References
- M. O. Tarhan, Catalytic Reactor Design. N.Y: McGraw-Hill Companies, 1983.
- S. Vashisth, V. Kumar, and K. D. Nigam, “A review on the potential applications of curved geometries in process industry,” Ind Eng Chem Res, vol. 47, pp. 3291–3337, 2008. DOI: https://doi.org/10.1021/ie701760h.
- M. H. Abdel-Aziz, I. A. S. Mansour, and G. H. Sedahmed, “Study of the rate of liquid–solid mass transfer controlled processes in helical tubes under turbulent flow conditions,” Chem. Eng. Process, vol. 49, pp. 643–648, 2010. DOI: https://doi.org/10.1016/j.cep.2009.06.004.
- J. R. Selman and C. W. Tobias, “Mass-transfer measurements by the limiting-current technique,” Adv. Chem. Eng., vol. 10, pp. 211–318, 1978.
- M. A. El-Naggar, et al., “Intensification of the rate of diffusion-controlled electrochemical and catalytic reactions at a helical coil by a fixed bed turbulence promoter,” Chem. Biochem. Eng. Q., vol. 32, pp. 307–313, 2018. DOI: https://doi.org/10.15255/CABEQ.2018.1299.
- Z. Anxionnaz, M. Cabassud, C. Gourdon, and P. Tochon, “Heat exchanger/reactors (HEX reactors): concepts, technologies: state-of-the-art,” Chem. Eng. Process, vol. 47, pp. 2029–2050, 2008. DOI: https://doi.org/10.1016/j.cep.2008.06.012.
- F. M. Dautzenberg and M. Mukherjee, “Process intensification using multifunctional reactors,” Chem Eng Sci, vol. 56, pp. 251–267, 2001. DOI: https://doi.org/10.1016/S0009-2509(00)00228-1.
- G. H. Sedahmed, Y. A. El-Taweel, A. H. Konsowa, and M. H. Abdel-Aziz, “Effect of packing geometry on the rate of mass and heat transfer at a vertical tube imbedded in fixed bed under single and two phase flow,” Int. Commu. Heat Mass Transfer, vol. 48, pp. 149–154, 2013. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2013.08.002.
- G. H. Sedahmed, Y. A. El-Taweel, A. H. Konsowa, and M. H. Abdel-Aziz, “Mass transfer intensification in an annular electrochemical reactor by an inert fixed bed under various hydrodynamic conditions,” Chem. Eng. Process, vol. 50, pp. 1122–1127, 2011. DOI: https://doi.org/10.1016/j.cep.2011.10.002.
- J. R. Welty, C. E. Wicks, R. E. Wilson, and G. L. Rorrer, Fundamentals of Momentum, Heat, and Mass Transfer. John Wiley and Sons, Inc, New Jersey, 2008.
- G. H. Sedahmed, “A model for correlating mass transfer data in parallel plate gas sparged electrochemical reactors,” J. Appl. Electrochem., vol. 15, pp. 777–780, 1985. DOI: https://doi.org/10.1007/BF00620576.
- W. D. Deckwer, “On the mechanism of heat transfer in bubble column reactors,” Chem Eng Sci, vol. 35, pp. 1341–1346, 1980. DOI: https://doi.org/10.1016/0009-2509(80)85127-X.
- M. M. Taha., S. A. Nosier, M. H. Abdel-Aziz, and M. A. El-Naggar, “Solid-liquid mass transfer in a bubble column reactor with tube bank internals,” Exp. Heat Transfer, pp. 1–13, 2020. DOI: https://doi.org/10.1080/08916152.2020.1776420.
- H. Q. Lv, et al., “Investigation on heat transfer performance of corrugated tubes in low-temperature multi-effect falling film evaporation,” Exp. Heat Transfer, pp. 1–15, 2020. DOI: https://doi.org/10.1080/08916152.2020.1713257.
- K. C. Mangrulkar, et al., “Thermal performance escalation of cross flow heat exchanger using in-line elliptical tubes,” Exp. Heat Transfer, pp. 1–26, 2019. DOI: https://doi.org/10.1080/08916152.2019.1704946.
- D. Panahi, “Evaluation of Nusselt number and effectiveness for a vertical shell-coiled tube heat exchanger with air bubble injection into shell side,” Exp. Heat Transfer, vol. 30, pp. 179–191, 2017. DOI: https://doi.org/10.1080/08916152.2016.1233145.
