Experimental investigation of the thermal performance of closed loop flat plate oscillating heat pipe

References

• D. J. Kearney, O. Suleman, J. Griffin, and G. Mavrakis “Thermal performance of a PCB embedded pulsating heat pipe for power electronics applications‘” Appl. Therm. Eng., vol. 98, pp. 798–809, April. 5. 2016. DOI: 10.1016/j.applthermaleng.2015.11.123.
   Web of Science ®Google Scholar
• C. Dang, L. Jia, and Q. Lu “Investigation on thermal design of a rack with the pulsating heat pipe for cooling CPUs‘” Appl. Therm. Eng., vol. 110, pp. 390–398, January. 5. 2017. DOI: 10.1016/j.applthermaleng.2016.08.187.
   Web of Science ®Google Scholar
• I. Mudawar “Recent advances in high-flux, two-phase thermal management‘” J. Therm. Sci. Eng. Appl., vol. 5, pp. 021012, May. 17. 2013. DOI: 10.1115/1.4023599.
   Web of Science ®Google Scholar
• J. B. Marcinichen, J. A. Olivier, N. Lamaison, and J. R. Thome “Advances in electronics cooling‘” Heat Transfer Eng., vol. 34, pp. 434–446, Nov. 20. 2013. DOI: 10.1080/01457632.2012.721316.
   Web of Science ®Google Scholar
• D. S. Naruka, R. Dwivedi, and P. K. Singh, “Experimental inquisition of heat pipe: performance evaluation for different fluids,” Exp. Heat Transfer, pp. 1–15, 2020. DOI: 10.1080/08916152.2020.1713254.
   Web of Science ®Google Scholar
• S. Caliskan, A. Dogan, and I. Kotcioglu. “Experimental investigation of heat transfer from different pin fin in a rectangular channel,” Exp. Heat Transfer, vol. 32, pp. 376–392, July. 04. 2019. DOI: 10.1080/08916152.2018.1526228.
   Web of Science ®Google Scholar
• M. A. Alnakeeb, W. M. El-Maghlany, M. A. Teamah, and M. M. Sorour, “Experimental study of mixed convection from horizontal ‎isothermal elliptic cylinders at different aspect ratios,” Exp. Heat Transfer, pp. 1–16, 2019. DOI: 10.1080/08916152.2019.1625468.
   Web of Science ®Google Scholar
• X. Peng, D. Wang, G. Wang, Y. Yang, and S. Xiang, “Investigation of heat transfer performance and flow characteristic in helically coiled-twisted flat tube,” Exp. Heat Transfer, pp. 1–21, 2019. DOI: 10.1080/08916152.2019.1656300.
   Web of Science ®Google Scholar
• C. K. Mangrulkar, et al., “Thermal performance escalation of cross flow heat exchanger using in-line elliptical tubes,” Exp. Heat Transfer, pp. 1–26, 2019. DOI: 10.1080/08916152.2019.1704946.
   Web of Science ®Google Scholar
• J. A. Olivier, J. B. Marcinichen, A. Bruch, and J. Thome “Green cooling of high performance microprocessors: parametric study between flow boiling and water cooling‘” J. Therm. Sci. Eng. Appl., vol. 3, pp. 041003, Oct. 24. 2011. DOI: 10.1115/1.4004435.
   Google Scholar
• B. Agostini, et al. “State of the art of high heat flux cooling technologies‘” Heat Transfer Eng., vol. 28, pp. 258–281, March. 6. 2007. DOI: 10.1080/01457630601117799.
   Web of Science ®Google Scholar
• H. Yang, S. Khandekar, and M. Groll, “Performance characteristics of pulsating heat pipes as integral thermal spreaders,” Int. J. Therm. Sci., vol. 48, pp. 815–824, 2009.
   Web of Science ®Google Scholar
• S. Khandekar, M. Groll, P. Charoensawan, S. Rittidech, and P. Terdtoon, “Closed and open loop pulsating heat pipes,” Proceedings of 13th International Heat Pipe Conference, Shanghai,China, 2004.
   Google Scholar
• M. Groll and S. Khandekar, “Pulsating heat pipes: progress and prospects,” Proceedings of the International Conference on Energy and the Environment, China, 2003.
