References
- A. Žukauskas “Heat Transfer from Tubes in Crossflow,”in Adv. Heat Transf, James Hartnett, Thomas Irvine, Eds. New York: Academic Press, 1972. pp.93–160.
- S. Churchill and M. Bernstein, “A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow,” J. Heat Transf., vol. 99, no. 2, pp.300–306, 1977. DOI: https://doi.org/10.1115/1.3450685.
- V. T. Morgan “The overall convective heat transfer from smooth circular cylinders,”in Adv. Heat Transf, James Hartnett, Thomas Irvine, Eds. New York: Academic Press, 1975. pp.199–264.
- W. M. Kays, A. L. London, and E. Eckert. Compact Heat Exchangers. American Society of Mechanical Engineers Digital Collection, New York: McGraw-Hill Book Company, 1960.
- H. Schlichting, Boundary Layer Theory, Vol. 960. New York: McGraw-Hill Book Company, 1960.
- M. Zdravkovich and P. Bearman. Flow around Circular Cylinders—volume 1: Fundamentals. American Society of Mechanical Engineers Digital Collection, New York: Oxford University Press, 1998.
- S. Whitaker, “Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles,” AIChE J., vol. 18, no. 2, pp.361–371, 1972. DOI: https://doi.org/10.1002/aic.690180219.
- F. P. Incropera, et al. Fundamentals of Heat and Mass Transfer. New Jersey, USA: John Wiley & Sons, Inc., 2007.
- A. Nouri-Borujerdi and A. Lavasani, “Experimental study of forced convection heat transfer from a cam shaped tube in cross flows,” Int. J. Heat Mass Transf., vol. 50, no. 13–14, pp.2605–2611, 2007. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.11.028.
- M. Ali, O. Zeitoun, and A. Nuhait, “Forced convection heat transfer over horizontal triangular cylinder in cross flow,” International Journal of Thermal Sciences, vol. 50, no. 1, pp.106–114, 2011. DOI: https://doi.org/10.1016/j.ijthermalsci.2010.09.007.
- O. Zeitoun, M. Ali, and A. Nuhait, “Convective heat transfer around a triangular cylinder in an air cross flow,” International Journal of Thermal Sciences, vol. 50, no. 9, pp.1685–1697, 2011. DOI: https://doi.org/10.1016/j.ijthermalsci.2011.04.011.
- A. Lavasani and H. Bayat, “Heat transfer from two cam shaped cylinders in side-by-side arrangement,” World Acad. Sci., Eng. Technol, vol. 6, pp. 1298–1301, 2012.
- A. M. A. Lavasani and H. Bayat, “Heat transfer from two cam shaped cylinders in tandem arrangement.“ Int. Scie. Index, Mech. Mechatronics Eng, vol. 6, no, 1, pp. 330-333, 2012.
- H. Bayat, A. M. Lavasani, and T. Maarefdoost, “Experimental study of thermal–hydraulic performance of cam-shaped tube bundle with staggered arrangement,” Energy convers. manag., vol. 85, pp. 470–476, 2014. DOI: https://doi.org/10.1016/j.enconman.2014.06.009.
- A. M. Lavasani, H. Bayat, and T. Maarefdoost, “Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow,” Appl. Therm. Eng., vol. 65, no. 1–2, pp.85–93, 2014. DOI: https://doi.org/10.1016/j.applthermaleng.2013.12.078.
- A. M. Lavasani, T. Maarefdoost, and H. Bayat, “Effect of blockage ratio on pressure drag and heat transfer of a cam-shaped tube,” Heat Mass Transf., vol. 52, no. 9, pp.1935–1942, 2016. DOI: https://doi.org/10.1007/s00231-015-1711-3.
- A. M. A. Lavasani and H. Bayat, “Flow around two cam shaped cylinders in tandem arrangement,” International Journal of Mechanical and Mechatronics Engineering, vol. 6, pp. 1319–1322, 2012.
- A. Lavasani and A. Nouri Borujerdi, “Flow visualization around a non-circular tube,” International Journal of Engineering, vol. 19, pp. 73–82, 2006.
- M. Akbari, A. Mirabdolah Lavasani, and A. Naseri. “Experimental investigation of the heat transfer for non-circular tubes in a turbulent air cross flow,” Experimental Heat Transfer,UK: Taylor and Francis, pp. 1–18, 2020.
