References
- R. Bogaert and A. Böles, Global Performance of a Prototype Brazed Plate Heat Exchanger in a Large Reynolds Number Range, Exp. Heat Transf., vol. 8, no. 4, pp. 293–311, 1995.
- M. A. Mehrabian, R. Poulter, and G. L. Quarini, Hydrodynamic and Thermal Characteristics of Corrugated Channels: Experimental Approach, Exp. Heat Transf., vol. 13, pp. 223–234, 2000.
- T. S. Khan, M. S. Khan, M.-C. Chyu, and Z. H. Ayub, Experimental Investigation of Single Phase Convective Heat Transfer Coefficient in a Corrugated Plate Heat Exchanger for Multiple Plate Configurations, Appl. Therm. Eng., vol. 30, pp. 1058–1065, 2010.
- M. Khoshvaght-Aliabadi, F. Hormozi, and A. Zamzamian, Role of Channel Shape on Performance of Plate-Fin Heat Exchangers: Experimental Assessment, Int. J. Therm. Sci., vol. 79, pp. 183–193, 2014.
- J. Fernández-Seara, R. Diz, and F. J. Uhía, Pressure Drop and Heat Transfer Characteristics of a Titanium Brazed Plate-fin Heat Exchanger with Offset Strip Fins, Appl. Therm. Eng., vol. 51, pp. 502–511, 2013.
- A. L. London, Offset Rectangular Plate-Fin Surfaces—Heat Transfer and Flow Friction Characteristics, J. Eng. Gas Turbines Power, vol. 90, p. 218, 1968.
- A. R. Wieting, Empirical Correlations for Heat Transfer and Flow Friction Characteristics of Rectangular Offset-fin Plate-Fin Heat Exchangers, J. Heat Transfer, vol. 97, pp. 488–490, 1975.
- R. Brinkmann, S. Ramadhyani, and F. P. Incropera, Enhancement of Convective Heat Transfer From Small Heat Sources To Liquid Coolants Using Strip Fins, Exp. Heat Transf., vol. 1, pp. 315–330, 1987.
- H. M. Joshi and R. L. Webb, Heat Transfer and Friction in the Offset Stripfin Heat Exchanger, Int. J. Heat Mass Transf., vol. 30, pp. 69–84, 1987.
- R. M. Manglik and A. E. Bergles, Heat Transfer and Pressure Drop Correlations for the Rectangular Offset Strip Fin Compact Heat Exchanger, Exp. Therm. Fluid Sci., vol. 10, pp. 171–180, 1995.
- Y. S. Muzychka and M. M. Yovanovich, Modeling the f and j Characteristics of the Offset Strip Fin Array, Enhanc. Heat Transf., vol. 8, pp. 261–277, 2001.
- L. Sheik Ismail, R. Velraj, and C. Ranganayakulu, Studies on Pumping Power in Terms of Pressure Drop and Heat Transfer Characteristics of Compact Plate-fin Heat Exchangers-A Review, Renew. Sustain. Energy Rev., vol. 14, pp. 478–485, 2010.
- H. Peng, X. Ling, and J. Li, Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers, Energy Convers. Manage., vol. 80, pp. 287–297, 2014.
- R. Chennu, Steady State and Transient Analysis of Compact Plate-fin Heat Exchanger Fins for Generation of Design Data using CFD, Int. J. Numer. Methods Heat Fluid Flow, vol. 26, pp. 440–460, 2016.
- Y. Yang, Y. Li, B. Si, J. Zheng, and R. Kang, Analysis of the Fin Performance of Offset Strip Fins Used in Plate-fin Heat Exchangers, J. Heat Transfer, vol. 138, p. 101801, 2016.
- C. Zhang, D. Wang, Y. Han, Y. Zhu, and X. Peng, Experimental and Numerical Investigation on the Exergy and Entransy Performance of a Novel Plate Heat Exchanger, Exp. Heat Transf., vol. 30, pp. 162–177, 2017.