- M. H. Abdel-Aziz, I. Nirdosh, and G. H. Sedahmed, “Liquid–solid mass and heat transfer behavior of a concentric tube airlift reactor,” Int. J. Heat Mass Transf, vol. 58, pp. 735–739, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.11.054.
- C. Yadav and R. R. Sahoo, “Effect of nano-enhanced PCM on the thermal performance of a designed cylindrical thermal energy storage system,” Exp. Heat Transfer, pp. 1–20, 2020. DOI: https://doi.org/10.1080/08916152.2020.1751744.
- E.-S. Z. El-Ashtoukhy, M. H. Abdel-Aziz, and G. H. Sedahmed, “Mass transfer inside spiral coils under laminar flow and possible applications,” Exp. Heat Transfer, pp. 1–11, 2020. DOI: https://doi.org/10.1080/08916152.2020.1739782.
- M. Mihailović, et al., “Air side heat transfer coefficient in plate finned tube heat exchangers,” Exp. Heat Transfer, vol. 33, pp. 388–399, 2019. DOI: https://doi.org/10.1080/08916152.2019.1656298.
- D. J. Nicklin, “Two-phase bubble flow,” Chem Eng Sci, vol. 17, pp. 693–702, 1962. DOI: https://doi.org/10.1016/0009-2509(62)85027-1.
- M. Abraham and S. B. Sawant, “Hydrodynamics and mass transfer characteristics of packed bubble columns,” Chem. Eng. J., vol. 43, pp. 95–105, 1990. DOI: https://doi.org/10.1016/0300-9467(90)80011-Z.
- J. G. G. Maldonado, D. Bastoul, S. Baig, M. Roustan, and G. Hébrard, “Effect of solid characteristics on hydrodynamic and mass transfer in a fixed bed reactor operating in co-current gas–liquid up flow,” Chem. Eng. Process, vol. 47, pp. 1190–1200, 2008. DOI: https://doi.org/10.1016/j.cep.2007.02.013.
- T. B. Zhukova, “Modeling and design of industrial reactors with a stationary bed of catalyst and two phase gas-liquid flow-a review,” Int. Chem. Eng., vol. 30, pp. 57–102, 1990.
- J. B. Joshi, V. G. Pangarkar, S. D. Gharat, and S. V. Jadhava, “Heat and mass transfer in multiphase reactors,” in Handbook of Heat and Mass Transfer, Vol. 4, edited by N. P. Cheremisinoff, Gulf Publishing Co., London, 1990.
- L. Sigrist, O. Dossenbach, and N. Ibl, “Mass transport in electrolytic cells with gas sparging,” Int. J. Heat Mass Transf, vol. 22, pp. 1393–1399, 1979. DOI: https://doi.org/10.1016/0017-9310(79)90201-1.
- E. Adam, J. Venczel, and E. Schalch, “Stofftransport bei der Elektrolyse mit Gasrührung,” Chemie Ingenieur Technik, vol. 43, pp. 202–215, 1971. DOI: https://doi.org/10.1002/cite.330430418.
- J. R. Fair, “Designing gas-sparged reactors,” Chem. Eng., vol. 74, pp. 67–74, 1967.
- Y. T. Shah, “Design parameters for mechanically agitated reactors,” Adv. Chem. Eng., vol. 17, pp. 1–206, 1992.
- A. A. Harraz, et al., “Liquid–solid mass transfer behaviour of a fixed bed airlift reactor,” Biochem. Eng. J., vol. 103, pp. 1–11, 2015. DOI: https://doi.org/10.1016/j.bej.2015.06.011.
- S. A. Noseir, A. El-Kayar, H. A. Farag, and G. H. Sedahmed, “Solid-liquid mass transfer at gas sparged fixed bed of Rasching rings,” Int. Commu. Heat Mass Transfer, vol. 24, pp. 733–740, 1997. DOI: https://doi.org/10.1016/S0735-1933(97)00058-4.
- M. A. Zarraa, M. Z. El-Abd, Y. A. El-Tawil, H. A. Farag, and G. H. Sedahmed, “Liquid-solid mass transfer in a batch-packed bubble column,” Chem. Eng. J. Biochem. Eng. J., vol. 54, pp. 51–56, 1994. DOI: https://doi.org/10.1016/0923-0467(93)02812-B.