbook :443–464.
   Google Scholar
• Daniel, M. J., 2002. HPGR model verification and scale-up. M.Sc. thesis, Brisbane: University of Queensland.
   Google Scholar
• Daniel, M. J., and C. Morley. 2010. Can diamonds go all the way with HPGRs? Journal of the South African Institute of Mining and Metallurgy 1: 201–14.
   Google Scholar
• Daniel, M. J., and S. Morrell. 2004. HPGR model verification and scale-up. Minerals Engineering 17 (11–12):1149–61. doi:10.1016/j.mineng.2004.05.016.
   Web of Science ®Google Scholar
• Drüphake, P., B. Simonis, A. Hanemann, and H. Wilhelm, 2018. In Argo systems: The argo mill index. Proceeding 9th International Symposium Fine Grinding and Dispersing, Braunschweig.
   Google Scholar
• Dundar, H., H. Benzer, and N. Aydogan. 2013. Application of population balance model to HPGR crushing. Minerals Engineering 50-51:114–120. doi:10.1016/j.mineng.2013.07.005.
   Web of Science ®Google Scholar
• Dunne, R., D. Maxton, and S. Morrell. 2004. HPGR - The Australian experience. Plant Operations Forum 1:153–162.
   Google Scholar
• Farahmand, A., and G. Ehrentraut. 1997. Use of the roller press and the high-efficiency separator for the production of sorbent. Erzmetall 3:201–10.
   Google Scholar
• Gardula, A., D. Das, M. DiTrento, and S. Joubert. 2015. First year of operation of HPGR at Tropicana gold mine–case study. Cuprum: Czasopismo naukowo-techniczne górnictwa rud 2:15–36.
   Google Scholar
• Gerrard, M., B. Costello, and C. Morley. 2004. Operational experiences and performance assessment of HPGR technology at argyle diamond mine. Publications of the Australasian Institute of Mining and Metallurgy 1 63–73.
   Google Scholar
• Gruendken, A., J. Portocarrero, and F. Van der Meer, 2009. 10th anniversary of first installed HPGR replacing tertiary crusher. In Proceedings of the 41st Annual Canadian Mineral Processors Conference, Ottawa, 491–507.
   Google Scholar
• Hall, S., E. Hofmann, and C. Carpinisan, 2012. Improvements in HPGR and grinding mill technology. In Proceeding 44th Annual Canadian Mineral Processors Conference, Ottawa, Ontario, 463–70.
   Google Scholar
• Heinicke, F., 2010. The advantage of half scale to full scale HPGR modelling. In Proceedings of the 8th International Comminution Symposium, Cape Town.
   Google Scholar
• Heinicke, F., M. Pfeifer, and H. Lieberwirth, 2023. Physical relations of edge effect in HPGR. In Proceedings of the 8th International Comminution Symposium, Cape Town, 94–100.
   Google Scholar
• Herman, V., B. Knorr, and D. Whalen, 2013.HRCTM: Taking HPGR efficiency to the next level by reducing edge effect. In International Mineral Processing Conference, Santiago, 195–202.
   Google Scholar
• Herman, V. S., K. A. Harbold, M. A. Mular, and L. J. Biggs, 2015. Building the world’s largest HPGR – the HRC3000 at the Morenci Metcalf concentrator. Proceeding 6th International Conference, Vancouver, 1–17. Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology.
   Google Scholar
• Hofmann, E. J., J. E. Hofmann, and A. J. Hofmann-Fritz. 2013. Australian innovations in HPGR and large grinding mill manufacture. Metallurgical Plant Design Operating Strategy 1:15–17.
   Google Scholar
• Hofmann, J., C. Churchman, J. Ropa, and S. Ramos 2023. Improvement in asset efficiency through tyre wear life optimization at Cerro Verde. Proceeding 8th International Conference, Vancouver, 1–17. Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology.
   Google Scholar
• Jones, B. 2012. VFD control methodologies in High Pressure Grinding drive systems. In Proceedings of the IEEE Cement Industry Technical Conference, San Antonio, Texas, USA, 1–7.
