Prediction of heat transfer in a circular tube with aluminum and Cr-Ni alloy pins using artificial neural network

References

• L. Tijing, “A study on heat transfer enhancement using straight and twisted internal fin insert,” Int. Commun. Heat Mass Transfer, vol. 33, no. 1, pp.719–726, 2006. DOI: 10.1016/j.icheatmasstransfer.2006.02.006.
   Google Scholar
• K. Yakut, “Optimum design PARAMETERS of a heat exchanger having hexagonal fins,” Appl. Energy, vol. 83, no. 2, pp.82–98, 2006. DOI: 10.1016/j.apenergy.2005.01.007.
   Web of Science ®Google Scholar
• M. Didarul, “Study on heat transfer and fluid flow characteristics with short rectangular plate fin of different pattern,” Exp. Therm. Fluid Sci., vol. 31, no. 4, pp.367–379, 2007. DOI: 10.1016/j.expthermflusci.2006.05.009.
   Web of Science ®Google Scholar
• A. Khalled, “Heat transfer enhancement in hairy fin system,” Appl. Therm. Eng., vol. 27, no. 1, pp.250–257, 2007. DOI: 10.1016/j.applthermaleng.2006.04.012.
   Web of Science ®Google Scholar
• K. Bilen, M. Cetin, H. Gul, and T. Balta, “The investigation of groove geometry effect on heat transfer for internally grooved tubes,” Appl. Therm. Eng., vol. 29, no. 4, pp.753–761, 2009. DOI: 10.1016/j.applthermaleng.2008.04.008.
   Web of Science ®Google Scholar
• J. Zhang, Y. Zhao, Y. Diao, and Y. Zhang, “An experimental study on fluid flow and heat transfer in a multiport minichannel flat tube with micro-fin structures,” Int. J. Heat Mass Transfer, vol. 84, pp. 511–520, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.049.
   Web of Science ®Google Scholar
• M. Eren and S. Calıskan, “Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method,” Int. J. Heat Mass Transfer, vol. 102, pp. 1108–1122, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.07.005.
   Web of Science ®Google Scholar
• V. Badescu, “Smooth and non-smooth optimal pin fin profiles beyond the Schmidt optimality assumption and “length-of-arc” approximation,” Appl. Math. Model., vol. 47, pp. 358–380, 2017. DOI: 10.1016/j.apm.2017.03.011.
   Web of Science ®Google Scholar
• S. Caliskan, A. Dogan, and I. Kotcioglu, “Experimental investigation of heat transfer from different pin fin in a rectangular channel,” Exp. Heat Transfer, vol. 32, no. 4, pp.376–392, 2019. DOI: 10.1080/08916152.2018.1526228.
   Web of Science ®Google Scholar
• A. S. Patil, S. S. Kore, and N. K. Sane, “Thermal performance of tube exchanger enhanced with hexagonal ring turbulators,” Exp. Heat Transfer, vol. 33, no. 5, pp.455–470, 2020. DOI: 10.1080/08916152.2019.1656302.
   Web of Science ®Google Scholar
• R. Maithani and A. Kumar, “Correlations development for Nusselt number and friction factor in a dimpled surface heat exchanger tube,” Exp. Heat Transfer, vol. 33, no. 2, pp.101–122, 2020. DOI: 10.1080/08916152.2019.1573863.
   Web of Science ®Google Scholar
• K. L. Kirsch and K. A. Thole, “Pressure loss and heat transfer performance for additively and conventionally manufactured pin fin arrays,” Int. J. Heat Mass Transfer, vol. 108, pp. 2502–2513, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.01.095.
   Web of Science ®Google Scholar
• V. T. Morgan, “The overall convective heat transfer from smooth circular cylinders,” Adv. Heat Transfer, vol. 11, pp. 199–264, 1975.
   Google Scholar
• R. M. Fand and J. Brucker, “A correlation for heat transfer by natural convection from horizontal cylinders that accounts for viscous dissipation,” Int. J. Heat Mass Transfer, vol. 26, pp. 709–726, 1983. DOI: 10.1016/0017-9310(83)90021-2.
   Web of Science ®Google Scholar
• G. J. Zdaniuk, L. M. Chamra, and D. K. Walters, “Heat transfer and friction in helically-finned tubes using artificial neural networks,” Int. J. Heat Mass Transfer, vol. 50, no. 23, pp.4713–4723, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.03.043.
   Web of Science ®Google Scholar
• A. Pacheco-Vega, S. Mihir, K. T. Yang, and L. M. Rodney, “Neural network analysis of fin-tube refrigerating heat exchanger with limited experimental data,” Int. J. Heat Mass Transfer, vol. 44, no. 4, pp.763–770, 2001.
   Web of Science ®Google Scholar
• M. M. Tafarroj, et al., “Artificial neural network modeling of nanofluid flow in a microchannel heat sink using experimental data,” Int. Commun. Heat Mass Transfer, vol. 86, pp. 25–31, 2017. DOI: 10.1016/j.icheatmasstransfer.2017.05.020.
