References
- J. R. Thome and J. Kim. Encyclopedia of Two-Phase Heat Transfer and Flow, Vol. II, Singapore:World Scientific Publishing Company, 2015.
- F. Ziegler, “Relationships between temperature differences in heat exchangers of heat transformation devices,” Rev. Gen. Therm., vol. 37, no. 7, pp.549–555, 1998. DOI: https://doi.org/10.1016/S0035-3159(98)80033-0.
- T. Gambaryan-Roisman and P. Stephan, “Interface dynamics and heat transfer in evaporating liquid films on microstructured surfaces,” IHTC, vol. 13, 2006.
- G. Longo, A. Gasparella, and R. Sartori, “Experimental heat transfer coefficients during refrigerant vaporisation and condensation inside herringbone-type plate heat exchangers with enhanced surfaces,” Int. J. Heat Mass Tran., vol. 47, no. 19–20, pp.4125–4136, 2004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.001.
- D. Orejon, et al., “Simultaneous dropwise and filmwise condensation on hydrophilic microstructured surfaces,” Int. J. Heat Mass Tran., vol. 114, pp. 187–197, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.023.
- D. M. Attalla and H. M. Maghrabie, “An experimental study on heat transfer and fluid flow of rough plate heat exchanger using Al2O3/water nanofluid,” Exp. Heat Trans., vol. 33, no. 3, pp.261–281, 2020. DOI: https://doi.org/10.1080/08916152.2019.1625469.
- K. Tamura, et al., “Development of high heat transfer titanium sheet for heat exchanger”, Proc 13th World Conf. Titanium, The Minerals, Metals & Materials Society, San Diego, California, 2016.
- A. Gabler, et al., “Ultrashort-pulse laser structured titanium surfaces with sputter-coated platinum catalyst as hydrogen evolution electrodes for alkaline water electrolysis,” Int. J. Hydrogen Energy., vol. 43, no. 15, pp.7216–7226, 2018. DOI: https://doi.org/10.1016/j.ijhydene.2018.02.130.
- M. Koj, T. Gimpel, W. Schade, and T. Turek, “Laser structured nickel-iron electrodes for oxy-gen evolution in alkaline water electrolysis,” Int. J. Hydrogen Energy., vol. 44, pp. 12671–12684, 2019.
- B. K. Nayak and M. C. Gupta, “Self-organized micro/nano structures in metal surfaces by ultrafast laser irradiation,” Opt. Laser Eng., vol. 48, no. 10, pp.940–949, 2010. DOI: https://doi.org/10.1016/j.optlaseng.2010.04.010.
- T. Rauscher, et al., “Femtosecond-laser structuring of Ni electrodes for highly active hydrogen evolution,” Electrochim. Acta, vol. 247, pp. 1130–1139, 2017. DOI: https://doi.org/10.1016/j.electacta.2017.07.074.
- D. Huerta-Murillo, et al., “Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy,” Appl. Surf. Sci., vol. 463, pp. 838–846, 2019. DOI: https://doi.org/10.1016/j.apsusc.2018.09.012.
- V. Solotych, D. Lee, J. Kim, R. L. Amalfi, and J. R. Thome, “Boiling heat transfer and two phase flow pressure drops within compact plate heat exchangers: experiments and flow visualisation,” Int. J. Heat Mass Tran., vol. 94, pp. 239–253, 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.037.
- NIST, “The US national institute of standards and technology, refrigerant properties computer code,” REFPROP 9.1.
- H. Martin, “N6 Pressure Drop and Heat Transfer in Plate Heat Exchangers,” in VDI Heat Atlas, Berlin Heidelberg: Springer-Verlag, pp. 1515–1522, 2010. DOI: https://doi.org/10.1007/978-3-540-77877-6_109.
- V. Grabenstein Experimentelle Untersuchung und Modellierung der Kondensation in Plattenwärmeübertragern“, Doctoral dissertation, Leibniz University Hannover, Germany, 2014.
- J. Zhang, X. Zhu, M. Mondejar, and F. Haglind, “A review of heat transfer enhancement techniques in plate heat exchangers,” Renew. Sust. Energ. Rev., vol. 101, pp. 305–328, 2019. DOI: https://doi.org/10.1016/j.rser.2018.11.017.
- R. L. Amalfi, F. Vakili- Farahani, and J. R. Thome, “Flow boiling and frictional pressure gradients in plate heat exchangers. Part 2: comparison of literature methods to database and new prediction methods,” Int. J. Refrig., vol. 61, pp. 185–203, 2016. DOI: https://doi.org/10.1016/j.ijrefrig.2015.07.009.
- R. L. Amalfi, F. Vakili- Farahani, and J. R. Thome, “Flow boiling and frictional pressure gradients in plate heat exchangers. Part 1: review and experimental database,” Int. J. Refrig., vol. 61, pp. 166–184, 2016.
- R. Bogaert and A. Bölcs, “Global performance of a prototype brazed plate heat exchanger in a large Reynolds number range,” Exp. Heat Trans, vol. 8, no. 4, pp.293–311, 1995. DOI: https://doi.org/10.1080/08916159508946508.
- V. Grabenstein, A.-E. Polzin, and S. Kabelac, “Experimental investigation of the flow pattern, pressure drop and void fraction of two-phase flow in the corrugated gap of a plate heat exchanger,” Int. J. Multiphase Flow, vol. 91, pp. 155–169, 2017. DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2017.01.012.
- J. Huang. “Performance Analysis of plate heat exchangers used as refrigerant evaporators”, Doctoral dissertation, University of the Witwatersrand Johannesburg, South Africa, 2010.
- S. Kakac and K. Liu, Heat Exchangers Selection, Rating and Thermal Design. BocaRaton: CRC Press, 1998.