References
- D. Che, Y. Liu, and C. Gao, “Evaluation of retrofitting a conventional natural gas fired boiler into a condensing boiler,” Energy Convers. Manage, vol. 45, no. 20, pp.3251–3266, 2004. DOI: https://doi.org/10.1016/j.enconman.2004.01.004.
- S. Wang, et al., “Heat transfer performance of condensing flue heat exchangers with anticorrosion films,” Heating Ventilation Air Conditioning, vol. 035, pp. 71–74, 2005.
- D. Che, Condensing Boilers and, Systems, Beijing: Machinery Industry Press, 2002.
- D. Yang, S. Wang, X. Ai, and Z. Fu, “Heat and mass transfer of flue gas in entrance region between two parallel plates,” Gas Heat, vol. 022, pp. 19–22, 2002.
- Y. Wu, S. Wang, S. Pan, and Y. Shi, “Experimental study on performance of flue gas condensing heat exchanger with different anticorrosive coatings,” Gas Heat, vol. 30, pp. 62–66, 2010.
- J. Zhang, S. Wang, and S. Pan, Experimental Study on Forced Convective Condensation Heat Transfer of Smoke on Anti-corrosion Coating Surface. Shanghai: HV&AC Chinese Refrigeration Society, 2004, pp. 267–272.
- J. Liu. Condensation Conditions of Flue Gas on the Surface of Anticorrosive Coating Film and Forced Convective Condensation Heat Transfer. Beijing University of Civil Engineering and Architecture, Beijing, 2006.
- M. Liu, S. Wang, and S. Pan, “Experimental research on convective condensation heat transfer of smoke on a new type of composite anticorrosive surface,” Ind. Boiler, vol. 12, pp. 1–6, 2012.
- Y. Pei and Y. He, “Experimental study on the influencing factors of low temperature corrosion of H-type finned tube heat exchangers,” Journal of Xi’an Jiaotong University, vol. 51, pp. 54–61, 2017.
- B. Zhan, Y. Zhu, Y. Chen, and Y. Zhang, “Development of anticorrosion technologies of metallic heat exchangers,” Mater. Rev., vol. 12, pp. 79–82, 2006.
- T. Sugama, R. Webster, W. Reams, and K. Gawlik, “High-performance polymer coatings for carbon steel heat exchanger tubes in geothermal environments,” J. Mater. Sci., vol. 35, no. 9, pp.2145–2154, 2000. DOI: https://doi.org/10.1023/A:1004754204893.
- C. Du, X. Ma, and D. Xu, “A study of heat transfer performances of dropwise condensation on the ultrathin PTFE surfaces,” Chem. Ind. Eng., vol. 4, pp. 192–197, 2000.
- H. Yousen, H. Weitang, and S. Haiming, “An experimental study of steam drop-wise condensation on the FTFE film outside circularly groove tube,” Appl. Sci. Technol., vol. 5, pp. 42–45, 2007.
- P. J. Marto, D. J. Looney, J. W. Rose, and A. S. Wanniarachchi, “Evaluation of organic coatings for the promotion of dropwise condensation of steam,” Int. J. Heat Mass Transfer, vol. 29, no. 8, pp.1109–1117, 1986. DOI: https://doi.org/10.1016/0017-9310(86)90142-0.
- Z. Lan., X. Ma, S. Wang, M. Wang, and X. Li, “Effects of surface free energy and nanostructures on dropwise condensation,” Chem. Eng. J., vol. 156, no. 3, pp.546–552, 2010. DOI: https://doi.org/10.1016/j.cej.2009.04.007.
- H. J. Bart and C. Dreiser, “Polymeric film application for phase change heat transfer,” Heat Mass Transfer, vol. 54, no. 2018, 1729-1739.
- K. Liu, et al., “Self-cleaning porous surfaces for dry condensation,” Applied Materials & Interfaces, vol. 10, no. 31, pp.26759–26764, 2018. DOI: https://doi.org/10.1021/acsami.8b07261.
- D. Y. Dong, C. D. Fu, Z. Z. Ning, L. W. Dong, and F. Sheng, “An experimental study on forced convection-condensation heat transfer of the flue gas with high moisture,” Ind. Boiler, vol. 1, pp. 13–15, 2003.
- M. Xiong, Z. Lin, and X. Liu, “Correlation equation of condensation heat transfer coefficient of steam containing non-condensable gas,” J. Eng. Therm. Energy Power, +79-80, vol. 05, pp. 58–61, 1997.
- Y. Liang, D. Che, and Y. Kang, “Effect of vapor condensation on forced convection heat transfer of moistened gas,” Heat Mass Transfer, vol. 43, no. 7, pp.677–686, 2007. DOI: https://doi.org/10.1007/s00231-006-0148-0.
- P. Tong, G. Fan, Z. Sun, M. Ding, and J. Su, “An experimental investigation of pure steam and steam–air mixtures condensation outside a vertical pin-fin tube,” Exp. Therm. Fluid Sci., vol. 69, pp. 141–148, 2015. DOI: https://doi.org/10.1016/j.expthermflusci.2015.08.009.
