References
- A. K. Raul, P. Bhavsar, and S. K. Saha, “Experimental study on discharging performance of vertical multitube shell and tube latent heat thermal energy storage,” J. Storage Mater., vol. 20, pp. 279–288, 2018. DOI:https://doi.org/10.1016/j.est.2018.09.022.
- A. Dinker, M. Agarwal, and G. D. Agarwal, “Experimental thermal performance study of natural graphite as sensible heat storage material using different heat transfer fluids,” Exp. Heat Transfer, vol. 31, pp. 219–231, 2018. DOI:https://doi.org/10.1080/08916152.2017.1405101.
- A. Gautam and R. P. Saini, “A review on technical, applications and economic aspect of packed bed solar thermal energy storage system,” J. Storage Mater., vol. 27, pp. 101046, 2020. DOI:https://doi.org/10.1016/j.est.2019.101046.
- A. Laaouatni, et al., “Thermal building control using active ventilated block integrating phase change material,” Energy Build., vol. 187, pp. 50–63, 2019. DOI:https://doi.org/10.1016/j.enbuild.2019.01.024.
- F. M. Rad and A. S. Fung, “Solar community heating and cooling system with borehole thermal energy storage - Review of systems,” Renew. Sust. Energ. Rev., vol. 60, pp. 1550–1561, 2016. DOI:https://doi.org/10.1016/j.rser.2016.03.025.
- H. H. Öztürk, “Experimental evaluation of energy and exergy efficiency of a seasonal latent heat storage system for greenhouse heating,” Energy Convers. Manage., vol. 46, pp. 1523–1542, 2005. DOI:https://doi.org/10.1016/j.enconman.2004.07.001.
- J. Lizana, R. Chacartegui, A. Barrios-Padura, and J. M. Valverde, “Advances in thermal energy storage materials and their applications towards zero energy buildings: A critical review,” Appl. Energy, vol. 203, pp. 219–239, 2017. DOI:https://doi.org/10.1016/j.apenergy.2017.06.008.
- L. Miró, J. Gasia, and L. F. Cabeza, “Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review,” Appl. Energy, vol. 179, pp. 284–301, 2016. DOI:https://doi.org/10.1016/j.apenergy.2016.06.147.
- C. Yadav and R. R. Sahoo, “Effect of nano-enhanced PCM on the thermal performance of a designed cylindrical thermal energy storage system,” Exp. Heat Transfer, pp. 1–20, 2020. DOI: https://doi.org/10.1080/08916152.2020.1751744.
- M. S. Mahdi, et al., “Experimental investigation of the thermal performance of a helical coil latent heat thermal energy storage for solar energy applications,” Therm. Sci. Eng. Prog., vol. 10, pp. 287–298, 2019. DOI:https://doi.org/10.1016/j.tsep.2019.02.010.
- Y. H. Diao, S. Wang, C. Z. Li, Y. H. Zhao, and T. T. Zhu, “Experimental study on the heat transfer characteristics of a new type flat micro heat pipe heat exchanger with latent heat thermal energy storage,” Exp. Heat Transfer, vol. 30, pp. 91–111, 2017. DOI:https://doi.org/10.1080/08916152.2016.1179355.
- C. Suresh and R. P. Saini, “Review on solar thermal energy storage technologies and their geometrical configurations,” Int. J. Energy Res., pp. 1–33, 2020. DOI: https://doi.org/10.1002/er.
- A. Yataǧanbaba and I. Kurtbaş, “Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams,” Exp. Heat Transfer, vol. 29, pp. 355–377, 2016. DOI:https://doi.org/10.1080/08916152.2014.989376.
- C. Suresh and R. P. Saini, “Thermal performance of sensible and latent heat thermal energy storage systems,” Int. J. Energy Res., pp. 1–16, 2020. DOI: https://doi.org/10.1002/er.5255.
- T. Kousksou, P. Bruel, A. Jamil, T. El Rhafiki, and Y. Zeraouli, “Energy storage: applications and challenges,” Sol. Energy Mater. Sol. Cells, vol. 120, pp. 59–80, 2014. DOI:https://doi.org/10.1016/j.solmat.2013.08.015.