   Google Scholar
• S. Khandekar, N. Dollinger, and M. Groll, “Understanding operational regimes of closed loop pulsating heat pipes: an experimental study,” Appl. Therm. Eng., vol. 23, pp. 707–719, 2003.
   Web of Science ®Google Scholar
• H. Akachi, “Structure of a heat pipe,” USA Patent 4921041 A, 1990.
   Google Scholar
• X. Han, X. Wang, H. Zheng, X. Xu, and G. Chen, “Review of the development of pulsating heat pipe for heat dissipation,” Renewable Sustainable Energy Rev., vol. 59, pp. 692–709, June. 2016. DOI: 10.1016/j.rser.2015.12.350.
   Web of Science ®Google Scholar
• K. K. Mehta, N. Mehta, and V. Patel, “Effect of operational parameters on the thermal performance of flat plate oscillating heat pipe,” J. Heat Transfer, vol. 141, pp. 121802, 2019. DOI:10.1115/1.4044825.
   Web of Science ®Google Scholar
• V. Patel, et al., “Experimental Investigation of Flat Plate Cryogenic Oscillating Heat Pipe,” J. Low Temp. Phys., vol. 198, pp. 41–55, 2019.
   Web of Science ®Google Scholar
• X. Liu and Y. Chen, “Fluid flow and heat transfer in flat-plate oscillating heat pipe,” Energy Build., vol. 75, pp. 29–42, June. 2014. DOI: 10.1016/j.enbuild.2014.01.041.
   Web of Science ®Google Scholar
• Y. Zhang and A. Faghri “Advances and unsolved issues in pulsating heat pipes‘” Heat Transfer Eng., vol. 29, pp. 20–44, Jul. 14. 2008. DOI: 10.1080/01457630701677114.
   Web of Science ®Google Scholar
• B. Borgmeyer and H. Ma, “Experimental investigation of oscillating motions in a flat plate pulsating heat pipe,” J. Thermophys Heat Transfer, vol. 21, pp. 405–409, 2007. DOI:10.2514/1.23263.
   Web of Science ®Google Scholar
• S. Thompson and H. Ma, “Effect of localized heating on three-dimensional flat-plate oscillating heat pipe,” Adv. Mech. Eng., vol. 2, pp. 1–10, 2010. DOI:10.1155/2010/465153.
   Google Scholar
• L. Lv, J. Li, and G. Zhou, “A robust pulsating heat pipe cooler for integrated high power LED chips,” Heat Mass Transfer, vol. 53, pp. 3305–3313, 2017. DOI:10.1007/s00231-017-2050-3.
   Web of Science ®Google Scholar
• N. Soponpongpipat, P. Sakulchangsatjaati, N. Kammuang-Lue, and P. Terdtoon, “Investigation of the startup condition of a closed-loop oscillating heat pipe,” Heat Transfer Eng., vol. 30, pp. 626–642, 2009. DOI:10.1080/01457630802656876.
   Web of Science ®Google Scholar
• J. Xu, Y. Li, and T. Wong, “High speed flow visualization of a closed loop pulsating heat pipe,” Int. J. Heat Mass Transfer, vol. 48, pp. 3338–3351, 2005. DOI:10.1016/j.ijheatmasstransfer.2005.02.034.
   Web of Science ®Google Scholar
• E. Sedighi, A. Amarloo, and B. Shafii, “Numerical and experimental investigation of flat-plate pulsating heat pipes with extra branches in the evaporator section,” Int. J. Heat Mass Transfer, vol. 126, pp. 431–441, 2018. DOI:10.1016/j.ijheatmasstransfer.2018.05.047.
   Web of Science ®Google Scholar
• Q. Sun, J. Qu, J. Yuan, and H. Wang, “Start-up characteristics of MEMS-based micro oscillating heat pipe with and without bubble nucleation,” Int. J. Heat Mass Transfer, vol. 122, pp. 515–528, 2018. DOI:10.1016/j.ijheatmasstransfer.2018.02.003.
   Web of Science ®Google Scholar
• K. Mehta and N. Mehta, “Development of flat plate oscillating heat pipe as a heat transfer device,” Front Heat Pipes (FHP), vol. 7, pp. 1–7, 2016. DOI:10.5098/fhp.7.6.
