References
- R. Kumar, A. Kumar, and V. Goel, “Simulation of flow and heat transfer in triangular cross- sectional solar- assisted air heater,” J. Sol. Energy Eng., vol. 141, no. 1, 2019. DOI: https://doi.org/10.1115/1.4041098.
- A. Araujo, “Thermo-Hydraulic performance of solar air collector with artificial roughened absorbers: A comparative review of semi-empirical models,” Energies, vol. 13, no. 14, pp.3536, 2020. DOI: https://doi.org/10.3390/en13143536.
- R. Kumar, A. S. Kashyap, P. Singh, V. Goel, and K. Kumar, “Innovatively arranged curved ribbed solar assisted air heater: Performance and correlation development for heat and flow characteristics,” J. Sol. Energy Eng., vol. 142, no. 3, 2020. DOI: https://doi.org/10.1115/1.4045827.
- O. Yaldiz, C. Ertekin, and H. I. Uzun, “Mathematical modelling of thin layer solar drying of sultana grapes,” Energy, vol. 26, no. 5, pp.457–465, 2001. DOI: https://doi.org/10.1016/S0360-5442(01)00018-4.
- H. S. Arunkumar, K. V. Karanth, and S. Kumar, “Review on the design modifications of a solar air heater for improvement in the thermal performance,” Sustainable Energy Technol. Assess., vol. 39, pp. 100685, 2020. DOI: https://doi.org/10.1016/j.seta.2020.100685.
- R. Kumar, A. Kumar, and V. Goel, “Effect of rounded corners on the heat transfer and fluid flow through triangular duct,” J Heat Transfer, vol. 140, no. 12, pp.121701, 2018. DOI: https://doi.org/10.1115/1.4040957.
- R. P. Varun and S. K. Saini, “Singal, A review on roughness geometry used in solar air heaters,” Sol. Energy, vol. 81, no. 11, pp.1340–1350, 2007. DOI: https://doi.org/10.1016/j.solener.2007.01.017.
- R. Kumar, S. Khurana, A. Kumar, and V. Goel, “Effect of dimple intrusions and curvature radius of rounded corner triangular duct on fluid flow and heat transfer,” J. Therm. Sci. Eng. Appl., vol. 11, no. 3, pp.031001, 2018. DOI: https://doi.org/10.1115/1.4041683.
- R. Kumar and V. A. Kumar, “Thermal and fluid dynamic characteristics of flow through triangular cross-section duct: A review,” Renewable Sustainable Energy Rev., vol. 61, pp. 123–140, 2016. DOI: https://doi.org/10.1016/j.rser.2016.03.011.
- R. Kumar, et al., “Numerical investigation of heat transfer and friction factor in ribbed triangular duct solar air heater using computational fluid dynamics (CFD),” J. Mech. Sci. Technol., vol. 32, no. 1, pp.399–404, 2018. DOI: https://doi.org/10.1007/s12206-017-1240-8.
- G. Bharadwaj, V. R. Kumar, and A. Sharma, “Heat transfer augmentation and flow characteristics in ribbed triangular duct solar air heater: An experimental analysis,” Int. J. Green Energy, vol. 14, no. 7, pp.587–598, 2017. DOI: https://doi.org/10.1080/15435075.2017.1307751.
- V. Goel, P. Guleria, and R. Kumar, “Effect of apex angle variation on thermal and hydraulic performance of roughened triangular duct,” Int. Commun. Heat Mass Transfer, vol. 86, pp. 239–244, 2017. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2017.06.008.
- A. Soi, R. Singh, and B. Bhushan, “Heat transfer and friction characteristics of solar air heater duct having protruded roughness geometry on absorber plate,” Exp. Heat Transfer, vol. 31, no. 6, pp. 571–585, 2018. DOI: https://doi.org/10.1080/08916152.2018.1468832.
- A. Perwez, S. Shende, and R. Kumar, “Heat transfer and friction factor characteristic of spherical and inclined teardrop dimple channel subjected to forced convection,” Exp. Heat Transfer, vol. 32, no. 2, pp.159–178, 2019. DOI: https://doi.org/10.1080/08916152.2018.1485786.
- M. A. Elyyan and D. K. Tafti, “A novel split-dimple interrupted fin configuration for heat transfer augmentation,” Int J Heat Mass Transf, vol. 52, no. 5–6, pp.1561–1572, 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.07.046.
