Experimental investigation on heating performance of a counter-flow vortex tube

References

• B. Zhang and X. Guo, “Prospective applications of Ranque–Hilsch vortex tubes to sustainable energy utilization and energy efficiency improvement with energy and mass separation,” Renew. Sust. Energ. Rev., vol. 89, pp. 135–150, 2018. DOI: 10.1016/j.rser.2018.02.026.
   Web of Science ®Google Scholar
• M. Selek, S. Tasdemir, K. Dincer, and S. Baskaya, “Experimental examination of the cooling performance of Ranque-Hilsch vortex tube on the cutting tool nose point of the turret lathe through infrared thermography method,” Int. J. Refrig., vol. 34, no. 3, pp.807–815, 2011. DOI: 10.1016/j.ijrefrig.2010.11.008.
   Web of Science ®Google Scholar
• A. Kumar and S. Subudhi, “Cooling and dehumidification using vortex tube,” Appl. Therm. Eng., vol. 122, pp. 181–193, 2017. DOI: 10.1016/j.applthermaleng.2017.05.015.
   Web of Science ®Google Scholar
• J. Yun, Y. Kim, and S. Yu, “Feasibility study of carbon dioxide separation from gas mixture by vortex tube,” Int. J. Heat Mass Transf., vol. 26, pp. 353–361, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.04.150.
   Google Scholar
• A. N. Shmroukh, M. Attalla, and A. A. E. Abd El-Hakim, “Experimental investigation of a novel sea water desalination system using ranque-hilsch vortex tube,” Appl. Therm. Eng., vol. 149, pp. 658–664, 2019. DOI: 10.1016/j.applthermaleng.2018.12.067.
   Web of Science ®Google Scholar
• X. Guo, B. Zhang, B. Liu, and X. Xu, “A critical review on the flow structure studies of Ranque–Hilsch vortex tubes,” Int. J. Refrig., vol. 104, pp. 51–64, 2019. DOI: 10.1016/j.ijrefrig.2019.04.030.
   Web of Science ®Google Scholar
• R. Ghezelbash, M. Farzaneh-Gord, and M. Sadi, “Performance assessment of vortex tube and vertical ground heat exchanger in reducing fuel consumption of conventional pressure drop stations,” Appl. Therm. Eng., vol. 102, pp. 213–226, 2016. DOI: 10.1016/j.applthermaleng.2016.03.110.
   Web of Science ®Google Scholar
• X. Guo and B. Zhang, “Experimental investigation on a novel pressure-driven heating system with Ranque–Hilsch vortex tube and ejector for pipeline natural gas pressure regulating process,” App.Therm. Eng., vol. 152, pp. 634–642, 2019. DOI: 10.1016/j.applthermaleng.2019.02.122.
   Web of Science ®Google Scholar
• B. Kumar, M. Kumar, A. K. Patil, and S. Jain, “Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow: an experimental study,” Exp. Heat Transf., vol. 32, no. 6, pp.524–544, 2019. DOI: 10.1080/08916152.2018.1545808.
   Web of Science ®Google Scholar
• R. Datt, M. S. Bhist, A. Darshan Kotiyal, R. Maithani, and A. Kumar, “Development of new correlations for heat transfer and friction loss of solid ring with combined square wing twisted tape inserts heat exchanger tube,” Exp. Heat Transf., vol. 32, no. 2, pp.179–200, 2019. DOI: 10.1080/08916152.2018.1505784.
   Web of Science ®Google Scholar
• R. Wan, Y. Wang, R. Kavtaradze, H. Ji, and X. He, “Research on the air-side thermal hydraulic performance of louvered fin and flat tube heat exchangers under low-pressure environment,” Exp. Heat Transf., vol. 33, no. 1, pp.81–99, 2020. DOI: 10.1080/08916152.2019.1570985.
   Web of Science ®Google Scholar
• R. Westley, A Bibliography and Survey of the Vortex Tube. UK: College of Aeronautics, Cranfield note, 1954.
   Google Scholar
• S. Eiamsa-ard and P. Promvonge, “Review of Ranque–Hilsch effects in vortex tubes,” Renew. Sust. Energ. Rev., vol. 12, no. 7, pp.1822–1842, 2008. DOI: 10.1016/j.rser.2007.03.006.
   Web of Science ®Google Scholar
• Y. Xue, M. Arjomandi, and R. Kelso, “A critical review of temperature separation in a vortex tube,” Exp. Therm. Fluid Sci., vol. 34, no. 8, pp.1367–1374, 2010. DOI: 10.1016/j.expthermflusci.2010.06.010.
   Web of Science ®Google Scholar
• S. Subudhi and M. Sen, “Review of Ranque–Hilsch vortex tube experiments using air,” Renew. Sust. Energ. Rev., vol. 52, pp. 172–178, 2015. DOI: 10.1016/j.rser.2015.07.103.
