References
- A. E. Zohir, M. A. Habib, and M. A. Nemitallah, Heat Transfer Characteristics in a Double-Pipe Heat Exchanger Equipped with Coiled Circular Wires, Exp. Heat Transf., vol. 28, pp. 531–545, 2015.
- H. Tuo and P. Hrnjak, New Approach to Improve Performance by Venting Periodic Reverse Vapor Flow in Microchannel Evaporator, Int. J. Refrig., vol. 36, pp. 2187–2195, 2013.
- G. Arslan and N. Eskin, Heat Transfer Characteristics for Condensation of R134a in a Vertical Smooth Tube, Exp. Heat Transf., vol. 28, pp. 430–445, 2015.
- C. C. Zhang, D. B. Wang, Y. J. Zhu, Y. Han, J. X. Wu, and X. Peng, Numerical Study on Heat Transfer and Flow Characteristics of a Tube Fitted with Double Spiral Spring, Int. J. Thermal Sci., vol. 94, pp. 18–27, 2015.
- M. Ghobadi and Y. S. Muzychka, Heat Transfer and Pressure Drop in a Spiral Square Channel, Exp. Heat Transf., vol. 28, pp. 546–563, 2015.
- T. S. Khan, M. S. Khan, M. C. Chyu, and Z. H. Ayub, Experimental Investigation of Single Phase Convective Heat Transfer Coefficient in a Corrugated Plate Heat Exchanger for Multiple Plate Configurations, Appl. Thermal Eng., vol. 30, pp. 1058–1065, 2010.
- K. Nilpueng and S. Wongwises, Experimental Study of Single-Phase Heat Transfer and Pressure Drop Inside a Plate Heat Exchanger with a Rough Surface, Exp. Thermal Fluid Sci., vol. 68, pp. 268–275, 2015.
- I. Gherasim, M. Taws, N. Galanis, and C. T. Nguyen, Heat Transfer and Fluid Flow in a Plate Heat Exchanger Part I. Experimental Investigation, Int. J. Thermal Sci., vol. 50, pp. 1492–1498, 2011.
- S. D. Pandey and V. K. Nema, An Experimental Investigation of Exergy Loss Reduction in Corrugated Plate Heat Exchanger, Energy, vol. 36, pp. 2997–3001, 2011.
- X. H. Han, L. Q. Cui, S. J. Chen, G. M. Chen, and Q. Wang, A Numerical and Experimental Study of Chevron, Corrugated-Plate Heat Exchangers, Int. Commun. Heat Mass Transf., vol. 37, pp. 1008–1014, 2010.
- F. B. Liu and Y. C. Tsai, An Experimental and Numerical Investigation of Fluid Flow in a Cross-Corrugated Channel, Heat Mass Transf., vol. 46, pp. 585–593, 2010.
- J. M. Lee, P. W. Kwan, C. M. Son, and M. Y. Ha, Characterizations of Aerothermal Performance of Novel Cross-Corrugated Plate Heat Exchangers for Advanced Cycle Aero-Engines, Int. J. Heat Mass Transf., vol. 85, pp. 166–180, 2015.
- X. S. Zhang, M. Shahidehpour, A. Alabdulwahab, and A. Abusorrah, Optimal Expansion Planning of Energy Hub with Multiple Energy Infrastructures, IEEE Trans. Smart Grid, vol. 6, pp. 2302–2310, 2015.
- K. Sarraf, S. Launay, and L. Tadrist, Complex 3D-Flow Analysis and Corrugation Angle Effect in Plate Heat Exchangers, Int. J. Thermal Sci., vol. 94, pp. 126–138, 2015.
- Y. C. Tsai, F. B. Liu, and P. T. Shen, Investigations of the Pressure Drop and Flow Distribution in a Chevron-Type Plate Heat Exchanger, Int. Commun. Heat Mass Transf., vol. 36, pp. 574–578, 2009.
- A. Lozano, F. Barreras, N. Fueyo, and S. Santodomingo, The Flow in an Oil/Water Plate Heat Exchanger for the Automotive Industry, Appl. Thermal Eng., vol. 28, pp. 1109–1117, 2008.
