Experimental and numerical study of swirling subcooled flow boiling of water in a vertical annulus

References

• J. G. Collier and J. R. Thome, Convective Boiling and Condensation, 3rd ed. Oxford: Oxford Science Publications, 1994.
   Google Scholar
• M. M. Sarafraz, F. Hormozi, S. M. Peyghambarzadeh, and N. Vaeli, “Upward flow boiling to DI-water and Cuo nanofluids inside the concentric annuli,” J. Appl. Fluid Mech., vol. 8, no. 4, pp. 651–659, 2015. DOI: 10.18869/acadpub.jafm.73.238.19404.
   Web of Science ®Google Scholar
• M. M. Sarafraz and F. Hormozi, “Scale formation and subcooled flow boiling heat transfer of CuO–water nanofluid inside the vertical annulus,” Exp. Therm. Fluid Sci., vol. 52, pp. 205–214, 2014. DOI: 10.1016/j.expthermflusci.2013.09.012.
   Web of Science ®Google Scholar
• M. M. Sarafraz and F. Hormozi, “Comparatively experimental study on the boiling thermal performance of metal oxide and multi-walled carbon nanotube nanofluids,” Powder Technol., vol. 287, pp. 412–430, Jan. 2016. DOI: 10.1016/j.powtec.2015.10.022.
   Web of Science ®Google Scholar
• A. N. Varava et al., “Study of pressure drop and heat transfer in a swirl flow with one-sided heating in a range of heat flowrates below boiling crisis,” Therm. Eng., vol. 56, no. 11, pp. 953–962, 2009. DOI: 10.1134/S004060150911010X.
   Google Scholar
• W. R. Gambill, R. D. Bundy, and R. W. Wansbrough, “Heat transfer, burnout, and pressure drop for water in swirl flow subjected to large transverse temperature gradients,” J. Heat Transfer., vol. 90, pp. 87–98, 1968.
   Google Scholar
• M. A. Akhavan-Behabadi, R. Kumar, and M. Jamali, “Investigation on heat transfer and pressure drop during swirl flow boiling of R-134a in horizontal tube,” Int. J. Heat Mass Transfer., vol. 52, no. 5, pp. 1918–1927, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.09.034.
   Google Scholar
• F. T. Kanizawa, T. S. Mogaji, and G. Ribatski, “Evaluation of the heat transfer enhancement and pressure drop penalty during flow boiling inside tubes containing twisting tape insert,” Appl. Therm. Eng., vol. 70, no. 1, pp. 328–340, 2014. DOI: 10.1016/j.applthermaleng.2014.05.029.
   Web of Science ®Google Scholar
• P. Liu, X. B. Peng, Y. T. Song, and X. Mao, “Subcooled water flow boiling heat transfer in screw cooling tubes under one-sided heated conditions,” Appl. Therm. Eng., vol. 113, pp. 621–631, 2017. DOI: 10.1016/j.applthermaleng.2016.11.012.
   Web of Science ®Google Scholar
• M. Ishii and K. Mishima, “Two-fluid model and hydrodynamic constitutive relations,” Nucl. Eng. Des., vol. 82, pp. 107–126, 1984. DOI: 10.1016/0029-5493(84)90207-3.
   Web of Science ®Google Scholar
• D. Lucas, T. Frankb, C. Lifante, P. Zwart, and A. Burns, “Extension of the inhomogeneous MUSIG model for bubble condensation,” Nucl. Eng. Des., vol. 241, no. 11, pp. 4359–4367, Nov. 2011. DOI: 10.1016/j.nucengdes.2010.10.039.
   Web of Science ®Google Scholar
• E. Krepper, B. Končar, and Y. Egorov, “CFD modelling of subcooled boiling—concept, validation and application to fuel assembly design,” Nucl. Eng. Des., vol. 237, pp. 716–731, Apr. 2007. DOI: 10.1016/j.nucengdes.2006.10.023.
   Web of Science ®Google Scholar
• R. Zhang, T. Cong, W. Tian, S. Qiu, and G. Su, “Effects of turbulence models on forced convection subcooled boiling in vertical pipe,” Ann. Nucl. Energy., vol. 80, pp. 293–302, June. 2015. DOI: 10.1016/j.anucene.2015.01.039.
