Fracture Analysis for a Frictional Fastener Hole with Edge Cracks in an Anisotropic PlateFootnote∗

∗Communicated by C. A. Mota Soares

References

• W. G. Bickley The distribution of stress round a circular hole in a plate , Phil. Trans. Roy. Soc. London Ser. A , 227 383 – 415 ( 1928 ).
   Google Scholar
• R. C. Knight The action of a rivet in a plate of finite breadth , Phil. Magazine 19 517 – 540 ( 1935 ).
   Google Scholar
• V. Shivakumar and Y. C. Hsu Stress intensity factors for cracks emanating from the loaded fastener hole , in Fracture Mechanics and Technology ( G. C. Sih and C. L. Chow, eds ), Sijthoff and Noordhoff , The Netherlands , 1187 – 1200 , 1977 .
   Google Scholar
• D. P. Rooke and S. M. Hutchins Stress intensity factors for cracks at loaded holes-effect of load distribution , J. Strain Anal. 19 81 – 96 ( 1984 ).
   Web of Science ®Google Scholar
• J. P. Waszczak and T. A. Cruse Failure mode and strength predictions of anisotropic bolt bearing specimens , J. Compos. Mater. – 421 – 425 ( 1971 ).
   Web of Science ®Google Scholar
• D. J. Cartwright and G. A. Ratcliffe Strain energy release rate for radial cracks emanating from a pin loaded hole , Int. J. Fract. 8 175 – 181 ( 1972 ).
   Web of Science ®Google Scholar
• D. L. Ball The development of mode I, linear-elastic stress intensity factor solutions for cracks in mechanically fastened joints , Eng. Fract. Mech. 27 653 – 681 ( 1987 ).
   Web of Science ®Google Scholar
• A. F. Grandt , Jr. Stress intensity factors for some through-cracked fastener holes , Int. J. Fract. 11 283 – 294 ( 1975 ).
   Web of Science ®Google Scholar
• A. F. Grandt , Jr. Stress intensity factors for cracked holes and rings loaded with polynomial crack face pressure distributions , Int. J. Fract. 14 R221–R229 ( 1978 ).
   Web of Science ®Google Scholar
• A. F. Grandt , Jr., and T. E. Kullgren Tabulated stress intensity factor solutions for flawed fastener holes , Eng. Fract. Mech. 18 435 – 451 ( 1983 ).
   Web of Science ®Google Scholar
• J. Tweed and D. P. Rooke The stress intensity factor for a crack at the edge of a loaded hole , Int. J. Solids Struct. I5 899 – 906 ( 1979 ).
   Google Scholar
• D. P. Rooke and J. Tweed Stress intensity factors for a crack at the edge of a pressurized hole , Int. J. Eng. Sci. 18 109 – 121 ( 1980 ).
   Web of Science ®Google Scholar
• D. P. Rooke Compounded stress intensity factors for cracks at fastener holes , Eng. Fract. Mech. 19 359 – 374 ( 1984 ).
   Web of Science ®Google Scholar
• M. Kamel and B. M. Liaw Boundary element analysis of cracks at a fastener hole in an anisotropic sheet , Int. J. Fract. 50 263 – 280 ( 1991 ).
   Web of Science ®Google Scholar
• B. M. Liaw and M. Kamel Stress intensity factors for cracks emanating from a curvilinear hole in an anisotropic plane under arbitrary loadings , Eng. Fract. Mech. 36 669 – 681 ( 1990 ).
   Web of Science ®Google Scholar
• P. K. Banerjee and R. Butterfield Boundary Element Method in Engineering Science , McGraw-Hill , New York , 1981 .
   Google Scholar
• G. N. Savin Stress Concentration Around Holes , Pergamon Press , New York , 1961 .
   Google Scholar
• G. C. Sih and H. Liebowitz Mathematical theories of brittle fracture , Fracture An Advanced Treatise , Vol. II ( H. Liebowitz, ed. ), Academic Press , New York , 1968 .
   Google Scholar
• ∗Communicated by C. A. Mota Soares
   Google Scholar