References
- W. N. Dos Santos, J. N. Dos Santos, P. Mummery, and A. Wallwork, “Thermal diffusivity of polymers by modified angstrom method,” Polym. Test., vol. 29, no. p, pp. 107–112, 2010. DOI: https://doi.org/10.1016/j.polymertesting.2009.09.011.
- W. J. Parker, R. J. Jenkins, C. P. Butler, and G. L. Abbott, “flash method of determining thermal diffusivity, heat capacity, and thermal conductivity,” J. Appl. Phys., vol. 32, no. 9, pp. 1679–1684, 1961. DOI: https://doi.org/10.1063/1.1728417.
- M. K. Alam and B. Maruyama, “thermal conductivity of graphitic carbon foams,” Exp. Heat Transfer, vol. 17, no. no. 3, pp. 227–241, 2004. DOI: https://doi.org/10.1080/08916150490449055.
- T. Matsushita, A. G. Saro, L. Elmquist, and A. E. W. Jarfors, “On the specific heat and thermal diffusivity of CGI and SGI cast irons,” Int. J. Cast. Met. Res., vol. 30, no. no. 5, pp. 276–282, 2017. DOI: https://doi.org/10.1080/13640461.2017.1292987.
- M. Li and M. Akoshima, “Appropriate metallic coating for thermal diffusivity measurement of nonopaque materials with laser flash method and its effect,” Int. J. Heat Mass Transfer, vol. 148, pp. 119017, 2020. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2019.119017.
- I. Jahan et al., “Experimental study on the influence of metal doping on thermophysical properties of porous aluminum fumarate,” Heat Transfer Eng, 2020. DOI: https://doi.org/10.1080/01457632.2020.1777005.
- C. H. Kim, E. B. Go, and H. T. Kim, “Thermophysical properties of zirconia toughened alumina ceramics with boron nitride nanotubes addition,” Heat Transfer Eng, vol. 41, no. 15–16, pp. 1354–1364, 2020. DOI: https://doi.org/10.1080/01457632.2019.1628484.
- S. Moroe et al., “Thermal conductivity measurement of gases by the transient short-hot-wire method,” Exp. Heat Transfer, vol. 24, no. 2, pp. 168–178, 2011. DOI: https://doi.org/10.1080/08916152.2010.503310.
- Y. Jannot and A. Degiovanni, “An improved model for the parallel hot wire: application to thermal conductivity measurement of low density insulating materials at high temperature,” Int. J.Therm. Sci, vol. 142, pp. 379–391, 2019. DOI:https://doi.org/10.1016/j.ijthermalsci.2019.04.026.
- P. G. Bison, E. Grinzato, and S. Marinetti, “Local thermal diffusivity measurement,” Quant. Infrared Thermogr. J., vol. 1, no. 2, pp. 241–250, 2004. DOI: https://doi.org/10.3166/qirt.1.241-250.
- D. C. Knupp, C. P. Naveira-Cotta, H. R. B. Orlande, and R. M. Cotta, “Experimental identification of thermophysical properties in heterogeneous materials with integral transformation of temperature measurements from infrared thermography,” Exp. Heat Transfer, vol. 26, no. 1, pp. 1–25, 2013. DOI: https://doi.org/10.1080/08916152.2011.631079.
- H. M. da Fonseca, H. R. B. Orlande, O. Fudym, and F. Sepúlveda, “A statistical inversion approach for local thermal diffusivity and heat flux simultaneous estimation,” Quant. Infrared Thermogr. J., vol. 11, no. 2, pp. 170–189, 2014. DOI: https://doi.org/10.1080/17686733.2014.947860.
- P. W. Nolte, T. Malvisalo, F. Wagner, and S. Schweizer, “Thermal diffusivity of metals determined by lock-in thermography,” Quant. Infrared Thermogr. J., vol. 14, no. 2, pp. 218–225, 2017. DOI: https://doi.org/10.1080/17686733.2017.1329777.
- G. Guimarães, P. C. Philippi, and P. Thery, “Use of parameters estimation method in the frequency domain for the simultaneous estimation of thermal diffusivity and conductivity,” Rev. Sci. Instrum., vol. 66, no. 3, pp. 2582–2588, 1995. DOI: https://doi.org/10.1063/1.1145592.
- S. M. M. Lima E Silva, M. A. V. Duarte, and G. Guimarães, “A correlation function for thermal properties estimation applied to a large thickness sample with a single surface sensor,” Rev. Sci. Instrum., vol. 69, no. 9, pp. 3290–3297, 1998. DOI: https://doi.org/10.1063/1.1149094.
- V. L. Borges, S. M. M. Lima E Silva, and G. Guimarães, “A dynamic thermal identification method applied to conductor and nonconductor materials,” Inverse Probl. Sci. Eng, vol. 14, no. 5, pp. 511–527, 2006. DOI: https://doi.org/10.1080/17415970600573700.