   Web of Science ®Google Scholar
• K. Mishima and M. Ishii, Critical Heat Flux Experiments under Low-Flow Conditions in a Vertical Annulus. NUREG/CR-2647, ANL-82-6, Argonne National Lab, Illinois, 1982.
   Google Scholar
• J. W. Park, W. P. Baek, and S. H. Chang, “Critical heat flux and flow pattern for water flow in annular geometry,” Nucl. Eng. Des., vol. 172, no. 1, pp. 137–155, Jul. 1997. DOI: 10.1016/S0029-5493(97)00032-0.
   Web of Science ®Google Scholar
• F. A. B. Filho, G. B. Ribeiro, and A. D. Caldeira, “Prediction of subcooled flow boiling characteristics using two-fluid Eulerian CFD model,” Nucl. Eng. Des., vol. 308, pp. 30–37, Nov. 2016. DOI: 10.1016/j.nucengdes.2016.08.016.
   Web of Science ®Google Scholar
• M. Ishii and N. Zuber, “Drag coefficient and relative velocity in bubbly, droplet or particulate flows,” AIChE J., vol. 25, no. 5, pp. 843–855, Sep. 1979. DOI: 10.1002/aic.690250513.
   Web of Science ®Google Scholar
• A. Tomiyama, “Struggle with computational bubble dynamics,” Multiphase Science and Technology, vol. 10, no. 4, pp. 369–405, 1998. DOI: 10.1615/MultScienTechn.v10.i4.40.
   Google Scholar
• S. P. Antal, R. T. Lahey, and J. E. Flaherty, “Analysis of phase distribution in fully developed laminar bubbly two-phase flow,” Int. J. Multiph. Flow., vol. 17, no. 5, pp. 635–652, Sep. 1991. DOI: 10.1016/0301-9322(91)90029-3.
   Web of Science ®Google Scholar
• A. D. Burns, T. Frank, I. Hamill, and J. Shi, “The favre averaged drag model for turbulent dispersion in eulerian multiphase flow,” Proceedings of the Fifth International Multiphase Flow, Yokohama, Japan, 2004.
   Google Scholar
• N. Zuber, “On the dispersed two-phase flow in the laminar flow regime,” Chem. Eng. Sci., vol. 19, no. 11, pp. 897–917, Nov. 1964. DOI: 10.1016/0009-2509(64)85067-3.
   Web of Science ®Google Scholar
• N. Kurul and M. Z. Podowski, “On the modeling of multidimensional effects in boiling channels,” ANS Proc. 27th National Heat Transfer Conference, Minneapolis, 1991.
   Google Scholar
• Y. M. F. Egorov, Experimental Implementation of the RPI Wall Boiling Model in CFX-5.6. Technical Report ANSYS/TR-04-10. Darmstadt: ANSYS Germany GmbH, 2004.
   Google Scholar
• V. H. Del Valle and D. B. R. Kenning, “Subcooled flow boiling at high heat flux,” Int. J. Heat Mass Tran., vol. 28, no. 10, pp. 1907–1920, Oct. 1985. DOI: 10.1016/0017-9310(85)90213-3.
   Web of Science ®Google Scholar
• M. C. Lemmert and J. M. Chawla, Influence of Flow Velocity on Surface Boiling Heat Transfer Coefficient, Heat Transfer and Boiling, E. Hahne and U. Grigull, Eds. Academic Press, New York, 1977.
   Google Scholar
• V. I. Tolubinski and D. M. Kostanchuk, “Vapour bubbles growth rate and heat transfer intensity at subcooled water boiling,” 4th International Heat Transfer Conference, Paris, France, 1970.
   Google Scholar
• Y. Sato, M. Sadatomi, and K. Sekoguchi, “Momentum and heat transfer in two-phase bubble flow—I. Theory,” Int. J. Multiphas Flow., vol. 7, no. 2, pp. 167–177, Apr. 1981. DOI: 10.1016/0301-9322(81)90003-3.
   Web of Science ®Google Scholar