Experimental study on two-phase pressure drop and flow boiling heat transfer in a micro pin fin channel heat sink under constant heat flux

References

• W. Qu and A. Siu-Ho, “Liquid single-phase flow in an array of micro-pin-fins—part I: heat transfer characteristics,” J. Heat Transfer, vol. 130, pp. 12, 2008.
   Web of Science ®Google Scholar
• A. M. S. Ho, W. Qu, and F. Pfefferkorn, “Pressure drop and heat transfer in a single-phase micro-pin-fin heat sink,”in ASME 2006 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers Digital Collection, Jan. 2006, pp. 213–220.
   Google Scholar
• K. A. Moores and Y. K. Joshi, “Effect of tip clearance on the thermal and hydrodynamic performance of a shrouded pin fin array,” J. Heat Transfer, vol. 125, no. 6, pp.999–1006, 2003. DOI: 10.1115/1.1621897.
   Web of Science ®Google Scholar
• M. K. Chyu, Y. C. Hsing, T. P. Shih, and V. Natarajan (1999). “Heat transfer contributions of pins and endwall in pin-fin arrays: effects of thermal boundary condition modeling,”vol. 121, pp.257–263. DOI: 10.1115/1.2841309
   Google Scholar
• M. Liu, D. Liu, S. Xu, and Y. Chen, “Experimental study on liquid flow and heat transfer in micro square pin fin heat sink,” Int. J. Heat Mass Transfer, vol. 54, no. 25–26, pp.5602–5611, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.07.013.
   Web of Science ®Google Scholar
• Y. J. Lee, P. K. Singh, and P. S. Lee, “Fluid flow and heat transfer investigations on enhanced microchannel heat sink using oblique fins with parametric study,” Int. J. Heat Mass Transfer, vol. 81, pp. 325–336, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.10.018.
   Web of Science ®Google Scholar
• W. Qu and A. Siu-Ho, “Measurement and prediction of pressure drop in a two-phase micro-pin-fin heat sink,” Int. J. Heat Mass Transfer, vol. 52, no. 21–22, pp.5173–5184, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.05.007.
   Web of Science ®Google Scholar
• J. Mita and W. Qu, “Pressure drop of water flow across a micro-pin–fin array part 1: isothermal liquid single-phase flow,” Int. J. Heat Mass Transfer, vol. 89, pp. 1073–1082, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.06.006.
   Web of Science ®Google Scholar
• C. A. Konishi and W. Qu, “Toward a generalized correlation for liquid–vapor two-phase frictional pressure drop across staggered micro-pin-fin arrays,” Int. Commun. Heat Mass Transfer, vol. 75, pp. 253–261, 2016. DOI: 10.1016/j.icheatmasstransfer.2016.04.027.
   Web of Science ®Google Scholar
• C. Falsetti, M. Magnini, and J. R. Thome, “A new flow pattern-based boiling heat transfer model for micro-pin fin evaporators,” Int. J. Heat Mass Transfer, vol. 122, pp. 967–982, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.02.050.
   Web of Science ®Google Scholar
• J. R. Thome, V. Dupont, and A. M. Jacobi, “Heat transfer model for evaporation in microchannels. Part I: presentation of the model,” Int. J. Heat Mass Transfer, vol. 47, no. 14–16, pp.3375–3385, 2004. DOI: 10.1016/j.ijheatmasstransfer.2004.01.006.
   Web of Science ®Google Scholar
• V. Dupont, J. R. Thome, and A. M. Jacobi, “Heat transfer model for evaporation in microchannels. Part II: comparison with the database,” Int. J. Heat Mass Transfer, vol. 47, no. 14–16, pp.3387–3401, 2004. DOI: 10.1016/j.ijheatmasstransfer.2004.01.007.
   Web of Science ®Google Scholar
• A. Cioncolini and J. R. Thome, “Algebraic turbulence modeling in adiabatic and evaporating annular two-phase flow,” Int. J. Heat Fluid Flow, vol. 32, no. 4, pp.805–817, 2011. DOI: 10.1016/j.ijheatfluidflow.2011.05.006.
   Web of Science ®Google Scholar
• A. Indi, S. V. Prabhu, and R. P. Vedula, “Local heat transfer distribution in a rectangular pin channel with and without vortex generators,” Exp. Heat Transfer, vol. 24, no. 1, pp.34–58, 2011. DOI: 10.1080/08916151003628556.
   Web of Science ®Google Scholar
• N. Guan, G. Jiang, Z. G. Liu, and C. W. Zhang, “Effects of heating load on flow resistance and convective heat transfer in micro-pin-fin heat sinks with different cross-section shapes,” Exp. Heat Transfer, vol. 29, no. 5, pp.673–690, 2016. DOI: 10.1080/08916152.2015.1086841.
   Web of Science ®Google Scholar
• D. Yang, Z. Jin, Y. Wang, G. Ding, and G. Wang, “Heat removal capacity of laminar coolant flow in a micro channel heat sink with different pin fins,” Int. J. Heat Mass Transfer, vol. 113, pp. 366–372, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.05.106.