- J. D. Li, M. Saraireh, and G. Thorpe, “Condensation of vapor in the presence of non-condensable gas in condensers,” Int. J. Heat Mass Transfer, vol. 54, pp. 4078–4089, 2011. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2011.04.003.
- C. Ma, Y. Ji, H. Chen, and H. Chen, “An experimental study on convective heat transfer performance of steam and air flow in V-shaped rib roughened channels,” Exp. Heat Transfer, vol. 32, no. 1, pp.51–68, 2019. DOI: https://doi.org/10.1080/08916152.2018.1473529.
- M. M. Sarafraz, J. Hart, E. Shrestha, H. Arya, and M. Arjomandi, “Experimental thermal energy assessment of a liquid metal eutectic in a microchannel heat exchanger equipped with a (10 Hz/50 Hz) resonator,” Appl. Therm. Eng., vol. 148, pp. 578–590, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2018.11.073.
- M. M. Sarafraz, M. R. Safaeiet, M. Goodarzi, B. Yang, and M. Arjomandi, “Heat transfer analysis of Ga-In-Sn in a compact heat exchanger equipped with straight micro-passages,” Int. J. Heat Mass Transfer, vol. 139, pp. 675–684, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.057.
- M. M. Sarafraz, H. Arya, and M. Arjomandi, “Thermal and hydraulic analysis of a rectangular microchannel with gallium-copper oxide nano-suspension,” J. Mol. Liq., vol. 263, pp. 382–389, 2018. DOI: https://doi.org/10.1016/j.molliq.2018.05.026.
- M. Mihailović, U. Milovančević, and S. Genić, “Air side heat transfer coefficient in plate finned tube heat exchangers,” Exp. Heat Transfer, vol. 33, no. 4, pp.388–399, 2020. DOI: https://doi.org/10.1080/08916152.2019.1656298.
- S. Caliskan, A. Dogan, and I. Kotcioglu, “Experimental investigation of heat transfer from different pin fin in a rectangular channel,” Exp. Heat Transfer, vol. 32, no. 4, pp.376–392, 2019. DOI: https://doi.org/10.1080/08916152.2018.1526228.
- Q. Zhao and D. Xu, “The dropwise condensation surface with corrosion-resisting property,” Corros. Rev., vol. 11, no. 1–2, pp.98–103, 1993. DOI: https://doi.org/10.1515/CORRREV.1993.11.1-2.97.
- G. A. O’Neill and J. W. Westwater, “Steam condensation on electroplated silver surfaces,” Int. J. Heat Mass Transfer, vol. 27, pp. 1539–1549, 1984. DOI: https://doi.org/10.1016/0017-9310(84)90266-7.
- X. Ma, et al., “Influence of processing conditions of polymer film on dropwise condensation heat transfer,” Int. J. Heat Mass Transfer, vol. 45, no. 16, pp.3405–3411, 2002. DOI: https://doi.org/10.1016/S0017-9310(02)00059-5.
- K. Kim and J. H. Jeong, “Steam condensate behavior and heat transfer performance on chromium-ion-implanted metal surfaces,” Int. J. Heat Mass Transfer, vol. 136, pp. 681–691, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.019.
- S. Vemuri, K. J. Kim, B. D. Wood, S. Govindaraju, and T. W. Bell, “Long term testing for dropwise condensation using self-assembled monolayer coatings of n-octadecyl mercaptan,” Appl. Therm. Eng., vol. 26, no. 4, pp.421–429, 2006. DOI: https://doi.org/10.1016/j.applthermaleng.2005.05.022.
- S. Kline and F. McClintock, “Describing uncertainties in single-sample experiments,” J. Mech. Eng., vol. 75, pp. 3–8, 1953.
- D. Ye, Thermomechanical Testing Technology, Beijing. Machine Industry Press, Beijing, (1981).
- Z. Wang. Thermal Energy and Power Engineering Test Technology. Xi’an: Xi’an Jiaotong University Press, Xi'an, 1988.
- H. Zhang, J. Zou, N. Lin, and B. Tang, “Review on electroless plating Ni-P coatings for improving surface performance of steel,” Surf. Rev. Lett., vol. 21, no. 4, pp.1430002, 2014. DOI: https://doi.org/10.1142/S0218625X14300020.
- Y. Gu, et al., “Condensation heat transfer characteristics of moist air outside 3-D finned tubes with different wettability,” Energy, vol. 207, pp. 118202, 2020. DOI: https://doi.org/10.1016/j.energy.2020.118202.
- Y. H. Gu, Q. Liao, M. Cheng, Y. D. Ding, and X. Zhu, “Condensation heat transfer characteristics of moist air outside a three-dimensional finned tube,” Int. J. Heat Mass Transfer, vol. 158, pp. 119983, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119983.