   Google Scholar
• M. Mohammadi, M. Mohammadi, A. R. Ghahremani, M. B. Shafii, and N. Mohammadi, “Experimental investigation of thermal resistance of a ferrofluidic closed-loop pulsating heat pipe,” Heat Transfer Eng., vol. 35, pp. 25–33, 2014. DOI:10.1080/01457632.2013.810086.
   Web of Science ®Google Scholar
• K. A. Stevens, S. M. Smith, and B. S. Taft, “Variation in oscillating heat pipe performance,” Appl. Therm. Eng., vol. 149, pp. 987–995, 2019. DOI:10.1016/j.applthermaleng.2018.12.113.
   Web of Science ®Google Scholar
• S. Khandekar, M. Schneider, P. Schafer, R. Kulenovic, and M. Groll, “Thermofluid dynamic study of flat-plate closed-loop pulsating heat pipes,” Microscale Thermophys. Eng., vol. 6, pp. 303–317, 2002. DOI:10.1080/10893950290098340.
   Google Scholar
• H. Yang, S. Khandekar, and M. Groll, “Operational characteristics of flat plate closed loop pulsating heat pipes,” 13th International Heat Pipe Conference, Shanghai, China, 2004, pp. 291–297.
   Google Scholar
• W. Qu and B. Yang, “Performances of flat plate pulsating heat pipes,” ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer, Shanghai, China, 2009, pp. 403–410.
   Google Scholar
• P. Cheng, S. Thompson, J. Boswell, and H. Ma, “An investigation of flat-plate oscillating heat pipes,” J. Electron. Packag., vol. 132, pp. 041009, 2010. DOI:10.1115/1.4002726.
   Web of Science ®Google Scholar
• K. Chien, Y. Chen, Y. Lin, C. Wang, and K. Yang, “The experimental studies of flat-plate closed-loop pulsating heat pipes,” The tenth international heat pipe symposium, Taipei, Taiwan, 2011, pp. 212–216.
   Google Scholar
• F. Lefèvre, et al., “Flat plate heat pipes: from observations to the modeling of the capillary structure,” Front Heat Pipes (FHP), vol. 3, pp. 1–9, 2012. DOI:10.5098/fhp.v3.1.3001.
   Google Scholar
• M. P. Hoesing and G. J. Michna, “Integration of a pulsating heat pipe in a flat plate heat sink,” ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Chicago, IL, 2014.
   Google Scholar
• F. Laun, H. Lu, and H. Ma, “An experimental investigation of an oscillating heat pipe heat spreader,” J. Therm. Sci. Eng. Appl., vol. 7, pp. 2100–2105, 2015. DOI:10.1115/1.4026815.
   Web of Science ®Google Scholar
• T. Hao, X. Ma, Z. Lan, N. Li, and Y. Zhao, “Effects of superhydrophobic and superhydrophilic surfaces on heat transfer and oscillating motion of an oscillating heat pipe,” J. Heat Transfer, vol. 136, pp. 082001, 2014. DOI:10.1115/1.4027390.
   Web of Science ®Google Scholar
• S. M. Thompson, H. Lu, and H. Ma, “Thermal spreading with flat-plate oscillating heat pipes,” J. Thermophys Heat Transfer, vol. 29, pp. 338–345, 2014. DOI:10.2514/1.T4168.
   Web of Science ®Google Scholar
• V. Manno, et al., “Thermal-hydraulic characterization of a flat plate pulsating heat pipe for automotive applications,” Interfacial Phenom. Heat Transf., vol. 3, 2015. DOI: 10.1615/InterfacPhenomHeatTransfer.2016013273.
   Web of Science ®Google Scholar
• V. Ayel et al., “Experimental study of a closed loop flat plate pulsating heat pipe under a varying gravity force,” Int. J. Therm. Sci., vol. 96, pp. 23–34, 2015. DOI: 10.1016/j.ijthermalsci.2015.04.010.
   Web of Science ®Google Scholar
• F. Zhang, et al., “Effect of hydrophilic nanostructured cupric oxide surfaces on the heat transport capability of a flat-plate oscillating heat pipe,” J. Heat Transfer, vol. 138, pp. 062901, 2016. DOI:10.1115/1.4032608.