- R. Maithani, A. Kumar, G. Raghav, M. Nagpal, and B. Kumar, “Thermal analysis of jet impingement on hemispherical protrusion on heated surface,” Exp. Heat Transfer, pp. 1–16, 2020. DOI: https://doi.org/10.1080/08916152.2020.1808117.
- C. Prakash and R. P. Saini, “Heat transfer and friction in rectangular solar air heater duct having spherical and inclined rib protrusions as roughness on absorber plate,” Exp. Heat Transfer, vol. 32, no. 5, pp.469–487, 2019. DOI: https://doi.org/10.1080/08916152.2018.1543367.
- A. Kumar and A. Layek, “Evaluation of the performance analysis of an improved solar air heater with Winglet shaped ribs,” Exp. Heat Transfer, vol. 2020, 2020. DOI: https://doi.org/10.1080/08916152.2020.1838670.
- M. Nanjundappa, “Optimum thermo-hydraulic performance of solar air heater provided with cubical roughness on the absorber surface,” Exp. Heat Transfer, vol. 33, no. 4, pp.374–387, 2020. DOI: https://doi.org/10.1080/08916152.2019.1652214.
- S. S. Patel and A. Lanjewar, “Experimental and numerical investigation of solar air heater with novel V-rib geometry,” J. Storage Mater., vol. 21, pp. 750–764, 2019.
- R. Maithani and J. S. Saini, “Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with V-ribs with symmetrical gaps,” Exp. Therm Fluid Sci., vol. 70, pp. 220–227, 2016. DOI: https://doi.org/10.1016/j.expthermflusci.2015.09.010.
- G. K. Chhaparwal, A. Srivastava, and R. Dayal, “Artificial repeated-rib roughness in a solar air heater – a review,” Sol. Energy, vol. 194, pp. 329–359, 2019. DOI: https://doi.org/10.1016/j.solener.2019.10.011.
- S. K. Jain, G. D. Agarwal, and R. Misra, “Experimental investigation of thermohydraulic performance of the solar air heater having arc-shaped ribs with multiple gaps,” J. Therm. Sci. Eng. Appl., vol. 12, no. 1, pp.011014, 2020. DOI: https://doi.org/10.1115/1.4044427.
- S. K. Jain, G. D. Agarwal, and R. Misra, “Heat transfer augmentation using multiple gaps in arc-shaped ribs roughened solar air heater: An experimental study,” Energy Sources (Part A), 2019. DOI:https://doi.org/10.1080/15567036.2019.1607945).
- V. S. Hans, R. S. Gill, and S. Singh, “Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with broken arc ribs,” Exp. Therm Fluid Sci., vol. 80, pp. 77–89, 2017. DOI: https://doi.org/10.1016/j.expthermflusci.2016.07.022.
- R. Kumar, et al., “Performance evaluation and optimization of solar assisted air heater with discrete multiple arc shaped ribs,” J. Storage Mater., vol. 26, pp. 100978, 2019. DOI: https://doi.org/10.1016/j.est.2019.100978.
- R. Kumar, V. Goel, and M. Kumar, “Effect of providing gap in multiple-arc rib-roughened solar air heater - Part 1,” J. Mech. Sci. Technol., vol. 34, no. 6, pp.2619–2625, 2020. DOI: https://doi.org/10.1007/s12206-020-0535-3.
- P. T. Saravanakumar, D. Somasundaram, and M. M. Matheswaran, “Thermal and thermo-hydraulic analysis of arc-shaped rib roughened solar air heater integrated with fins and baffles,” Sol. Energy, vol. 180, pp. 360–371, 2019. DOI: https://doi.org/10.1016/j.solener.2019.01.036.
- M. K. Sahu and R. K. Prasad, “Exergy based performance evaluation of solar air heater with arc-shaped wire roughened absorber plate,” Renewable Energy, vol. 96, pp. 233–243, 2016. DOI: https://doi.org/10.1016/j.renene.2016.04.083.
- Y. Xie, D. Shi, and Z. Shen, “Experimental and numerical investigation of heat transfer and friction performance for turbine blade tip cap with combined pin-fin-dimple/protrusion structure,” Int J Heat Mass Transf, vol. 104, no. 104, pp.1120–1134, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.032.
- R. Kumar, A. Kumar, and V. Goel, “A parametric analysis of rectangular rib roughened triangular duct solar air heater using computational fluid dynamics,” Sol. Energy, vol. 157, pp. 1095–1107, 2017. DOI: https://doi.org/10.1016/j.solener.2017.08.071.