   Web of Science ®Google Scholar
• M. H. Esfe, et al., “Designing artificial neural network on thermal conductivity of Al2O3–water–EG (60–40 %) nanofluid using experimental data,” J. Therm. Anal. Calorim., vol. 126, pp. 837–843, 2016. DOI: 10.1007/s10973-016-5469-8.
   Web of Science ®Google Scholar
• M. Afrand, D. Toghraie, and N. Sina, “Experimental study on thermal conductivity of water-based Fe3O4 nanofluid: development of a new correlation and modeled by artificial neural network,” Int. Commun. Heat Mass Transfer, vol. 75, pp. 262–269, 2016. DOI: 10.1016/j.icheatmasstransfer.2016.04.023.
   Web of Science ®Google Scholar
• J. Krzywanski and W. Nowak, “Modeling of heat transfer coefficient in the furnace of CFB boilers by artificial neural network approach,” Int. J. Heat Mass Transfer, vol. 55, pp. 4246–4253, 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.03.066.
   Web of Science ®Google Scholar
• M. Sheikholeslami, et al., “Effect of magnetic field on Cu–water nanofluid heat transfer using GMDH-type neural network,” Neural Comput. Appl., vol. 25, no. 1, pp.171–178, 2014. DOI: 10.1007/s00521-013-1459-y.
   Web of Science ®Google Scholar
• M. A. Hakeem and M. Kamil, “Analysis of artificial neural network in prediction of circulation rate for a natural circulation vertical thermosiphon reboiler,” Appl. Therm. Eng., vol. 112, pp. 1057–1069, 2017. DOI: 10.1016/j.applthermaleng.2016.10.119.
   Web of Science ®Google Scholar
• M. A. Hakeem, M. Kamil, and M. Asif, “Prediction of boiling heat transfer coefficients in pool boiling of liquids using artificial neural network,” J. Sci. Ind. Res., vol. 73, pp. 536–540, 2014.
   Web of Science ®Google Scholar
• J. Wang and B. Malakooti, “A feedforward neural network for multiple criteria decision making,” Comput. Oper. Res., vol. 19, no. 2, pp.151–167, 1992. DOI: 10.1016/0305-0548(92)90089-N.
   Web of Science ®Google Scholar
• Y. Islamoglu and A. Kurt, “Heat transfer analysis using ann’s with experimental data for air flowing in corrugated channels,” Int. J. Heat Mass Transfer, vol. 47, pp. 1361–1365, 2004. DOI: 10.1016/j.ijheatmasstransfer.2003.07.031.
   Web of Science ®Google Scholar
• H. Peng and X. Ling, “Neural networks analysis of thermal characteristics on plate-fin heat exchangers with limited experimental data,” Appl. Therm. Eng., vol. 29, no. 11–12, pp.2251–2256, 2009. DOI: 10.1016/j.applthermaleng.2008.11.011.
   Web of Science ®Google Scholar
• A. Parcheco-Vega, G. Diaz, M. Sen, K. T. Yang, and R. L. McClain, “Heat rate predictions air–water heat exchangers using correlations and neural networks,” J. Heat Transfer Trans. ASME, vol. 123, no. 2, pp.348–354, 2001. DOI: 10.1115/1.1351167.
   Web of Science ®Google Scholar
• J. Thibault and B. P. A. Grandjean, “A neural network methodology for heat transfer data analysis,” Int. J. Heat Mass Transfer, vol. 34, no. 8, pp.2063–2070, 1991. DOI: 10.1016/0017-9310(91)90217-3.
   Web of Science ®Google Scholar
• A. J. Ghajar, L. M. Tam, and S. C. Tam, “Improved heat transfer correlation in the transition region for a circular tube with three inlet configurations using artificial neural networks,” Heat Transfer Eng., vol. 25, no. 2, pp.30–40, 2004. DOI: 10.1080/01457630490276097.
   Web of Science ®Google Scholar
• M. J. Zarei, H. R. Ansari, and P. Keshavarz, “Prediction of pool boiling heat transfer coefficient for various nano-refrigerants utilizing artificial neural networks,” J. Therm. Anal. Calorim., vol. 139, pp. 3757–3768, 2020. DOI: 10.1007/s10973-019-08746-z.
   Web of Science ®Google Scholar
• S. Haykin, Neural Networks: A Comprehensive Foundation. 2th ed, USA: Prentice Hall PTR, 2004, pp. 41.
   Google Scholar
• Nouri-Borujerdi and M. Nakhchi, “Prediction of local shear stress and heat transfer between internal rotating cylinder and longitudinal cavities on stationary cylinder with various shapes,” Int. J. Therm. Sci, vol. 138, pp. 512–520, 2019. DOI: 10.1016/j.ijthermalsci.2019.01.016.
   Web of Science ®Google Scholar
• S. J. Kline and F. A. McClintock, “Describing Uncertainties in Single-Sample Experiments,” Mech. Eng., vol. 75, pp. 3–8, 1953.
   Google Scholar
• J. P. Holman, Heat Transfer. 10th ed, New York: McGraw-Hill, 1966, pp. 273.
   Google Scholar
• S. J. Kline and F. A. McClintock, “Describing uncertainties in single sample experiments,” Mech. Eng., vol. 75, pp. 385–387, 1953.
   Google Scholar