   Web of Science ®Google Scholar
• S. Caliskan, A. Dogan, and I. Kotcioglu, “Experimental investigation of heat transfer from different pin fin in a rectangular channel,” Exp. Heat Transfer, vol. 32, no. 4, pp.376–392, 2019. DOI: 10.1080/08916152.2018.1526228.
   Web of Science ®Google Scholar
• G. Wang, N. Qian, and G. Ding, “Heat transfer enhancement in microchannel heat sink with bidirectional rib,” Int. J. Heat Mass Transfer, vol. 136, pp. 597–609, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.02.018.
   Web of Science ®Google Scholar
• T. J. Cognata, D. K. Hollingsworth, and L. C. Witte, “High-speed visualization of two-phase flow in a micro-scale pin-fin heat exchanger,” Heat Transfer Eng., vol. 28, no. 10, pp.861–869, 2007. DOI: 10.1080/01457630701378309.
   Web of Science ®Google Scholar
• M. Law and P. S. Lee, “A comparative study of experimental flow boiling heat transfer and pressure characteristics in straight-and oblique-finned microchannels,” Int. J. Heat Mass Transfer, vol. 85, pp. 797–810, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.137.
   Web of Science ®Google Scholar
• Y. K. Prajapati and P. Bhandari, “Flow boiling instabilities in microchannels and their promising solutions–A review,” Exp. Therm. Fluid Sci., vol. 88, pp. 576–593, 2017. DOI: 10.1016/j.expthermflusci.2017.07.014.
   Web of Science ®Google Scholar
• F. P. Incropera, A. S. Lavine, T. L. Bergman, and D. P. DeWitt, Fundamentals of Heat and Mass Transfer. John wiley & sons, 2007.
   Google Scholar
• A. Koşar, C. Mishra, and Y. Peles (2005). “Laminar flow across a bank of low aspect ratio micro pin fins,” vol. 127, pp.419–430. DOI: 10.1115/1.1900139
   Google Scholar
• A. Zukauskas, “Heat transfer from tubes in cross flow,” Adv.Heat Transfer, vol. 8, pp. 93–160, 1972.
   Google Scholar
• J. F. Tullius, T. K. Tullius, and Y. Bayazitoglu, “Optimization of short micro pin fins in minichannels,” Int. J. Heat Mass Transfer, vol. 55, no. 15–16, pp.3921–3932, 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.03.022.
   Web of Science ®Google Scholar
• W. Qu and A. Siu-Ho, “Liquid single-phase flow in an array of micro-pin-fins— part II: pressure drop characteristics,” J. Heat Transfer, vol. 130, pp. 12, 2008.
   Web of Science ®Google Scholar
• R. S. Prasher, et al. (2007). “Nusselt number and friction factor of staggered arrays of low aspect ratio micropin-fins under cross flow for water as fluid,” vol. 129 pp.141–153. DOI: 10.1115/1.2402179
   Google Scholar
• B. E. Short Jr, P. E. Raad, and D. C. Price, “Performance of pin fin cast aluminum coldwalls, part 1: friction factor correlations,” J. Thermophys. Heat. Transfer, vol. 16, no. 3, pp.389–396, 2002. DOI: 10.2514/2.6692.
   Web of Science ®Google Scholar
• R. Roth, G. Lenk, K. Cobry, and P. Woias, “Heat transfer in freestanding microchannels with in-line and staggered pin fin structures with clearance,” Int. J. Heat Mass Transfer, vol. 67, pp. 1–15, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.07.097.
   Web of Science ®Google Scholar
• A. Zukauskas, and R. Ulinskas, “Banks of plain and finned tubes,” Fluid Mech.Heat Transfer, pp. 2, 1983.
   Google Scholar
• S. Krishnamurthy and Y. Peles, “Flow boiling of water in a circular staggered micro-pin fin heat sink,” Int. J. Heat Mass Transfer, vol. 51, no. 5–6, pp.1349–1364, 2008. DOI: 10.1016/j.ijheatmasstransfer.2007.11.026.
   Web of Science ®Google Scholar
• A. Koşar and Y. Peles, “Boiling heat transfer in a hydrofoil-based micro pin fin heat sink,” Int. J. Heat Mass Transfer, vol. 50, no. 5–6, pp.1018–1034, 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.07.032.
   Web of Science ®Google Scholar
• M. K. Jensen and J. T. Hsu, “A parametric study of boiling heat transfer in a horizontal tube bundle,” Journal of Heat Transfer, vol. 110, pp. 976–981, 1988. DOI: 10.1115/1.3250601.
   Web of Science ®Google Scholar
• D. A. McNeil, A. H. Raeisi, P. A. Kew, and P. R. Bobbili, “A comparison of flow boiling heat-transfer in in-line mini-pin fin and plane channel flows,” Appl. Therm. Eng., vol. 30, no. 16, pp.2412–2425, 2010. DOI: 10.1016/j.applthermaleng.2010.06.011.
   Web of Science ®Google Scholar