- A. Elouali, et al., “Physical models for packed bed: sensible heat storage systems,” J. Storage Mater., vol. 23, pp. 69–78, 2019. DOI:https://doi.org/10.1016/j.est.2019.03.004.
- N. Hoivik, et al., “Long-term performance results of concrete-based modular thermal energy storage system,” J. Storage Mater., vol. 24, pp. 100735, 2019. DOI:https://doi.org/10.1016/j.est.2019.04.009.
- M. M. S. Al-azawii, C. Theade, P. Bueno, and R. Anderson, “Experimental study of layered thermal energy storage in an air-alumina packed bed using axial pipe injections,” Appl. Energy, vol. 249, pp. 409–422, 2019. DOI:https://doi.org/10.1016/j.apenergy.2019.04.111.
- R. Lugolole, et al., “Experimental analyses of sensible heat thermal energy storage systems during discharging,” Sustainable Energy Technol. Assess., vol. 35, pp. 117–130, 2019. DOI:https://doi.org/10.1016/j.seta.2019.06.007.
- S. Wang, A. Faghri, and T. L. Bergman, “A comparison study of sensible and latent thermal energy storage systems for concentrating solar power applications,” Numer. Heat Transf. Part A Appl., vol. 7782, 2012. DOI: https://doi.org/10.1080/10407782.2012.672887.
- H. Agrawal, V. Yadav, and Y. Kumar, “Comparison of experimental data for sensible and latent heat storage materials for late-evening cooking based on a dish-type,” Int. J. Energy Clean Environ., vol. 15, pp. 47–72, 2014. DOI: https://doi.org/10.1615/InterJEnerCleanEnv.2015013791.
- C. R. C. Rao, K. Vigneshwaran, H. Niyas, and P. Muthukumar, “Performance investigation of lab-scale sensible heat storage prototypes,” Int. J. Green Energy, vol. 16, pp. 1–16, 2019. DOI:https://doi.org/10.1080/15435075.2019.1671411.
- K. Vigneshwaran, G. S. Sodhi, P. Muthukumar, A. Guha, and S. Senthilmurugan, “Experimental and numerical investigations on high temperature cast steel based sensible heat storage system,” Appl. Energy, vol. 251, pp. 113322, 2019. DOI:https://doi.org/10.1016/j.apenergy.2019.113322.
- M. Wu, M. Li, C. Xu, Y. He, and W. Tao, “The impact of concrete structure on the thermal performance of the dual-media thermocline thermal storage tank using concrete as the solid medium,” Appl. Energy, vol. 113, pp. 1363–1371, 2014. DOI:https://doi.org/10.1016/j.apenergy.2013.08.044.
- A. Gautam and R. P. Saini, “Experimental investigation of heat transfer and fluid flow behavior of packed bed solar thermal energy storage system having spheres as packing element with pores,” Sol. Energy, vol. 204, pp. 530–541, 2020. DOI:https://doi.org/10.1016/j.solener.2020.05.024.
- B. R. Nandi, S. Bandyopadhyay, and R. Banerjee, “Analysis of high temperature thermal energy storage for solar power plant,” IEEE Int. Conf. Sustainable Energy Technol., ICSET, vol. 5, pp. 438–444, 2012. DOI:https://doi.org/10.1109/ICSET.2012.6357438.
- F. Felizardo, L. Guerreiro, M. Roig-Flores, M. C. Alonso, and M. Collares-Pereira, “Compatibility tests between high temperature concrete and molten salts to be used for a thermal energy storage,” SOLARPACES 2018 Int. Conf. Concentrat. Sol. Power Chem. Energy Sys., vol. 2126, pp. 200019, 2019. DOI:https://doi.org/10.1063/1.5117734.
- H. Singh, R. P. Saini, and J. S. Saini, “Performance of a packed bed solar energy storage system having large sized elements with low void fraction,” Sol. Energy, vol. 87, pp. 22–34, 2013. DOI:https://doi.org/10.1016/j.solener.2012.10.004.
