Experimental investigation of subcooled flow boiling of a 50/50 ethylene glycol/water mixture in finned rectangular aluminum channels

References

• S. Narumanchi, V. Hassani, and D. Bharathan, Modeling single-phase and boiling liquid jet impingement cooling in power electronics, Technical Report, NREL/TP-540-38787, National Renewable Energy Laboratory, Golden, CO, 2005.
   Google Scholar
• S. Narumanchi, V. Hassani, D. Bharathan, and A. Troshko, Numerical simulations of boiling jet impingement cooling in power electronics, Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, San Diego, CA, 2006.
   Google Scholar
• S. Narumanchi, A. Troshko, D. Bharathan, and V. Hassani, “Numerical simulations of nucleate boiling in impinging jets: applications in power electronics cooling,” Int. J. Heat Mass Transf., vol. 51, pp. 1–12, 2008. DOI: 10.1016/j.ijheatmasstransfer.2007.05.026.
   Web of Science ®Google Scholar
• M. J. Rau and S. V. Garimella, “Local two-phase heat transfer from arrays of confined and submerged impinging jets,” Int. J. Heat Mass Transf., vol. 67, pp. 487–498, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.08.041.
   Web of Science ®Google Scholar
• L. J. Turek, D. P. Rini, B. A. Saarloos, and L. C. Chow, Evaporative spray cooling of power electronics using high temperature coolant, Proceeding of Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM 2008), Orlando, FL, pp.346–351, 2008.
   Google Scholar
• I. Mudawar, D. Bharathan, K. Kelly, and S. Narumanchi, “Two-phase spray cooling of hybrid vehicle electronics,” IEEE Tran. Comp. Packag. Technol., vol. 32, pp. 501–512, 2009. DOI: 10.1109/TCAPT.2008.2006907.
   Web of Science ®Google Scholar
• H. Bostanci, D. Van Ee, B. A. Saarloos, D. P. Rini, and L. C. Chow, Spray cooling of power electronics using high temperature coolant and enhanced surface, Vehicle Power and Propulsion Conference (IEEE 2009), Dearborn, MI, pp.609–613, 2009.
   Google Scholar
• J. B. Campbell, A Two-Phase Cooling Method Using R134a Refrigerant to Cool Power Electronics Devices, Master’s thesis, University of Tennessee-Knoxville, Knoxville, TN, 2004.
   Google Scholar
• G. Moreno, S. Narumanchi, and C. King, “Pool boiling heat transfer characteristics of HFO-1234yf on plain and microporous-enhanced surfaces,” ASME J. Heat Transf., vol. 135, pp. 111014, 2013. DOI: 10.1115/1.4024622.
   Web of Science ®Google Scholar
• P. Wang, P. McCluskey, and A. Bar-Cohen, “Two-phase liquid cooling for thermal management of IGBT power electronic module,” ASME J. Electron. Packag., vol. 135, pp. 021001, 2013. DOI: 10.1115/1.4023215.
   Web of Science ®Google Scholar
• W. Yu, W. Zhao, D. M. France, and D. Singh, Coolant boiling for thermal control of hybrid electric vehicle power electronics, SAE 2014 Thermal Management Systems Symposium, Denver, CO, 2014.
   Google Scholar
• W. Zhao, D. M. France, W. Yu, and D. Singh, “Subcooled boiling heat transfer for cooling of power electronics in hybrid electric vehicles,” ASME J. Electron. Packag., vol. 137, pp. 031013, 2015. DOI: 10.1115/1.4030896.
   Web of Science ®Google Scholar
• W. Zhao, W. Yu, D. M. France, D. Singh, and R. K. Smith, Subcooled boiling heat transfer for thermal control of power electronics in hybrid electric vehicles, SAE 2015 Thermal Management Systems Symposium, Troy, MI, 2015.
   Google Scholar
• W. Yu, D. M. France, W. Zhao, D. Singh, and R. K. Smith, “Subcooled flow boiling heat transfer to water and ethylene glycol/water mixtures in a bottom-heated tube,” Exp. Heat Tran., vol. 29, pp. 593–614, 2016. DOI: 10.1080/08916152.2015.1046018.
   Web of Science ®Google Scholar
• B. G. Suhas and A. Sathyabhama, “Heat transfer and force balance approaches in bubble dynamic study during subcooled flow boiling of water-ethanol mixture,” Exp. Heat Tran., vol. 31, pp. 1–21, 2018. DOI: 10.1080/08916152.2017.1328469.
   Web of Science ®Google Scholar
• M. M. Sarafraz and F. Hormozi, “Comparatively experimental study on the boiling thermal performance of metal oxide and multi-walled carbon nanotube nanofluids,” Powder Technol., vol. 287, pp. 412–430, 2016. DOI: 10.1016/j.powtec.2015.10.022.
   Web of Science ®Google Scholar
• M. M. Sarafraz and F. Hormozi, “Scale formation and subcooled flow boiling heat transfer of CuO-water nanofluid inside the vertical annulus,” Exp. Thermal Fluid Sci., vol. 52, pp. 205–214, 2014. DOI: 10.1016/j.expthermflusci.2013.09.012.
   Web of Science ®Google Scholar
• P. Spiesman, Effects of Surface Characteristics on Flow Boiling Heat Transfer, Master’s Theses, Rochester Institute of Technology, Rochester, New York, 1998.
   Google Scholar
• V. Umesh, S. Bala Vignesh, and B. Raja, “A study on nucleate boiling heat transfer characteristics of acetone on smooth and indented surfaces,” Exp. Heat Tran., vol. 29, pp. 414–425, 2016. DOI: 10.1080/08916152.2015.1012570.
   Web of Science ®Google Scholar
• H. Setoodeh, A. Keshavarz, A. Ghasemian, and A. Nasouhi, “Experimental investigation of subcooled flow boiling in an inclined channel with a hot spot,” Exp. Heat Tran., vol. 29, pp. 741–758, 2016. DOI: 10.1080/08916152.2015.1113214.
   Web of Science ®Google Scholar
• F. P. Incropera and D. P. DeWitt, Fundamentals of Heat and Mass Transfer, 5th ed. New York: John Wiley & Sons Inc, 2002.
   Google Scholar
• R. J. Moffat, “Describing the uncertainties in experimental results,” Exp. Thermal Fluid Sci., vol. 1, pp. 3–17, 1988. DOI: 10.1016/0894-1777(88)90043-X.
   Web of Science ®Google Scholar