   Google Scholar
• Kazerani, N. R., and A. Sam. 2017. The wear pattern in high pressure grinding rolls. Mineral Processing & Extractive Metallurgy 126 (4):238–44. doi:10.1080/03719553.2016.1263059.
   Google Scholar
• Kellerwessel, H. 1990. High pressure material bed comminution in practice. ZKG International 43:57–64.
   Google Scholar
• Klymowsky, I. B., and J. Liu, 1997. Towards the development of a work index for the roller press. (No. CONF-970211-), Society for Mining, Metallurgy and Exploration, Inc, Littleton, CO.
   Google Scholar
• Klymowsky, R., and T. C. Logan. 2005. High pressure grinding of gold ore. In Proceedings of the 37th Annual Meeting Canadian Mineral Processors, Ottawa, 325–34.
   Google Scholar
• Klymowsky, R., N. Petzelt, J. Knecht, and E. Burchardt. 2002. Selection and sizing of high pressure grinding rolls. In Mineral processing plant design practice and control Society For Mining, Metallurgy and Exploration, 636–68. Littleton: SME.
   Google Scholar
• Knapp, H., S. Hannot, and F. Van der Meer, 2019. HPGR: Why Skewing is a requirement for operational applications. In Proceeding 7th International Conference. Vancouver, Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology.
   Google Scholar
• Knorr, B., J. Bublitz, and N. Elkin 2023. Upgrading a 2.4-meter HPGR with advanced mechanical skew control and flanged roll design. In Proceeding 8th International Conference. Vancouver, Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology.
   Google Scholar
• Knorr, B., V. Herman, and D. Whalen. 2013. HRC™: Taking HPGR efficiency to the next level by reducing edge effect, Procemin 2013, 195–202. Santiago: Gecamin.
   Google Scholar
• Knorr, B., V. Herman, and D. Whalen. 2016. A closer look at increasing HPGR efficiency through reductions in edge effect. Minerals & Metallurgical Processing 33 (1):1–6. doi:10.19150/mmp.6461.
   Google Scholar
• Kodali, P., N. Dhawan, T. Depci, C. L. Lin, and J. D. Miller. 2011. Particle damage and exposure analysis in HPGR crushing of selected copper ores for column leaching. Minerals Engineering 24 (13):1478–87. doi:10.1016/j.mineng.2011.07.010.
   Web of Science ®Google Scholar
• Köppern. 2009. High-pressure grinding. Köppern Broch.
   Google Scholar
• Lane, G., M. Daniel, R. Dunne, S. Morrell, and D. Maxton. 2009. HPGR application in Australia - status and future directions. In Procemin 2009 , 180–89. Santiago: Gecamin.
   Google Scholar
• Li, H., W. Tong, J. Cui, H. Zhang, L. Chen, and L. Zuo. 2014. Heat treatment of centrifugally cast high-vanadium alloy steel for high-pressure grinding roller. Acta Metallurgica Sinica (English Letters) 27 (3):430–35. doi:10.1007/s40195-014-0075-x.
   Web of Science ®Google Scholar
• Lieberwirth, H. 2023. Implications of recent HPGR design developments for stress distribution in grinding gap and milling performance. In Proceeding 8th International Conference. Vancouver, Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology. 1–16.
   Google Scholar
• Lim, W. I. L., J. J. Campbell, and L. A. Tondo. 1997. The effect of rolls speed and rolls surface pattern on high pressure grinding rolls performance. Minerals Engineering 10 (4):401–19. doi:10.1016/S0892-6875(97)00017-4.
   Web of Science ®Google Scholar
• Lim, W. I. L., and K. R. Weller. 1999. Some benefits of using studded surfaces in high pressure grinding rolls. Minerals Engineering 12 (2):187–203. doi:10.1016/S0892-6875(98)00131-9.
   Web of Science ®Google Scholar
• Lubjuhn, U. 1992. Material transport und Druckverteilung im Spalt der Gutbett-Walzenmühle. VDI-Verlag.
   Google Scholar
• Lubjuhn, U., U. Sander, and K. Schonert. 1994. Druckprofil in der Kompresssionszone deGutbett-Walzenmühle. Zement-Kalk-Gips 27.