   Web of Science ®Google Scholar
• J. Lee and S. J. Kim, “Effect of channel geometry on the operating limit of micro pulsating heat pipes,” Int. J. Heat Mass Transf., vol. 107, pp. 204–212, 2017. DOI:10.1016/j.ijheatmasstransfer.2016.11.036.
   Web of Science ®Google Scholar
• D. S. Jang, J. S. Lee, J. H. Ahn, D. Kim, and Y. Kim, “Flow patterns and heat transfer characteristics of flat plate pulsating heat pipes with various asymmetric and aspect ratios of the channels,” Appl. Therm. Eng., vol. 114, pp. 211–220, 2017. DOI:10.1016/j.applthermaleng.2016.11.189.
   Web of Science ®Google Scholar
• A. Yoon and S. J. Kim, “Characteristics of oscillating flow in a micro pulsating heat pipe: fundamental-mode oscillation,” Int. J. Heat Mass Transfer, vol. 109, pp. 242–253, 2017. DOI:10.1016/j.ijheatmasstransfer.2017.02.003.
   Web of Science ®Google Scholar
• M. Hoesing, “Integration of a pulsating heat pipe in a flat plate heat sink,” J. Undergraduate Res., vol. 12, pp. 4, 2014. openprairie.sdstate.edu/jur/vol12/iss1/4.
   Google Scholar
• D. Bastakoti, H. Zhang, D. Li, W. Cai, and F. Li. “An overview on the developing trend of pulsating heat pipe and its performance,” Appl. Therm. Eng., 2018. DOI: 10.1016/j.applthermaleng.2018.05.121.
   PubMed Web of Science ®Google Scholar
• M. B. Shafii, A. Faghri, and Y. Zhang, “Thermal modeling of unlooped and looped pulsating heat pipes,” J. Heat Transfer, vol. 123, pp. 1159–1172, 2001.
   Web of Science ®Google Scholar
• H. Yang, S. Khandekar, and M. Groll, “Operational limit of closed loop pulsating heat pipes,” Appl. Therm. Eng., vol. 28, pp. 49–59, 2008.
   Web of Science ®Google Scholar
• Q. Cai, C. Chen, and J. F. Asfia, “Operating characteristic investigations in pulsating heat pipe,” J. Heat Transfer, vol. 128, pp. 1329–1334, 2006. DOI:10.1115/1.2349509.
   Web of Science ®Google Scholar
• P. Charoensawan, S. Khandekar, M. Groll, and P. Terdtoon, “Closed loop pulsating heat pipes: part A: parametric experimental investigations,” Appl. Therm. Eng., vol. 23, pp. 2009–2020, 2003. DOI:10.1016/S1359-4311(03)00159-5.
   Web of Science ®Google Scholar
• M. Saha, C. Feroz, F. Ahmed, and T. Mujib, “Thermal performance of an open loop closed end pulsating heat pipe,” Heat Mass Transfer, vol. 48, pp. 259–265, 2012. DOI:10.1007/s00231-011-0882-9.
   Web of Science ®Google Scholar
• J. Qu, H. Wu, and P. Cheng, “Start-up, heat transfer and flow characteristics of silicon-based micro pulsating heat pipes,” Int. J. Heat Mass Transf., vol. 55, pp. 6109–6120, 2012. DOI:10.1016/j.ijheatmasstransfer.2012.06.024.
   Web of Science ®Google Scholar
• H. Ma. Oscillating Heat Pipes. Springer, New York, 2015.
   Google Scholar
• T. Hao, H. Ma, and X. Ma, “Heat transfer performance of polytetrafluoroethylene oscillating heat pipe with water, ethanol, and acetone as working fluids,” Int. J. Heat Mass Transfer, vol. 131, pp. 109–120, 2019. DOI:10.1016/j.ijheatmasstransfer.2018.08.133.
   Web of Science ®Google Scholar
• H. Wang, D. Yin, and H. Ma, “Heat transfer analysis of a liquid plug flowing in a tube,” Heat Transfer Res., vol. 48, pp. 757–769, 2017.
   Web of Science ®Google Scholar
• T. Hao, X. Ma, and Z. Lan, “Effects of hydrophilic and hydrophobic surfaces on start-up performance of an oscillating heat pipe,” J. Heat Transfer, vol. 140, pp. 012002, 2018.