- S. Hu and K. E. Herold, Prandtl Number Effect on Offset Fin Heat Exchanger Performance: Predictive Model for Heat Transfer and Pressure Drop, Int. J. Heat Mass Transf., vol. 38, pp. 1043–1051, 1995.
- N. Zhao, J. Yang, S. Li, and Q. Wang, Numerical Investigation of Laminar Thermal-hydraulic Performance of Al2O3–Water Nanofluids in Offset Strip Fins Channel, Int. Commun. Heat Mass Transf., vol. 75, pp. 42–51, 2016.
- M. Khoshvaght-Aliabadi, F. Hormozi, and A. Zamzamian, Experimental Analysis of Thermal-Hydraulic Performance of Copper-Water Nanofluid Flow in Different Plate-fin Channels, Exp. Therm. Fluid Sci., vol. 52, pp. 248–258, 2014.
- Y. S. Muzychka and M. M. Yovanovich, Modeling the f and j Characteristics for Transverse Flow Through an Offset Strip Fin at Low Reynolds Number, J. Enhanc. Heat Transf., vol. 8, pp. 243–259, 2001.
- L. Guo, J. Chen, F. Qin, Z. Chen, and W. Zhang, Empirical Correlations for Lubricant Side Heat Transfer and Friction Characteristics of the HPD Type Steel Offset Strip Fins, Int. Commun. Heat Mass Transf., vol. 35, pp. 251–262, 2008.
- L. Guo, F. Qin, J. Chen, and Z. Chen, Lubricant Side Thermal-Hydraulic Characteristics of Steel Offset Strip Fins with Different Flow Angles, Appl. Therm. Eng., vol. 28, pp. 907–914, 2008.
- H. Peng and X. Ling, Analysis of Heat Transfer and Flow Characteristics over Serrated Fins with Different Flow Directions, Energy Convers. Manag., vol. 52, pp. 826–835, 2011.
- J. Li, H. Peng and X. Ling, Numerical Study and Experimental Verification of Transverse Direction Type Serrated Fins and Field Synergy Principle Analysis, Appl. Therm. Eng., vol. 54, pp. 328–335, 2013.
- J. Fernández-Seara, F. J. Uhía, J. Sieres, and A. Campo, A General Review of the Wilson Plot Method and its Modifications to Determine Convection Coefficients in Heat Exchange Devices, Appl. Therm. Eng., vol. 27, pp. 2745–2757, 2007.
- H. H. Ku, Notes on the Use of Propagation of Error Formulas, J. Res. Natl. Bur. Stand. (1934), vol. 70C, pp. 263–273, 1966.
- M. A. Mueller, G. R. Schade, S. A. Hooks, R. L. Beck, G. F. Clyde, T. W. Dekleva, and D. Int-hout, ASHARE Standard Engineering Analysis of Experimental Data, 2004. Available at http://www.ce.utexas.edu/prof/Novoselac/classes/CE397/Handouts/ASHRAE_guideline_2.pdf
- R. Tatara and G. Lupia, Assessing Heat Exchanger Performance Data Using Temperature Measurement Uncertainty, Int. J. Eng. Sci. Technol., vol. 3, pp. 1–12, 2011.
- F. P. Incropera, D. P. DeWitt, T. L. Bergman, and A. Lavine, Fundamentals of Heat and Mass Transfer, p. 997, John Wiley, New York, 2002.
- H. P. Gavin, The Levenberg-Marquardt Method for Nonlinear Least Squares Curve-fitting Problems, Dep. Civ. Environ. Eng. Duke Univ., pp. 1–17, 2013. Course CE281. Available at http://people.duke.edu/~hpgavin/ce281/lm.pdf
- P. T. Boggs, R. H. Byrd, and R. B. Schnabel, A Stable and Efficient Algorithm for Nonlinear Orthogonal Distance Regression, SIAM J. Sci. Stat. Comput., vol. 8, pp. 1052–1078, 1987.