- D. Jin, J. Zuo, S. Quan, S. Xu, and H. Gao, “Thermohydraulic performance of solar air heater with staggered multiple V-shaped ribs on the absorber plate,” Energy, vol. 127, pp. 68–77, 2017. DOI: https://doi.org/10.1016/j.energy.2017.03.101.
- S. Bhattacharyya, H. Chattopadhyay, and A. C. Benim, “3D CFD simulation on heat transfer enhancement in turbulent channel flow with twisted tape inserts,” Prog. Comput. Fluid Dyn., vol. 17, no. 3, pp. 193–197, 2017. DOI: https://doi.org/10.1504/PCFD.2017.084356.
- S. Bhattacharyya et al., “Experimental investigation on heat transfer enhancement by swirl generators in a solar air heater duct,” Int. J. Heat Technol, vol. 34, no. 2, pp. 191–196, 2016. DOI: https://doi.org/10.18280/ijht.
- S. Bhattacharyya, A. C. Benim, H. Chattopadhyay, and A. Banerjee, “Experimental and numerical analysis of forced convection in a twisted tube,” J. Therm. Sci., vol. 23, no. Suppl. 4, pp.1043–1052, 2019. DOI: https://doi.org/10.2298/TSCI19S4043B.
- S. Bhattacharyya, H. Chattopadhyay, A. Guin, and A. C. Benim, “Investigation of inclined turbulators for heat transfer enhancement in a solar air heater,” Heat Transfer Eng, vol. 40, no. 17–18, pp. 1451–1460, 2019. DOI: https://doi.org/10.1080/01457632.2018.1474593.
- S. Bhattacharyya, H. Chattopadhyay, and A. C. Benim, “Computational investigation of heat transfer enhancement by alternating inclined ribs in tubular heat exchanger,” Prog. Comput. Fluid Dyn, vol. 17, no. 6, pp. 390–396, 2017. DOI: https://doi.org/10.1504/PCFD.2017.088818.
- S. Bhattacharyya, “Fluid flow and heat transfer in a heat exchanger channel with short-length twisted tape turbulator inserts,” Iran. J. Sci. Technol. Transac. Mech. Engi, ( online Published). 2018. doi: https://doi.org/10.1007/s40997-018-0251-0.
- S. Bhattacharyya, A. I. Bashir, K. Dey, and R. Sarkar, “Effect of novel short-length wavy-tape turbulators on fluid flow and heat transfer: Experimental study,” Exp. Heat Transfer, vol. 33, no. 4, pp.335–354, 2020. DOI: https://doi.org/10.1080/08916152.2019.1639847.
- S. Bhattacharyya, H. Chattopadhyay, and A. Haldar, “Design of twisted tape turbulator at different entrance angle for heat transfer enhancement in a solar heater,” Beni-Suef Univ. J. Basic Appl. Sci, vol. 7, no. 1, pp. 118–126, 2018. DOI: https://doi.org/10.1016/j.bjbas.2017.08.003.
- A. P. Singh and S. Varun, “Effect of artificial roughness on heat transfer and friction characteristics having multiple arc shaped roughness element on the absorber plate,” Sol. Energy, vol. 105, pp. 479–493, 2014. DOI: https://doi.org/10.1016/j.solener.2014.04.007.
- A. P. Singh and S. Varun, “Heat transfer and friction factor correlations for multiple arc shape roughness elements on the absorber plate used in solar air heaters,” Exp. Therm Fluid Sci., vol. 54, pp. 117–126, 2014. DOI: https://doi.org/10.1016/j.expthermflusci.2014.02.004.
- ASHRAE Standard, Method of Testing to Determine the Thermal Performance of Solar Collectors, American Society of Heating, Refrigeration and Air Conditioning Engineers, Atlanta, GA: US Department of Energy, Vol. 30329, 2003.
- F. W. Dittus and L. M. K. Boelter, “Heat transfer in automobile radiators of the tubular type,” Reprinted Int. Commun. Heat Mass, vol. 12, pp. 3–22, 1985.
- B. S. Petukhov, Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties, in Advances in Heat Transfer, Eds. J. P. Hartnett and T. F., Elsevier, 6, 503–564, 1970.
- H. Blasius, “Grenzschichten in Flussigkeiten mit kleiner Reibung,” Zeitschrift fur Mathematische Physik, vol. 56, pp. 1–37, 1908.