   Google Scholar
• Lubjuhn, U., and K. Schönert, 1993. Material flow in the acceleration zone and throughput of high pressure roller mills. In Proceeding XVIII International Mineral Process Congress, Sydney, 161–68.
   Google Scholar
• Mackert, T., F. Schroers, J. Dziedzina, P. Lackmann, and J. Remmers 2023. Experiences and operating results from applying rotating side plates to high-pressure grinding rolls in minerals applications. In Proceeding 8th International Conference. Vancouver, Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology, 1–23.
   Google Scholar
• Maxton, D., C. Morley, and R. Bearman. 2003. A quantification of the benefits of high pressure rolls crushing in an operating environment. Minerals Engineering 16 (9):827–38. doi:10.1016/S0892-6875(03)00179-1.
   Web of Science ®Google Scholar
• Mclvor, R. E. 1997. High pressure grinding rolls- a review. Comminution Practices, SME. Chapter 13, 95–98.
   Google Scholar
• Michaelis, H. V. O. N., 2009. How energy efficient is HPGR? Proceedings of the World Gold Conference, Johannesburg, 7–18.
   Google Scholar
• Morley, C. 2010. HPGR-FAQ the users who uses HPGR? Journal- South African Institute of Mining and Metallurgy 110:17–20.
   Google Scholar
• Morrell, S., W. Lim, F. Shi, and L. Tondo. 1997. Modelling of the HPGR crusher. Comminution Practices :117–126.
   Google Scholar
• Mular, M. A., J. R. Hoffert, and S. M. Koski, 2015. Design and operation of the Metcalf concentrator comminution circuit. In SAG 2015 Proceeding 6th Internatinal Conference, Vancouver, Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology, 1–23.
   Google Scholar
• Nagata, Y., Y. Tsunazawa, K. Tsukada, Y. Yaguchi, Y. Ebisu, K. Mitsuhashi, and C. Tokoro. 2020. Effect of the roll stud diameter on the capacity of a high-pressure grinding roll using the discrete element method. Minerals Engineering 154:106412. doi:10.1016/j.mineng.2020.106412.
   Web of Science ®Google Scholar
• Oberheuser, G. 1996. Wear protection of surfaces from high pressure grinding rolls: Possibilities and limits. International Journal of Mineral Processing 44-45:561–68. doi:10.1016/0301-7516(95)00065-8.
   Google Scholar
• Oliveira, R., H. Delboni, and M. Bergerman. 2016. Performance analysis of the HRC HPGR in pilot plant. Rem Revista Escola de Minas 69 (2):227–32. doi:10.1590/0370-44672015690124.
   Google Scholar
• Ozcan, O., N. A. Aydogan, and H. Benzer. 2015. Effect of operational parameters and recycling load on the high pressure grinding rolls (HPGR) performance. International Journal of Mineral Processing 136:20–25. doi:10.1016/j.minpro.2014.09.011.
   Google Scholar
• Ozcan, O., and H. Benzer. 2013. Comparison of different breakage mechanisms in terms of product particle size distribution and mineral liberation. Minerals Engineering 49:103–08. doi:10.1016/j.mineng.2013.05.006.
   Web of Science ®Google Scholar
• Pischtschan, M., S. Belz, and M. Perrucci. 2018. HPGR roller life extension with wear management system. In Proceedings of the International Mineral Processing Congress, Moscow, 2:1–12.
   Google Scholar
• Povey, B. C. 2013. Pushing the Use of High Pressure Grinding Rolls in Magnetite Circuits. In Proceedings of the Metallurgical Plant Design and Operating Strategies, Perth, Australia 1:15–17.
   Google Scholar
• Powell, M. S., M. M. Hilden, C. M. Evertsson, G. Asbjornsson, A. H. Benzer, A. N. Mainza, L. M. Tavares, B. Davis, N. Plint, and C. Rule, 2012. Optimization opportunities for high pressure grinding rolls circuits. In Proceeding AUSIMM Conference, Australia, 483–98.