- P. F. B. Sousa, S. R. Carvalho, and G. Guimarães, “Dynamic observers based on green’s functions applied to 3D inverse thermal models,” Inverse Probl. Sci. Eng, vol. 16, no. 6, pp. 743–761, 2008. DOI: https://doi.org/10.1080/17415970802082765.
- V. L. Borges, P. F. B. Sousa, and G. Guimarães, “Experimental determination of thermal conductivity and diffusivity using a partially heated surface method without heat flux transducer,” Inverse Probl. Sci. Eng, vol. 16, no. 8, pp. 1047–1067, 2008. DOI: https://doi.org/10.1080/17415970802166659.
- V. C. Mariani and L. S. Coelho, “Estimation of the apparent thermal diffusivity coefficient using an inverse technique,” Inverse Probl. Sci. Eng, vol. 17, no. 5, pp. 569–589, 2009. DOI: https://doi.org/10.1080/17415970802285293.
- L. F. S. Carollo, A. L. F. Lima E Silva, and S. M. M. Lima E Silva, “Applying different heat flux intensities to simultaneously estimate the thermal properties of metallic materials,” Meas. Sci. Technol, vol. 23, no. 6, pp. 065601, 2012. DOI: https://doi.org/10.1088/0957-0233/23/6/065601.
- A. P. Fernandes, M. B. Dos Santos, and G. Guimarães, “An analytical transfer function method to solve inverse heat conduction problems,” Appl. Math. Model, vol. 39, no. 22, pp. 6897–6914, 2015. DOI: https://doi.org/10.1016/j.apm.2015.02.012.
- A. Jain and K. E. Goodson, “Measurement of the thermal conductivity and heat capacity of freestanding shape memory thin films using the 3ω method,” J. Heat Transfer, vol. 130, no. 10, pp. 102402, 2008. DOI: https://doi.org/10.1115/1.2945904.
- T. Ding, Y. Jannot, and A. Degiovanni, “Theoretical study of the limits of the 3ω method using a new complete quadrupole model,” Int. J. Therm. Sci., vol. 86, pp. 314–324, 2014. DOI:https://doi.org/10.1016/j.ijthermalsci.2014.06.010.
- K. Mishra, B. Garnier, S. Le Corre, and N. Boyard, “Accurate measurement of the longitudinal thermal conductivity and volumetric heat capacity of single carbon fibers with the 3ω method,” J. Thermal Anal. Calorim, vol. 139, no. 2, pp. 1037–1047, 2020. DOI: https://doi.org/10.1007/s10973-019-08568-z.
- Y. Zhu, “Heat-loss modified angstrom method for simultaneous measurements of thermal diffusivity and conductivity of graphite sheets: the origins of heat loss in angstrom method,” Int. J. Heat Mass Transfer, vol. 92, pp. 784–791, 2016. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2015.09.032.
- A. Prasad and A. Ambirajan, “Criteria for accurate measurement of thermal diffusivity of solids using the angstrom method,” Int. J. Therm. Sci, vol. 134, pp. 216–223, 2018. DOI:https://doi.org/10.1016/j.ijthermalsci.2018.08.007.
- S. Corasaniti, M. Potenza, P. Coppa, and G. Bovesecchi, “Comparison of different approaches to evaluate the equivalent thermal diffusivity of building walls under dynamic conditions,” Int. J. Therm. Sci, vol. 150, pp. 106232, 2020. DOI:https://doi.org/10.1016/j.ijthermalsci.2019.106232.
- A. J. Angstrom, “A new method of determining the thermal conductivity of bodies,” Phil. Mag, vol. 25, no. 166, pp. 130–142, 1863. DOI: https://doi.org/10.1080/14786446308643429.
- S. Reif-Acherman, “Early and current experimental methods for determining thermal conductivities of metals, int,” J. Heat Mass Transfer, vol. 77, pp. 542–563, 2014. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2014.05.038.
- J. Hahn, T. Reid, and A. Marconnet, “Infrared microscopy enhanced angstrom’s method for thermal diffusivity of polymer monofilaments and films,” J. Heat Transfer, vol. 141, no. 8, pp. 081601, 2019. DOI: https://doi.org/10.1115/1.4043619.
- W. M. Chirdon and A. P. Patil, “An oscillating boundary temperature method for the determination of transient thermal conductivity and internal heat generation with a comparison to a transient hot-wire method,” Int. J. Thermophys, vol. 32, no. 10, pp. 2010–2026, 2011. DOI: https://doi.org/10.1007/s10765-011-1072-1.
- H. Brendel, G. Seifert, and F. Raether, “Determination of thermal diffusivity of fibrous insulating materials at high temperatures by thermal wave analysis,” Int. J. Heat Mass Transfer, vol. 108, pp. 2514–2522, 2017. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.063.
- H. Naseem and H. Murthy, “A simple thermal diffusivity measurement technique for polymers and particulate composites,” Int. J. Heat Mass Transfer, vol. 137, pp. 968–978, 2019. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.171.
- C. O. Lahoucine and A. Khellaf, “Periodic method: correction for thermocouple and simultaneous estimation of thermal conductivity and thermal diffusivity,” Rev. Sci. Instrum, vol. 75, no. 7, pp. 2356–2361, 2004. DOI: https://doi.org/10.1063/1.1765759.