- A. Gautam and R. P. Saini, “Thermal and hydraulic characteristics of packed bed solar energy storage system having spheres as packing element with pores,” J. Storage Mater., vol. 30, pp. 101414, 2020. DOI:https://doi.org/10.1016/j.est.2020.101414.
- Y. Fang, et al., “Experimental study of storage capacity and discharging rate of latent heat thermal energy storage units,” Appl. Energy, vol. 275, pp. 115325, 2020. DOI:https://doi.org/10.1016/j.apenergy.2020.115325.
- M. Fadl and P. C. Eames, “An experimental investigation of the heat transfer and energy storage characteristics of a compact latent heat thermal energy storage system for domestic hot water applications,” Energy, vol. 188, pp. 116083, 2019. DOI:https://doi.org/10.1016/j.energy.2019.116083.
- M. K. Rathod and J. Banerjee, “Experimental investigations on latent heat storage unit using paraffin wax as phase change material,” Exp. Heat Transfer, vol. 27, pp. 40–55, 2014. DOI:https://doi.org/10.1080/08916152.2012.719065.
- Y. Gao, et al., “Thermal performance analysis of sensible and latent heat thermal energy storage tanks: A contrastive experiment,” J. Build. Eng., pp. 101713, 2020. DOI: https://doi.org/10.1016/j.jobe.2020.101713.
- X. Yang and Z. Cai, “An analysis of a packed bed thermal energy storage system using sensible heat and phase change materials,” Int. J. Heat Mass Transf., vol. 144, pp. 118651, 2019. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2019.118651.
- V. Pandiyarajan, M. Chinna Pandian, E. Malan, R. Velraj, and R. V. Seeniraj, “Experimental investigation on heat recovery from diesel engine exhaust using finned shell and tube heat exchanger and thermal storage system,” Appl. Energy, vol. 88, pp. 77–87, 2011. DOI:https://doi.org/10.1016/j.apenergy.2010.07.023.
- N. Nallusamy, S. Sampath, and R. Velraj, “Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources,” Renewable Energy, vol. 32, pp. 1206–1227, 2007. DOI:https://doi.org/10.1016/j.renene.2006.04.015.
- M. Avci and M. Y. Yazici, “Experimental study of thermal energy storage characteristics of a paraffin in a horizontal tube-in-shell storage unit,” Energy Convers. Manage., vol. 73, pp. 271–277, 2013. DOI:https://doi.org/10.1016/j.enconman.2013.04.030.
- G. S. Warkhade, A. V. Babu, S. Mane, and K. Ganesh Babu, “Experimental investigation of sensible thermal energy storage in small sized, different shaped concrete material packed bed,” World J. Eng., vol. 13, pp. 386–393, 2016. DOI:https://doi.org/10.1108/WJE-08-2016-0048.
- A. Buscemi, D. Panno, G. Ciulla, M. Beccali, and V. Lo Brano, “Concrete thermal energy storage for linear fresnel collectors: exploiting the South Mediterranean’s solar potential for agri-food processes,” Energy Convers. Manage., vol. 166, pp. 719–734, 2018. DOI:https://doi.org/10.1016/j.enconman.2018.04.075.
- A. B. Shobo and A. Mawire, “Experimental comparison of the thermal performances of acetanilide, meso-erythritol and an In-Sn alloy in similar spherical capsules,” Appl. Therm. Eng., vol. 124, pp. 871–882, 2017. DOI:https://doi.org/10.1016/j.applthermaleng.2017.06.091.
- H. Niyas, S. Prasad, and P. Muthukumar, “Performance investigation of a lab–scale latent heat storage prototype–Numerical results,” Energy Convers. Manage., vol. 135, pp. 188–199, 2017. DOI: https://doi.org/10.1016/j.enconman.2016.12.075.
- J. S. Kline and F. A. McClintock, “Describing uncertainties in single-sample experiments,” Mech. Eng., pp. 3–8, 1953. DOI: https://doi.org/10.1111/jcmm.13453.