   Google Scholar
• Quist, J., and M. Evertsson, 2012. Simulating pressure distribution in HPGR using the discrete element method. In Proceedings of the 10th International Comminution Symposium, Cape Town, 1–14.
   Google Scholar
• Rashidi, S., R. K. Rajamani, and D. W. Fuerstenau. 2017. A review of the modeling of high pressure grinding rolls. Kona Powder & Particle Journal 34:125–40. doi:10.14356/kona.2017017.
   Google Scholar
• Robichaud, F., H. Tbaybi, J. Boily, J. Power, M. Gaumont, T. Kojovic, A. Morasse, K. Keetmaa, and D. J. Reid, 2023. Implementation of high-pressure grinding rolls (HPGR) as the tertiary crusher at the Meadowbank process plant. In Proceeding 8th International Conference, Vancouver, semi-Autogenous Grinding and High-Pressure Grinding Roll Technology 1–25.
   Google Scholar
• Rodriguez, V. A., G. K. Barrios, T. M. Campos, and L. M. Tavares. 2024. Critical assessment of novel developments in HPGR technology using DEM. Materials 17 (7):1665. doi:10.3390/ma17071665.
   PubMed Web of Science ®Google Scholar
• Rodriguez, V. A., G. K. P. Barrios, G. Bueno, and L. M. Tavares. 2021. Investigation of lateral confinement, roller aspect ratio and wear condition on HPGR performance using DEM-MBD-PRM simulations. Minerals 11 (8):801–21. doi:10.3390/min11080801.
   Web of Science ®Google Scholar
• Rodriguez, V. A., G. K. P. Barrios, G. Bueno, and L. M. Tavares. 2022a. Coupled DEM-MBD-PRM simulations of high-pressure grinding rolls. Part 1: Calibration and validation in pilot-scale. Minerals Engineering 177:107389. doi:10.1016/j.mineng.2021.107389.
   Web of Science ®Google Scholar
• Rodriguez, V. A., G. K. P. Barrios, and L. M. Tavares. 2022b. Coupled DEM-MBD-PRM simulations of high-pressure grinding rolls. Part 2: Investigation of roll skewing. Minerals Engineering 178:107428. doi:10.1016/j.mineng.2022.107428.
   Web of Science ®Google Scholar
• Rodriguez, V. A., T. M. Campos, G. K. P. Barrios, G. Bueno, and L. M. Tavares. 2023. A hybrid PBM-DEM model of high-pressure grinding rolls applied to iron ore pellet feed pressing. Kona Powder & Particle Journal 40:262–76. doi:10.14356/kona.2023011.
   Google Scholar
• Rowe, W. B. 1983. Hydrostatic and hybrid bearing design. Butterworth-Heinemann.
   Google Scholar
• Saramak, D. 2012. Optimizing the performance of high-pressure grinding roll based ore enrichment circuits. Gospodarka Surowcami Mineral Resources Management 28:87–99.
   Web of Science ®Google Scholar
• Saramak, D., D. Foszcz, T. Gawenda, A. Konieczny, and W. Pawlos. 2016. Influence of type of lining in high-pressure grinding rolls on effectiveness of copper ore comminution. Physicochemical Problems of Mineral Processing 52:182–92.
   Web of Science ®Google Scholar
• Schönert, K. 1979. Energetische Aspekte Des Zerkleinerns Spröder Stoffe. Zement-Kalk-Gips 32:1–9.
   Google Scholar
• Schönert, K. 1985. Sizing of high-pressure twin-roller mills. Zement- Kalk-Gips, A 38:728–30.
   Google Scholar
• Schönert, K. 1988. A first survey of grinding with high-compression roller mills. International Journal of Mineral Processing 22 (1–4):401–12. doi:10.1016/0301-7516(88)90075-0.
   Web of Science ®Google Scholar
• Schönert, K., and U. Lubjuhn, 1990. Throughput of high compression roller mills with plane and corrugated rollers. In Proceeding 7th European Symposium Comminution, Ljubljana, 747–63.
   Google Scholar
• Senchenko, A. Y., and Y. V. Kulikov, 2016. Special aspects of circuits design with the use of HPGR technology based on pilot testing data and industrial operating experience. In 28th International Mineral Processing Congress, Quebec, 1–13.