- C. K. Mangrulkar, et al. “Numerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflow,” Appl. Therm. Eng., vol. 110, pp. 521–538, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2016.08.174.
- G.-M. Zhang, et al. “Flow and heat transfer characteristics around egg-shaped tube. Journal of Hydrodynamics,” Ser. B, vol. 27, no. 1, pp. 76–84, 2015.
- S. E. S. Ahmed, et al. “Effect of attack and cone angels on air flow characteristics for staggered wing shaped tubes bundle,” Heat and Mass Transfer, vol. 51, no. 7, pp. 1001–1016, 2015. DOI: https://doi.org/10.1007/s00231-014-1473-3.
- C. K. Mangrulkar, et al. “Experimental and CFD prediction of heat transfer and friction factor characteristics in cross flow tube bank with integral splitter plate,” Int J Heat Mass Transf, vol. 104, pp. 964–978, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.013.
- C. K. Mangrulkar et al., “Thermal performance escalation of cross flow heat exchanger using in-line elliptical tubes,” Experimental Heat Transfer, UK: Taylor and Francis, pp. 1–26, 2019.
- R. Deepakkumar and S. Jayavel, “Air side performance of finned-tube heat exchanger with combination of circular and elliptical tubes,” Appl. Therm. Eng., vol. 119, pp. 360–372, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.03.082.
- M. Murthy and A. Gupta, “Experimental investigation to study flow and heat transfer characteristics over a NACA0018 aerofoil for different height ratios,” Heat and Mass Transfer, vol. 50, no. 7, pp.923–932, 2014. DOI: https://doi.org/10.1007/s00231-014-1307-3.
- R. L. Mohanty, A. Swain, and M. K. Das, “Thermal performance of mixed tube bundle composed of circular and elliptical tubes,” Thermal Science and Engineering Progress, vol. 5, pp. 492–505, 2018. DOI: https://doi.org/10.1016/j.tsep.2018.02.009.
- A. Gholami, M. A. Wahid, and H. Mohammed, “Thermal–hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns,” Int J Heat Mass Transf, vol. 106, pp. 573–592, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.028.
- Y. Lei, et al. “Improving the thermal hydraulic performance of a circular tube by using punched delta-winglet vortex generators,” Int J Heat Mass Transf, vol. 111, pp. 299–311, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.03.101.
- S. Bouzari and J. Ghazanfarian, “Unsteady forced convection over cylinder with radial fins in cross flow,” Appl. Therm. Eng., vol. 112, pp. 214–225, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2016.10.052.
- S. Toolthaisong and N. Kasayapanand, “Effect of attack angles on air side thermal and pressure drop of the cross flow heat exchangers with staggered tube arrangement,” Energy Procedia, vol. 34, pp. 417–429, 2013. DOI: https://doi.org/10.1016/j.egypro.2013.06.770.
- T. A. Ibrahim and A. Gomaa, “Thermal performance criteria of elliptic tube bundle in crossflow,” Int. J. Therm. Sci., vol. 48, no. 11, pp.2148–2158, 2009. DOI: https://doi.org/10.1016/j.ijthermalsci.2009.03.011.
- M. A. Alnakeeb, et al. “Experimental study of mixed convection from horizontal isothermal elliptic cylinders at different aspect ratios,” Exp. Heat Transfer, vol. 33, no. 3, pp. 245–260, 2020. DOI: https://doi.org/10.1080/08916152.2019.1625468.
- A. Choudhary, et al. “Enhanced thermal and fluid flow performance of cross flow tube bank with perforated splitter plate,” Exp. Heat Transfer, pp. 1–13, 2020. DOI:https://doi.org/10.1080/08916152.2020.1749190.
- S. Abolfathi, et al. “Experimental study on flow around a tube in mixed tube bundles comprising cam-shaped and circular cylinders in in-line arrangement,” International Journal of Thermal Sciences, vol. 163, pp. 106812, 2021. DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106812.
- R. Webb, “Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design,” Int J Heat Mass Transf, vol. 24, no. 4, pp.715–726, 1981. DOI: https://doi.org/10.1016/0017-9310(81)90015-6.
- A. J. Wheeler and A. R. Ganji. Introduction to Engineering Experimentation. New Jersey, Prentice Hall: Englewood Cliffs, 1996.
- S. F. Hoerner, Fluid-Dynamic Drag. Midland Park, NJ: published by the author, 1965, pp. 3–19.