- JCGM 101, Evaluation of measurement data – supplement 1 to the “guide to the expression of uncertainty in measurement” – propagation of distributions using a monte carlo method, joint committee for guides in metrology, 2008.
- H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids. Oxford Science Publications: Oxford, UK, 1959.
- S. Kakaç, Y. Yener, and C. P. Naveira-Cotta, Heat Conduction. 5th ed. Boca Raton, FL, USA: CRC Press, 2018.
- T. L. Bergman, A. S. Lavine, F. P. Incropera, and D. P. Dewitt, Fundamentals of Heat and Mass Transfer. 7th ed. New Jersey, USA: John Wiley & Sons, 2011.
- A. Haji-Sheikh, Y. S. Hong, S. M. You, and J. V. Beck, “Sensitivity analysis for thermophysical property measurements using the periodic method,” J. Heat Transfer, vol. 120, no. 3, pp. 568–576, 1998. DOI: https://doi.org/10.1115/1.2824312.
- J. R. Ferreira-Oliveira et al., “Uncertainty quantification through use of the monte carlo method in a one‑dimensional heat conduction experiment,” Int. J. Thermophys, vol. 41, no. 10, pp. 140, 2020. DOI: https://doi.org/10.1007/s10765-020-02724-6.
- D. C. Ripple and K. M. Garrity, “Uncertainty budgets for comparison calibrations of thermocouples,” NCSLI Meas., vol. 1, no. no. 1, pp. 28–34, 2006. DOI: https://doi.org/10.1080/19315775.2006.11721305.
- D. Deaver, “The calibration and use of thermocouple simulators,” NCSLI Meas, vol. 2, no. no. 3, pp. 34–38, 2007. DOI: https://doi.org/10.1080/19315775.2007.11721383.
- A. K. Kaminise, G. Guimarães, and M. B. da Silva, “Development of a tool–work thermocouple calibration system with physical compensation to study the influence of tool-holder material on cutting temperature in machining,” Int. J. Adv. Manuf. Technol, vol. 73, no. 5–8, pp. 735–747, 2014. DOI: https://doi.org/10.1007/s00170-014-5898-0.
- Y. T. Iç, E. S. Güler, and Z. E. Çakir, “Reducing uncertainty in a type j thermocouple calibration process,” Int. J. Thermophys, vol. 40, no. 5, pp. 53, 2019. DOI: https://doi.org/10.1007/s10765-019-2516-2.
- S. K. Manjhi and R. Kumar, “Surface heat flux measurements for short time-period on combustion chamber with different types of coaxial thermocouples,” Exp. Heat Transfer, vol. 33, no. 3, pp. 282–303, 2020. DOI: https://doi.org/10.1080/08916152.2019.1630031.
- J. E. S. Leal, J. A. da Silva, and R. V. Arencibia, “Contributions to the adaptive monte carlo method,” J. Braz. Soc. Mech. Sci. Eng, vol. 42, no. 9, pp. 462, 2020. DOI: https://doi.org/10.1007/s40430-020-02548-3.
- C. Wang, Z. Qiu, and Y. Yang, “Uncertainty propagation of heat conduction problem with multiple random inputs,” Int. J. Heat Mass Transfer, vol. 99, pp. 95–101, 2016. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.094.
- R. J. Moffat, “Describing the uncertainties in experimental results,” Exp. Thermal Fluid Sci, vol. 1, no. 1, pp. 3–17, 1988. DOI: https://doi.org/10.1016/0894-1777(88)90043-X.
- M. Hedayati-Dezfooli and W. H. Leong, “A design of experimental apparatus for studying coupled heat and moisture transfer in soils at high-temperature conditions,” Exp. Heat Transfer, vol. 33, no. 2, pp. 155–178, 2020. DOI: https://doi.org/10.1080/08916152.2019.1600618.
- N. P. Ramos, L. F. S. Carollo, and S. M. M. Lima E Silva, “Contact resistance analysis applied to simultaneous estimation of thermal properties of metals,” Meas. Sci. Technol, vol. 31, no. 10, pp. 105601, 2020. DOI: https://doi.org/10.1088/1361-6501/ab8e6a.
- S. Babu, K. Manisekar, A. P. Senthil Kumar, and D. Rajenthirakumar, “Experimental study of thermal contact resistance in hardened bearing surfaces,” Exp. Heat Transfer, vol. 28, no. 2, pp. 189–203, 2015. DOI: https://doi.org/10.1080/08916152.2013.860503.
- Y. Duan and H. Yang. “Influence of thermal contact resistance of cementing interface on radial heat transfer in wellbore,” Exp. Heat Transfer, 2020. DOI: https://doi.org/10.1080/08916152.2020.1715511.
- Y. S. Touloukian, R. W. Powell, C. Y. Ho, and M. C. Nicolau. Thermophysical Properties of Materials, Vol. 10, New York:Plenum Press, 1972.