   Google Scholar
• Solomon, N., M. Becker, A. Mainza, J. Petersen, and J. P. Franzidis. 2011. Understanding the influence of HPGR on PGM flotation behavior using mineralogy. Minerals Engineering 24 (12):1370–77. doi:10.1016/j.mineng.2011.07.015
   Web of Science ®Google Scholar
• Sönmez, B., R. Oliveira, A. Jankovic, W. Valery, and M. Us. 2015. Metso HRC™-Energy efficient comminution technology basic principles. In Proceedings of the XVI Balkan Mineral Processing Congress II:131–38. Belgrade, Serbia.
   Google Scholar
• Tavares, L. M. 2005. Particle weakening in high-pressure roll grinding, Miner. Eng 18:651–57.
   Google Scholar
• Theisen, W. 2001. A novel PM-wear protection method to meet high comminution demands. Wear 250–251:54–58.
   Web of Science ®Google Scholar
• Thompsen, L., N. Patzelt, and J. Knecht. 1996. High-pressure grinding for copper at Cyprus sierrita. Mining Engineering 48:23–26.
   Google Scholar
• Van der Ende, R., H. Knapp, and F. Van der Meer. 2019. Reducing edge effect and material bypass using spring-loaded cheek plates in HPGR grinding. In Proceeding 7th International Conference. Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology, Vancouver, 1–9.
   Google Scholar
• Van der Meer, F. 2010. High pressure grinding rolls scale-up and experiences. In XXV International Mineral Processing Congress, Brisbane, Vol. 2, 1319–31.
   Google Scholar
• Van der Meer, F. 2015. Pellet feed grinding by HPGR. Minerals Engineering 73:21–30. doi:10.1016/j.mineng.2014.12.018
   Web of Science ®Google Scholar
• Van der Meer, F. P. 1997. In Roller press grinding of pellet feed. Experiences of KHD in the iron ore industry. In Proceeding Conference Iron Ore Resources and Reserves Estimation. Perth, Australia, 1–15.
   Google Scholar
• Van der Meer, F. P. 2011. Feasibility of dry high pressure grinding and classification. In Proceeding 5th Internatinal Conference Semi-Autogenous Grinding and High-Pressure Grinding Roll Technology, Vancouver, 1–18.
   Google Scholar
• Van der Meer, F. P., and R. Dicke. 2008. High pressure grinding; How high can you go. In Proceeding Procemin 2008, Fifth International Minerals Processing Seminar, Santiago, 22–24.
   Google Scholar
• Van der Meer, F. P., and A. Gruendken. 2010. Flowsheet considerations for optimal use of high-pressure grinding rolls. Minerals Engineering 23:663–69.
   Web of Science ®Google Scholar
• Van der Meer, F. P., and W. Maphosa. 2012. High pressure grinding moving ahead in copper, iron, and gold processing. Journal- South African Institute of Mining and Metallurgy 112:637–47.
   Web of Science ®Google Scholar
• Van Rijswick, R., S. Onol, R. Oliveira, and B. Dierx. 2024. To flange or not to flange? Minerals Engineering 208:108476. doi:10.1016/j.mineng.2023.108476.
   Web of Science ®Google Scholar
• Weerasekara, N. S., M. S. Powell, P. W. Cleary, L. M. Tavares, M. Evertsson, R. D. Morrison, J. Quist, and R. M. Carvalho. 2013. The contribution of DEM to the science of comminution. Powder Technology 248:3–24. doi:10.1016/j.powtec.2013.05.032.
   Web of Science ®Google Scholar
• Wiistner, H., and D. Lecher. 1987. General statements on the state of roller press technology. In Symposium on interchange of know-how of roller press application , 30–47. Cologne: KHD Humboldt Wedag AG.
   Google Scholar
• Zou, Y., C. Zhang, D. Gou, G. Cheng, and R. Yang. 2023. DEM analysis of wear evolution and its effect on the operation of a lab-scale HPGR mill. Minerals Engineering 204:1084. doi:10.1016/j.mineng.2023.108401.
   Web of Science ®Google Scholar