   Web of Science ®Google Scholar
• T. K. Sharma, G. A. P. Rao, and K. M. Murthy, “Numerical analysis of a vortex tube: a review,” Arch. Comput. Methods Eng., vol. 24, no. 2, pp.251–280, 2017. DOI: 10.1007/s11831-016-9166-3.
   Web of Science ®Google Scholar
• V. Kirmaci and H. Kaya, “Effects of working fluid, nozzle number, nozzle material and connection type on thermal performance of a Ranque–Hilsch vortex tube: A review,” Int. J. Refrig., vol. 91, pp. 254–266, 2018. DOI: 10.1016/j.ijrefrig.2018.05.005.
   Web of Science ®Google Scholar
• M. H. Saidi and M. S. Valipour, “Experimental modeling of vortex tube refrigerator,” Appl. Therm. Eng., vol. 23, no. 15, pp.1971–1980, 2003. DOI: 10.1016/S1359-4311(03)00146-7.
   Web of Science ®Google Scholar
• S. E. Rafiee and M. M. Sadeghiazad, “Experimental and 3D CFD investigation on heat transfer and energy separation inside a counter flow vortex tube using different shapes of hot control valves,” Appl. Therm. Eng., vol. 110, pp. 648–664, 2017. DOI: 10.1016/j.applthermaleng.2016.08.166.
   Web of Science ®Google Scholar
• P. Promvonge and S. Eiamsa-ard, “Investigation on the vortex thermal separation in a vortex tube refrigerator,” Sci. Asia, vol. 31, no. 3, pp.215–223, 2005. DOI: 10.2306/scienceasia1513-1874.2005.31.215.
   Google Scholar
• M. Attalla, H. Ahmed, M. S. Ahmed, and A. A. Ahmed, “Experimental investigation for thermal performance of series and parallel Ranque-Hilsch vortex tube systems,” Appl. Therm. Eng., vol. 123, pp. 327–339, 2017. DOI: 10.1016/j.applthermaleng.2017.05.084.
   Web of Science ®Google Scholar
• V. Kirmaci, H. Kaya, and I. Cebeci, “An experimental and energy analysis of a thermal performance of a counter flow Ranque–Hilsch vortex tube with different nozzle materials,” Int. J. Refrig., vol. 85, pp. 240–254, 2018. DOI: 10.1016/j.ijrefrig.2017.10.003.
   Web of Science ®Google Scholar
• H. Kaya, F. Günver, and V. Kirmaci, “Experimental investigation of thermal performance of parallel connected vortex tubes with various nozzle materials,” Appl. Therm. Eng., vol. 136, pp. 287–292, 2018. DOI: 10.1016/j.applthermaleng.2018.02.105.
   Web of Science ®Google Scholar
• O. Aydın and M. Baki, “An experimental study on the design parameters of a counterflow vortex tube,” Energy, vol. 31, no. 14, pp.2763–2772, 2006. DOI: 10.1016/j.energy.2005.11.017.
   Web of Science ®Google Scholar
• A. M. Pinar, O. Uluer, and V. Kırmacı, “Statistical assessment of counter-flow vortex tube performance for different nozzle numbers, cold mass fractions, and inlet pressures via Taguchi method,” Exp. Heat Tran., vol. 22, no. 4, pp.271–282, 2009. DOI: 10.1080/08916150903099058.
   Web of Science ®Google Scholar
• M. Avci, “The effects of nozzle aspect ratio and nozzle number on the performance of the Ranque–Hilsch vortex tube,” Appl. Therm. Eng., vol. 50, no. 1, pp.302–308, 2013. DOI: 10.1016/j.applthermaleng.2012.06.048.
   Web of Science ®Google Scholar
• M. Attalla, H. Ahmed, M. S. Ahmed, and A. A. El-Wafa, “An experimental study of nozzle number on Ranque Hilsch counter-flow vortex tube,” Exp. Therm. Fluid Sci., vol. 82, pp. 381–389, 2017. DOI: 10.1016/j.expthermflusci.2016.11.034.
   Web of Science ®Google Scholar
• R. J. Moffat, “Describing the uncertainties in experimental results,” Exp.Therm. Fluid Sci., vol. 1, no. 1, pp.3–17, 1988. DOI: 10.1016/0894-1777(88)90043-X.
   Web of Science ®Google Scholar
• H. R. Thakare and A. D. Parekh, “Experimental investigation & CFD analysis of Ranque–Hilsch vortex tube,” Energy, vol. 133, pp. 284–298, 2017. DOI: 10.1016/j.energy.2017.05.070.
   Web of Science ®Google Scholar
• H. M. Skye, G. F. Nellis, and S. A. Klein, “Comparison of CFD analysis to empirical data in a commercial vortex tube,” Int. J. Refrig., vol. 29, no. 1, pp.71–80, 2006. DOI: 10.1016/j.ijrefrig.2005.05.004.
   Web of Science ®Google Scholar