References
- S. Eiams-ard and P. Promvonge, Review of Ranque–Hilsch Effects in Vortex Tube, Renewable Sustainable Energy Rev., vol. 12, pp. 1822–1842, 2008.
- Y. T. Wu, Y. Ding, Y. B. Ji, C. F. Ma, and M. C. Ge, Modification and Experimental Research on Vortex Tube, Int. J. Refrig., vol. 20, pp. 1042–1049, 2007.
- G. J. Ranque, Experimental on Expansion in a Vortex With Simultaneous Exhaust of Hot Air and Cold Air, J. Phys. Radium, vol. 4, pp. 112–114, 1933.
- G. J. Ranque, Method and Apparatus for Obtaining From a Fluid Under Pressure Two Outputs of Fluid at Different Temperature. U.S. Patent 1952281 A, 1934.
- R. Hilsch, The Use of Expansion of Gases in a Centrifugal Field as a Cooling Process, Rev. Sci. Instrum., vol. 18, pp. 108–113, 1947.
- S. Eiams-ard, K. Wongcharee, and P. Promvonge, Experimental Investigation on Energy Separation in a Counter-Flow Ranque–Hilsch Vortex Tube: Effect of Cooling a Hot Tube, Int. Commun. Heat Mass Transfer, vol. 37, pp. 156–162, 2010.
- O. Aydın and M. Baki, An Experimental Study on the Design Parameters of a Counter-Flow Vortex Tube, Energy J., vol. 31, no. 14, pp. 2763–2772, 2006.
- M. O. Hamdan, B. Alsayyed, and E. Elnajjar, Nozzle Parameters Affecting Vortex Tube Energy Separation Performance, Heat Mass Transfer, vol. 49, pp. 533–541, 2013.
- M. Avci, The Effect of Nozzle Aspect Ratio and Nozzle Number on the Performance of the Ranque–Hilsch Vortex Tube, Appl. Therm. Eng., vol. 50, pp. 302–308, 2013.
- W. Frohlingsdorf and H. Unger, Numerical Investigation of the Compressible Flow and Energy Separation in Ranque–Hilsch Vortex Tube, Int. J. Heat Mass Transfer, vol. 42, pp. 415–422, 1999.
- U. Behera, P. J. Paul, K. Dinesh, and S. Jacob, Numerical Investigation on Flow and Temperature Separation in Ranque–Hilsch Vortex Tube, Int. J. Heat Mass Transfer, vol. 51, pp. 25–26. 6077–6089, 2008.
- R. Shamsoddini and A. H. Nezhad, Numerical Analysis of the Effects of Nozzle Number on the Flow and Power of Cooling of a Vortex Tube, Int. J. Refrig., vol. 33, pp. 774–782, 2010.
- S. Eiamsa-ard and P. Promvong, Numerical Simulation of Flow Field and Temperature Separation in a Vortex Tube, Int. Commun. Heat Mass Transfer, vol. 35, pp. 937–947, 2008.
- T. Farouk and B. Farouk, Large Eddy Simulation of the Flow Field and Temperature Separation in the Ranque–Hilsch Vortex Tube, Int. J. Heat Mass Transfer, vol. 50, pp. 4724–4735, 2007.
- T. Farouk, B. Farouk, and A. Gutsol, Simulation of Gas Species and Temperature Separation in the Counter-Flow Ranque–Hilsch Vortex Tube Using Large Eddy Simulation Technique, Int. J. Heat Mass Transfer, vol. 52, pp. 3320–3333, 2009.
- K. Dincer, S. Tasdemir, S. Baskaya, and B. Z. Uysal, Modeling of the Effects of Length to Diameter Ratio and Nozzle Number on the Performance of the Counter-Flow Ranque–Hilsch Vortex Tubes Using Artificial Neural Network, Appl. Therm. Eng., vol. 28, pp. 2380–2390, 2008.
- M. Bovand, M. S. Valipour, K. Dincer, and A. Tamayol, Numerical Analysis of the Curvature Effects on Ranque–Hilsch Vortex Tube Refrigerators, Appl. Therm. Eng., vol. 65, pp. 176–183, 2014.
- C. M. Bovand, M. S. Valipour, K. Dincer, and S. Eiamsa-ard, Application of Response Surface Methodology to Optimization of a Standard Ranque–Hilsch Vortex Tube Refrigerator, Appl. Therm. Eng., vol. 67, pp. 545–553, 2014.
