References
- T. Kaya and T. T. Hoang, “Mathematical modeling of loop heat pipes and experimental validation,” J. Thermophys. Heat Transfer, vol. 13, no. 3, pp. 314–320, 1999. DOI: https://doi.org/10.2514/2.6461.
- Y. F. Maydanik, “Loop heat pipes,” Appl. Therm. Eng., vol. 25, no. 5–6, pp. 635–657, 2005. DOI: https://doi.org/10.1016/j.applthermaleng.2004.07.010.
- R. R. Riehl and T. Dutra, “Development of an experimental loop heat pipe for application in future space missions,” Appl. Therm. Eng., vol. 25, no. 1, pp. 101–112, 2005. DOI: https://doi.org/10.1016/j.applthermaleng.2004.05.010.
- S. Launay, V. Sartre, and J. Bonjour, “Parametric analysis of loop heat pipe operation: A literature review,” Int. J. Therm. Sci., vol. 46, no. 7, pp. 621–636, 2007. DOI: https://doi.org/10.1016/j.ijthermalsci.2006.11.007.
- R. Singh, A. Akbarzadeh, C. Dixon, M. Mochizuki, and R. R. Riehl, “Miniature loop heat pipe with flat evaporator for cooling computer CPU,” IEEE Trans. Compon. Packag. Technol., vol. 28, no. 1, pp. 42–49, 2007. DOI: https://doi.org/10.1109/TCAPT.2007.892066.
- A. A. Adoni, A. Ambirajan, V. S. Jasvanth, D. Kumar, and P. Dutta, “Theoretical and experimental studies on an ammonia-based loop heat pipe with a flat evaporator,” IEEE Trans. Compon. Packag. Technol., vol. 33, no. 2, pp. 478–487, 2010. DOI: https://doi.org/10.1109/TCAPT.2010.2042056.
- Y. Tang, J. Xiang, Z. Wan, W. Zhou, and L. Wu, “A novel miniaturized loop heat pipe,” Appl. Therm. Eng., vol. 30, no. 10, pp. 1152–1158, 2010. DOI: https://doi.org/10.1016/j.applthermaleng.2010.01.030.
- R. Singh, A. Akbarzadeh, and M. Mochizuki, “Thermal potential of flat evaporator miniature loop heat pipes for notebook cooling,” IEEE Trans. Compon. Packag. Technol., vol. 33, no. 1, pp. 32–45, 2010. DOI: https://doi.org/10.1109/TCAPT.2009.2031875.
- Y. F. Maydanik, S. V. Vershinin, V. G. Pastukhov, and S. Fried, “Loop heat pipes for cooling systems of servers,” IEEE Trans. Compon. Packag. Technol., vol. 33, no. 2, pp. 416–423, 2010. DOI: https://doi.org/10.1109/TCAPT.2009.2035514.
- G. P. Celata, M. Cumo, and M. Furrer, “Experimental tests of a stainless steel loop heat pipe with flat evaporator,” Exp. Therm. Fluid Sci., vol. 34, no. 7, pp. 866–878, 2010. DOI: https://doi.org/10.1016/j.expthermflusci.2010.02.001.
- X. H. Nguyen, et al., “Study on heat transfer performance for loop heat pipe with circular flat evaporator,” Int. J. Heat Mass Transfer, vol. 55, no. 4, pp. 1304–1315, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2011.09.010.
- Z. Liu, H. Li, B. Chen, J. Yang, and W. Liu, “Operational characteristics of flat type loop heat pipe with biporous wick,” Int. J. Therm. Sci., vol. 58, pp. 180–185, 2012. DOI: https://doi.org/10.1016/j.ijthermalsci.2012.02.027.
- Y. F. Maydanik, M. A. Chernysheva, and V. G. Pastukhov, “Loop heat pipes with flat evaporators,” Appl. Therm. Eng., vol. 67, no. 1–2, pp. 294–307, 2014. DOI: https://doi.org/10.1016/j.applthermaleng.2014.03.041.
- P. P. Montes, D. Mishkins, A. Kulakov, A. Torres, and I. P. Grande, “Effects of non-condensable gas in an ammonia loop heat pipe operating up to 125°C,” Appl. Therm. Eng., vol. 66, pp. 474–484, 2014. DOI: https://doi.org/10.1016/j.applthermaleng.2014.02.017.
- L. Bai, G. Lin, H. Zhang, and D. S. Wen, “Effect of evaporator tilt on the operating temperature of a loop heat pipe without a secondary wick,” Int. J. Heat Mass Transfer, vol. 77, pp. 600–603, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.05.044.
- S. C. Wu, T. W. Gu, D. Wang, and Y. M. Chen, “Study of PTFE wick structure applied to loop heat pipe,” Appl. Therm. Eng., vol. 81, pp. 51–57, 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2015.01.048.
- Y. Qu, K. Zhou, K. F. Zhang, and Y. Tian, “Effects of multiple sintering parameters on the thermal performance of bi-porous nickel wicks in loop heat pipes,” Int. J. Heat Mass Transfer, vol. 99, pp. 638–646, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.04.005.
