References
- S. A. Montzka, et al. “Recent trends in global emissions of hydrochlorofluorocarbons and hydrofluorocarbons: reflecting on the 2007 adjustments to the montreal protocol,” J. Phys. Chem. A, vol. 119, no. 19, pp. 4439–4449, 2015. DOI: https://doi.org/10.1021/jp5097376.
- Z. Zhang, et al. “Analysis on the influence of Kigali Amendment to Montreal Protocol to refrigeration and air-conditioning industry,” Refrig. Air-Cond., vol. 17, no. 1, pp. 1–7, 2017.
- American Society of Heating, Refrigerating and Air-Conditioning Engineers, ASHRAE Handbook: Refrigerants. ASHRAE, 2015
- H. Pham and R. Rajendran, “R32 and HFOs as low-GWP refrigerants for air conditioning,” Int. Refrig. Air Cond. Conference, Purdue University, Jul 16-19, 2012.
- Y. Heredia-Aricapaa, J. M. Belman-Flores, A. Mota-Babiloni b, J. Serrano-Arellanoc and Juan J. García-Pabónd, “Overview of low GWP mixtures for the replacement of HFC refrigerants: r134a, R404A and R410A,” Int. J. Refrig., vol. 111, pp. 113–123, 2020. DOI: https://doi.org/10.1016/j.ijrefrig.2019.11.012.
- A. Giovanni, “Longo, Giulia Righetti, and Claudio Zilio, Heat-transfer assessment of the low GWP substitutes for traditional HFC refrigerants,” Int. J. Heat and Mass Tran., vol. 139, pp. 31–38, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.144.
- Unep 38th Meeting of the Open-ended Working Group (OEWG 38) of the Parties to the Montreal Protocol on Substances that Deplete the Ozone Layer and 28th Meeting of the Parties to the Montreal Protocol (MOP 28) Kigali 8,Oct 10–14, 2016
- E. G. Huo, Y. D. Dai, P. Geng, and M. B. Cao, “Feasibility of using R1234ze and R152a mixture as alternative for R22,” J. Chem. Ind., vol. 12, pp. 4725–4729, 2015.
- L. L. Wang, Y. D. Dai, J. H. Wu, and B. Li, “Experimental investigation on flow boiling heat transfer characteristics of R1234ze(E)/R152a in 6-mm ID horizontal smooth tube,” Exp. Heat Transfer, pp. 1–14, 2020. DOI: https://doi.org/10.1080/08916152.2020.1749191.
- X. Y. Zhang, X. Q. Zhang, Y. Q. Chen, and X. L. Yuan, “Heat transfer characteristics for evaporation of R417A flowing inside horizontal smooth and internally grooved tubes,” Energ. Convers. & Manage., vol. 49, no. 6, pp.1731–1739, 2008. DOI: https://doi.org/10.1016/j.enconman.2007.11.006.
- X. Zou, M. Q. Gong, G. F. Chen, Z. H. Sun, and J. F. Wu, “Experimental study on saturated flow boiling heat transfer of R290/R152a binary mixtures in a horizontal tube,” Front. Energy, vol. 4, pp. 527–534, 2010.
- X. Zou, et al. “Experimental study on saturated flow boiling heat transfer of R170/R290 mixtures in a horizontal tube,” Int. J. Refrig., vol. 33, no. 2, pp. 371–380, 2010. DOI: https://doi.org/10.1016/j.ijrefrig.2009.10.013.
- B. Daisuke, N. Takafumi, and K. Shigeru, “Flow Boiling Heat Transfer and Pressure Drop of R1234ze(E) and R32 in Horizontal Micro-fin tube,” International Refrigeration and Air Conditioning Conference. 2012. doi:https://doi.org/10.1016/j.colsurfb.2012.03.008.
- J. R. Smith. “Cremaschi, and Lorenzo, “Two phase flow boiling heat transfer and pressure drop of two new LGWP developmental refrigerants alternative to R-410A,” International Refrigeration and Air Conditioning Conference, 2014.
- J. Qiu, et al. “Investigation of flow boiling heat transfer characteristic of mixture refrigerant L-41B in a horizontal smooth tube,” Therm. Sci., vol. 22, no. 6B, pp. 2835–2846, 2018. DOI: https://doi.org/10.2298/TSCI180115154Q.