   Web of Science ®Google Scholar
• W. Wits, G. Groeneveld, and H. J. Van Gerner. “Experimental investigation of a flat-plate closed-loop pulsating heat pipe,” J. Heat Transfer, 2018. DOI: 10.1115/1.4042367.
   PubMed Web of Science ®Google Scholar
• J. Lim and S. J. Kim, “Fabrication and experimental evaluation of a polymer-based flexible pulsating heat pipe,” Energy Convers. Manage., vol. 156, pp. 358–364, 2018.
   Web of Science ®Google Scholar
• Q. Liang, et al., “Startup and transport characteristics of oscillating heat pipe using ionic liquids,” Int. Commun. Heat Mass Transfer, vol. 94, pp. 1–13, 2018.
   Web of Science ®Google Scholar
• J. Lee, Y. Joo, and S. J. Kim, “Effects of the number of turns and the inclination angle on the operating limit of micro pulsating heat pipes,” Int. J. Heat Mass Transfer, vol. 124, pp. 1172–1180, 2018.
   Web of Science ®Google Scholar
• W. Kim and S. J. Kim, “Effect of reentrant cavities on the thermal performance of a pulsating heat pipe,” Appl. Therm. Eng., vol. 133, pp. 61–69, 2018.
   Web of Science ®Google Scholar
• A. Cecere, et al. “Experimental analysis of a flat plate pulsating heat pipe with self-rewetting fluids during a parabolic flight campaign,” Acta Astronaut., vol. 147, pp. 454–461, 2018.
   Web of Science ®Google Scholar
• V. Ayel, et al., “Visualization of flow patterns in closed loop flat plate pulsating heat pipe acting as hybrid thermosyphons under various gravity levels,” Heat Transfer Eng., pp. 1–11, 2018. DOI: 10.1080/01457632.2018.1426244.
   Web of Science ®Google Scholar
• J. Qu, Q. Sun, H. Wang, D. Zhang, and J. Yuan, “Performance characteristics of flat-plate oscillating heat pipe with porous metal-foam wicks,” Int. J. Heat Mass Transfer, vol. 137, pp. 20–30, 2019. DOI:10.1016/j.ijheatmasstransfer.2019.03.107.
   Web of Science ®Google Scholar
• J. Lim and S. J. Kim, “Effect of a channel layout on the thermal performance of a flat plate micro pulsating heat pipe under the local heating condition,” Int. J. Heat Mass Transfer, vol. 137, pp. 1232–1240, 2019. DOI:10.1016/j.ijheatmasstransfer.2019.03.121.
   Web of Science ®Google Scholar
• S. Jun and S. J. Kim, “Experimental investigation on the thermodynamic state of vapor plugs in pulsating heat pipes,” Int. J. Heat Mass Transfer, vol. 134, pp. 321–328, May. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.01.053.
   Web of Science ®Google Scholar
• K. Mehta, P. Gamit, and A. Pandey, “Influence of working fluids on thermal performance of flat plate oscillating heat pipe,” Int. J. Res. Appl. Sci. Eng. Technol., vol. 7, pp. 399–403, 2019.
   Google Scholar
• X. Cui, Y. Zhu, Z. Li, and S. Shun, “Combination study of operation characteristics and heat transfer mechanism for pulsating heat pipe,” Appl. Therm. Eng., vol. 65, pp. 394–402, 2014.
   Web of Science ®Google Scholar
• A. Yoon and S. J. Kim, “Experimental and theoretical studies on oscillation frequencies of liquid slugs in micro pulsating heat pipes,” Energy Convers. Manage., vol. 181, pp. 48–58, 2019. DOI:10.1016/j.enconman.2018.11.060.
   Web of Science ®Google Scholar
• Q. Sun, J. Qu, J. Yuan, and Q. Wang, “Operational characteristics of an MEMS-based micro oscillating heat pipe,” Appl. Therm. Eng., vol. 124, pp. 1269–1278, 2017.
   Web of Science ®Google Scholar
• M. Vassilev, Y. Avenas, C. Schaeffer, J.-L. Schanen, and J. Schulz-Harder, “Experimental study of a pulsating heat pipe with combined circular and square section channels,” 2007 IEEE Industry Applications Annual Meeting, New Orleans, LA, 2007, pp. 1419–1425.
   Google Scholar