- V. Yakhot and S. A. Orszag, Renormalization Group Analysis of Turbulence: I. Basic Theory, J. Sci. Comput., vol. 1, pp. 3–51, 1986.
- W. T. Tao, The Numerical Simulation of Turbulent Flow and Heat Transfer, ch. 9, pp. 333–412. Numerical Heat Transfer, 2nd ed., Xi'an Jiaotong University Press, Xi'an, China, 2001.
- W. Rodi, Turbulence Models and Their Application in Hydraulics, ch. 2, Turbulence Modelling, pp. 5–44. 2nd ed., Netherlands, Iahr, 1984.
- A. Cooper, Recover More Heat with Plate Heat Exchanger, Chem. Eng., vol. 5, pp. 280–285, 1984.
- R. J. Moffat, Describing the Uncertainties in Experimental Results, Exp. Thermal Fluid Sci., vol. 1, pp. 3–17, 1988.
- N. Naili, M. Hazami, S. Kooli, and A. Farhat, Energy and Exergy Analysis of Horizontal Ground Heat Exchanger for Hot Climatic Condition of Northern Tunisia, Geothermics, vol. 53, pp. 270–280, 2015.
- L. Q. Huang, G. Q. Chen, Y. Zhang, B. Chen, and S. J. Luan, Exergy as a Unified Measure of Water Quality, Commun. Nonlinear Sci., vol. 12, pp. 663–672, 2007.
- M. A. Khairul, M. A. Alim, I. M. Mahbubul, R. Saidur, A. Hepbasli, and A. Hossain, Heat Transfer Performance and Exergy Analyses of a corrugated Plate Heat Exchanger Using Metal Oxide Nanofluids, Int. Commun. Heat Mass Transf., vol. 50, pp. 8–14, 2014.
- Z. Y. Guo, X. B. Liu, W. Q. Tao, and R. K. Shah, Effectiveness–Thermal Resistance Method for Heat Exchanger Design and Analysis, Int. J. Heat Mass Transf., vol. 53, pp. 2877–2884, 2010.
- Z. Y. Guo, H. Y. Zhu, and X. G. Liang, Entransy—A Physical Quantity Describing Heat Transfer Ability, Int. J. Heat Mass Transf., vol. 50, pp. 2545–2556, 2007.
- S. J. Xia, L. G. Chen, and F. R. Sun, Optimization for Entransy Dissipation Minimization in Heat Exchanger, Chinese Sci. Bull., vol. 54, pp. 3587–3595, 2009.
- Y. L. He and W. Q. Tao, Numerical Studies on the Inherent Interrelationship Between Field Synergy Principle and Entransy Dissipation Extreme Principle for Enhancing Convective Heat Transfer, Int. J. Heat Mass Transf., vol. 74, pp. 196–205, 2014.
- L. G. Chen, H. J. Feng, Z. H. Xie, and F. R. Sun, Thermal Efficiency Maximization for H- and X-Shaped Heat Exchangers Based on Constructal Theory, Appl. Thermal Eng., vol. 91, pp. 456–462, 2015.
- X. Cheng, Q. Zhang, and X. Liang, Analyses of entransy Dissipation, Entropy Generation and Entransy–Dissipation-Based Thermal Resistance on Heat Exchanger Optimization, Appl. Thermal Eng., vol. 38, pp. 31–39, 2012.
- H. Y. Zhu, The Minimum Thermal Resistance Principle Based on Entransy Disspation, ch. 5, The Minimum Thermal Resistance Principle, pp. 69–90, Tsinghua University, Beijing, China, 2007.
- L. G. Chen, Progress in Entransy Theory and Its Applications, Chinese Sci. Bull., vol. 57, pp. 4404–4426, 2012.
- H. J. Feng, L. G. Chen, Z. H. Xie, and F. R. Sun, Constructal Entransy Dissipation Rate Minimization for Triangular Heat Trees at Micro and Nanoscales, Int. J. Heat Mass Transf., vol. 84, pp. 848–855, 2015.