- Q. Guo, L. Minxia, and X. Tian, “Experimental study on flow boiling heat transfer characteristics of R134a, R245fa and R134a/R245fa mixture at high saturation temperatures,” In. J. Therm. Sci., vol. 150, 2020.
- W. R. van Wijk, A. S. Vos, and S. J. D. van Stralen, “Heat transfer to boiling binary liquid mixture,” Chem. Eng. Sci., vol. 5, pp. 68–80, 1956. DOI: https://doi.org/10.1016/0009-2509(56)80020-1.
- L. M X, D. C B, and E. Hihara, “Flow boiling heat transfer of HFO1234yf and R32 refrigerant mixtures in a smooth horizontal tube: part I. Experimental investigation,” Int. J. Heat Mass Trans., vol. 55, pp. 3437–3446, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.002.
- F. Y. LÜ, H. G. Ma, H. B. He, and L. S. Qi, ““Investigation on flow boiling heat transfer of non-azeotropic refrigerant mixture in microchannel,” Chem. Ind. Eng. Prog., vol. 07, pp. 60–64, 2012.
- M. A. Hossain, Y. Onaka, H. M. M. Afroz, and A. Miyara, “Heat transfer during evaporation of R1234ze(E), R32, R410A and a mixture of R1234ze(E) and R32 inside a horizontal smooth tube,” Int. J. Refrig., vol. 36, no. 2, pp.465–477, 2013. DOI: https://doi.org/10.1016/j.ijrefrig.2012.10.009.
- C. Kondou, D. BaBa, F. Mishima, and S. Koyama, “Flow boiling of non-azeotropic mixture R32/R1234ze(E) in horizontal microfin tubes,” Int. J. Refrig., vol. 36, no. 8, pp.2366–2378, 2013. DOI: https://doi.org/10.1016/j.ijrefrig.2013.07.009.
- M. Azzolin, S. Bortolin,and D. Del Col “Flow boiling heat transfer of a zeotropic binary mixture of new refrigerants inside a single microchannel,” Int. J. Therm. Sci., vol. 110, pp. 83–95, 2016. DOI: https://doi.org/10.1016/j.ijthermalsci.2016.06.026.
- Y. Kim, K. Seo, and J. T. Chung, “Evaporation heat transfer characteristics of R-410A in 7 and 9.52 mm smooth/micro-fin tubes,” Int. J. Refrig., vol. 25, no. 6, pp.716–730, 2002. DOI: https://doi.org/10.1016/S0140-7007(01)00070-6.
- D. Jung, Y. Cho, and K. Park, “Flow condensation heat transfer coefficients of R22, R134a, R407C, and R410A inside plain and microfin tubes,” Int. J. Refrig., vol. 27, no. 1, pp.25–32, 2004. DOI: https://doi.org/10.1016/S0140-7007(03)00122-1.
- X. Han, et al. “Evaporation heat transfer and pressure drop of R161 in a 7 mm micro-fin tube,” Int. J. Heat Mass Transf., vol. 62, pp. 638–646, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.03.017.
- J. H. Wu, S. K. Zou, L. L. Wang, and Y. D. Dai, “Condensation heat transfer of R290 in micro-fin tube with inside diameter of 6.3 mm,” Exp. Heat Transf., vol. 34, no. 1, pp. 1–17, 2020. DOI: https://doi.org/10.1080/08916152.2020.1713255.
- S. Z. Rouhani and E. Axelsson, “Calculation of void volume fraction in the subcooled and quality boiling regions,” Int. J. Heat Mass Trans., vol. 13, no. 2, pp.383–393, 1970. DOI: https://doi.org/10.1016/0017-9310(70)90114-6.
- R. J. Moffat, “Describing the uncertainties in experimental results,” Exp. Therm. Fluid Sci., vol. 1, no. 1, pp.3–17, 1988. DOI: https://doi.org/10.1016/0894-1777(88)90043-X.
- G. G. He, F. Liu, D. H. Cai, and J. K. Jiang, “Experimental investigation on flow boiling heat transfer performance of a new near azeotropic refrigerant mixture R290/R32 in horizontal tubes,” Int. J. Heat Mass Transfer, vol. 102, pp. 561–573, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.06.074.
- P. Balachander, B. Raja, and D. M. Lal, “Investigation on boiling heat transfer characteristics of R404A in a 7.49-mm smooth horizontal tube,” Exp. Heat Transfer, vol. 24, no. 4, pp.355–369, 2011. DOI: https://doi.org/10.1080/08916152.2011.556309.