References
- A. Roshko, “Experiments on the flow past a circular cylinder at very high Reynolds number,” J. Fluid Mech., vol. 10, pp. 345–356, 1961. DOI: 10.1017/S0022112061000950.
- A. Zukauskas, “Heat transfer from tubes in crossflow,” Adv. Heat Transfer, vol. 8, pp. 93–160, 1972.
- S. Aiba and Y. Yamazaki, “An experimental investigation of heat transfer around a tube in a bank,” ASME. J. Heat Transfer, vol. 98, no. 3, pp. 503–508, August. 1 1976. DOI: 10.1115/1.3450583.
- W. A. Khan, J. R. Culham, and M. M. Yovanovich, “convection heat transfer from tube banks in crossflow: analytical approach,” Int. J. Heat Mass Transfer, vol. 49, no. 25–26, pp.4831–4838, 2006. DOI: 10.1016/j.ijheatmasstransfer.2006.05.042.
- M. CHENG and P. M. MORETTI, “Experimental study of the flow field downstream of a single tube row,” Exp. Therm. Fluid Sci., vol. 1, pp. 69–74, 1988. DOI: 10.1016/0894-1777(88)90049-0.
- V. Mansingh and P. H. Oosthuizen, “Effects of splitter plates on the wake flow behind a bluff body,” A1AA J., vol. 28, pp. 778–783, 1990.
- K. Kwon and H. Choi, “Control of laminar vortex shedding behind a circular cylinder using tabs,” Phys. Fluids, vol. 8, pp. 479–486, 1996. DOI: 10.1063/1.868801.
- W. C. Park and H. Higuchi, “Numerical investigation of wake flow control by a splitter plate,” KSME Int. J., vol. 12, pp. 123–131, 1998. DOI: 10.1007/BF02946540.
- H. Akilli, C. Karakus, A. Akar, B. Sabin, and N. F. Tumen, “Control of vortex shedding of circular cylinder in shallow water flow using an attached splitter plate,” J. Fluids Eng. Trans. ASME., vol. 130, pp. 414011–4140111, 2008. DOI: 10.1115/1.2903813.
- S. A. E. Sayed Ahmed, O. M. Mesalhy, and M. A. Abdelatief, “Flow and heat transfer enhancement in tube heat exchangers,” Heat Mass Transfer., vol. 51, pp. 1607–1630, 2015. DOI: 10.1007/s00231-015-1669-1.
- R. Sajedi, M. Taghilou, and M. Jafari, “Experimental and numerical study on the optimal fin numbering in an external extended finned tube heat exchanger,” Appl. Therm. Eng., vol. 83, pp. 139–146, 2015. DOI: 10.1016/j.applthermaleng.2014.12.040.
- C. K. Mangrulkar, A. S. Dhoble, S. G. Chakrabarty, and U. S. Wankhede, “Experimental and CFD prediction of heat transfer and friction factor characteristics in cross flow tube bank with integral splitter plate,” Int J Heat Mass Transf., vol. 104, pp. 964–978, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.09.013.
- C. K. Mangrulkar, A. Kumar, S. Dhoble, A. R. Deshmukh, and S. A. Mandavgane, “Numerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflow,” Appl. Therm. Eng., vol. 110, pp. 521–538, 2017. DOI: 10.1016/j.applthermaleng.2016.08.174.
- J. Xu, et al., “Numerical simulation of the flow and heat-transfer characteristics of an aligned external three-dimensional rectangular-finned tube bank,” Appl. Therm. Eng., vol. 145, pp. 110–122, 2018. DOI: 10.1016/j.applthermaleng.2018.09.022.
- C. K. Mangrulkar, et al. “Thermal performance escalation of cross flow heat exchanger using in-line elliptical tubes,” Exp. Heat Transfer., 2019. DOI: 10.1080/08916152.2019.1704946.
- X.-L. Tian, et al. “Effects of fin pitch and tube diameter on the air-side performance of tube bank fin heat exchanger with the fins punched plane and curved rectangular vortex generators,” Exp. Heat Transfer., 2017. DOI: 10.1080/08916152.2017.1410503.
- K. M. Jung, R. Ajith Krishnan, G. Udaya Kumar, and H. J. Lee, “Experimental study on two-phase pressure drop and flow boiling heat transfer in a micro pin fin channel heat sink under constant heat flux,” Exp. Heat Transfer, pp. 1–24, 2020. DOI: 10.1080/08916152.2020.1725182.
- A. Zukauskas, “Heat transfer from tubes in cross flow,” in Handbook of Single Phase Convective Heat Transfer, S. Kakac, R. K. Shah, and W. Aung, Eds.. New York: Wiley Interscience, 1987.
- M. Yasuo, H. Kunio, and N. Takayoshi, “A fundamental study of symmetrical vortex generation behind a cylinder by wake heating or by splitter plate or mesh,” Int. J. Heat Mass Transfer, vol. 29, pp. 1193–1201, 1986. DOI: 10.1016/0017-9310(86)90151-1.