- M. Bovand, M. S. Valipour, S. Eiamsa-ard, and A. Tamayol, Numerical analysis for curved vortex tube optimization, Int. Commun. Heat Mass Transfer, vol. 50, pp. 98–107, 2014.
- M. H. Saidi and M. S. Valipour, Experimental Modeling of Vortex Tube Refrigeration, Appl. Therm. Eng., vol. 23, pp. 1971–1980, 2003.
- A. M. Pinar, O. Uluer, and V. V. Kırmacı, Statistical Assessment of Counter-Flow Vortex Tube Performance for Different Nozzle Number, Cold Mass Fraction, and Inlet Pressure via Taguchi Method, Exp. Heat Transfer, vol. 22, pp. 271–282, 2009.
- K. Dincer, S. Baskaya, B. Z. Uysal, and I. Ucgul, Experimental Investigation of the Performance of a Ranque–Hilsch Vortex Tube with Regard to a Plug Located at the Hot Tube, Int. J. Refrig., vol. 32, pp. 87–94, 2009.
- M. S. Valipour and N. Niazi, Experimental Modeling of Curved Ranque–Hilsch Vortex Tube Refrigeration, Int. J. Refrig., vol. 34, pp. 1109–1116, 2011.
- Y. Xue and M. Arjomandi, The Effect of Vortex Angle on the Efficiency of the Ranque–Hilsch Vortex Tube, Exp. Therm. Fluid Sci., vol. 33, pp. 54–57, 2008.
- V. Kirmaci, Exergy Analysis and Performance of a Counter Flow Ranque–Hilsch Vortex Tube Having Various Nozzle Numbers at Different Inlet Pressure of Oxygen and Air, Int. J. Refrig., vol. 32, pp. 1626–1633, 2009.
- M. O. Hamdan, A. Alawar, E. Elnajjar, and W. Siddique, Experimental Analysis on Vortex Tube Energy Separation Performance, Heat Mass Transfer, vol. 47, pp. 1637–1642, 2011.
- P. K. Singh, R. G. Thgir, G. Dasaoju, and G. S. Grewel, An Experimental Performance Evaluation of Vortex Tube, IE (I) J-MC, vol. 84, pp. 149–153, 2004.
- C. M. Gao, K. J. Bosschaart, J. C. H. Zeegers, and A. T. A. M. Waele, Experimental Study on a Simple Ranque–Hilsch Vortex Tube, Cryogenics, vol. 45, pp. 173–183, 2005.
- A. Nouri-Borujerdi, M. Bovand, S. Rashidi, and K. Dincer, Geometric Parameters and Response Surface Methodology on Cooling Performance of Vortex Tubes, Int. J. Sustainable Energy, doi:10.1080/14786451.2015.1127233.
- M. Attalla, M. Salem, and A. A. EL-Wafa, An experimental investigation of the optimum geometry for energy separation of the Ranque–Hilsch vortex tube, Int. J. Mech. Mech. Eng., vol. 14, pp. 31–37, 2014.
- M. Attalla and M. Salem, Experimental Investigation of Heat Transfer for a Jet Impinging Obliquely on a Flat Surface, Exp. Heat Transfer, vol. 28, pp. 378–391, 2015.
- S. E. Rafiee, S. Ayenehpour, and M. M. Sadeghiazad, A Study on the Optimization of the angle of Curvature for a Ranque–Hilsch Vortex Tube, Using Both Experimental and Full Reynolds Stress Turbulence Numerical Modeling, Heat Mass Transfer, vol. 52, no. 2, pp. 337–350, 2016.
- K. Stephan, S. Lin, M. Durst, F. Seher, and D. Huang, An Investigation of Energy Separation in a Vortex Tube, Int. J. Heat Mass Transfer, vol. 26, pp. 341–348, 1993.
- S. Mohammadi and F. Farhdi, Experimental Analysis of a Ranque–Hilsch Vortex Tube for Optimizing Nozzle Numbers and Diameter, Appl. Therm. Eng., vol. 61, pp. 500–506, 2013.
- O. Aydin, B. Markal, and M. Avci, A New Geometry for a Counter-Flow Ranque–Hilsch Vortex Tube, Appl. Therm. Eng., vol. 30, pp. 2505–2511, 2010.