- K. Nakamura, K. Odagiri, and H. Nagano, “Study on a loop heat pipe for a long-distance heat transport under ant-gravity condition,” Appl. Therm. Eng., vol. 107, pp. 167–174, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.06.162.
- T. Tharayil, L. G. Asirvatham, V. Ravindran, and S. Wongwises, “Effect of filling ratio on the performance of a novel miniature loop heat pipe having different diameter transport lines,” Appl. Therm. Eng., vol. 106, pp. 588–600, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.05.125.
- Y. Zhao, S. Chang, W. Zhang, and B. Yang, “Experimental research on thermal characteristics of loop heat pipe with liquid guiding holes,” Appl. Therm. Eng., vol. 101, pp. 231–238, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.02.106.
- G. Zhou and J. Li, “Two phase flow characteristics of a high performance loop heat pipe with flat evaporator under gravity,” Int. J. Heat Mass Transfer, vol. 117, pp. 1063–1074, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.074.
- J. Xu, X. Ji, W. Yang, and Z. Zhao, “Modulated porous wick evaporator for loop heat pipes,” Int. J. Heat Mass Transfer, vol. 72, pp. 163–176, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.01.005.
- M. A. Chernysheva, S. I. Yushakova, and Y. F. Maydanik, “Effect of external factors on the operating characteristics of a copper -water loop heat pipe,” Int. J. Heat Mass Transfer, vol. 81, pp. 297–304, 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.037.
- V. S. Jasvanth, A. A. Adoni, V. Jaikumar, and A. Ambirajan, “Design and testing of an ammonia loop heat pipe,” Appl. Therm. Eng., vol. 111, pp. 1655–1663, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.07.106.
- S. Hong, S. Wang, and Z. Zhang, “Multiple orientations research on heat transfer performances of Ultra-thin loop heat pipes with different evaporator structures,” Int. J. Heat Mass Transfer, vol. 98, pp. 415–425, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.049.
- W. Zhou, W. Ling, L. Duan, K. S. Hui, and K. N. Hui, “Development and tests of loop heat pipe with multi-layer metal foams as wick structure,” Appl. Therm. Eng., vol. 94, pp. 324–330, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2015.10.085.
- T. Tharayil, L. G. Asirvataham, M. J. Dau, and S. Wongwises, “Entropy generation analysis of a miniature loop heat pipe with graphene-water nano fluid,” Int. J. Heat Mass Transfer, vol. 106, pp. 407–421, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.035.
- M. A. Chernysheva and Y. F. Maydanik, “Effect of liquid filtration in a wick on thermal processes in aflat disk-shaped evaporator of a loop heat pipe,” Int. J. Heat Mass Transfer, vol. 106, pp. 222–231, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.10.037.
- A. B. Solomon, et al., “Application of bio-wick in compact loop heat pipe,” Appl. Therm. Eng., vol. 169, pp. 114927, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.114927.
- E. N. Stephen, L. G. Asirvatham, R. Kandasamy, B. Solomon, and G. S. Kondru, “Heat transfer performance of a compact loop heat pipe with alumina and silver nanofluid,” J. Therm. Anal. Calorim., vol. vol.136, pp. 211–222, 2019. DOI: https://doi.org/10.1007/s10973-018-7739-0.
- K. Matsubara, M. Nakakura, S. Bellan, and K. Maezawa, “Loop thermosiphon thermal collector for waste heat recovery power generation,” Exp. Heat Transfer, vol. 32, no. 3, pp. 201–238, 2019. DOI: https://doi.org/10.1080/08916152.2018.1491907.
- T. K. Salem, F. S. Khosroshahi, M. Arık, M. O. Hamdan, and M. Budakli, “Numerical and experimental analysis of a heat-pipe-embedded printed circuit board for solid state lighting applications,” Exp. Heat Transfer, vol. 32, no. 1, pp. 1–13, 2019. DOI: https://doi.org/10.1080/08916152.2017.1397818.
- Y. H. Diao, S. Wang, C. Z. Li, Y. H. Zhao, and T. T. Zhu, “Experimental study on the heat-transfer characteristics of a new-type flat micro-heat-pipe heat exchanger with latent heat thermal energy storage,” Exp. Heat Transfer, vol. 30, no. 2, pp. 91–111, 2017. DOI: https://doi.org/10.1080/08916152.2016.1179355.
- S. M. Peyghambarzadeha, M. R. Bohloulb, and N. Aslanzadeha, “Heat transfer and Marangoni flow in a circular heat pipe using self-rewetting fluids,” Exp. Heat Transfer, vol. 30, no. 3, pp. 218–234, 2017. DOI: https://doi.org/10.1080/08916152.2016.1233148.
- D. Reay and P. Kew, Heat Pipes Theory, Design and Applications, 5th ed. WB, UK Butterworth-Heinemann Publications, Burlington, USA, 2006.
- B. Zohuri, Heat Pipe Design and Technology. Boca Raton, London, NY: CRC press, Taylor and Francis group, 2011.
- A. B. Solomon, et al., “Characterisation of a grooved heat pipe with an anodized surface,” Heat Mass Transfer, vol. 53, pp. 753–763, 2017. DOI: https://doi.org/10.1007/s00231-016-1856-8.