Experimental examination of condensation heat transfer enhancement with different perforated tube inserts

References

• D. Kumar, A. K. Patil, and M. Kumar, “Experimental investigation of heat transfer and fluid flow in a circular tube with lanced ring insert,” Exp. Heat Transfer, vol. 33, 2020. DOI: 10.1080/08916152.2019.1691086.
   Web of Science ®Google Scholar
• K. Javaherdeh, A. Vaisi, and R. Moosavi, “The effects of fin height, fin-tube contact thickness and louver length on the performance of a compact fin-and-tube heat exchanger,” Int. J. Heat Technol., vol. 36, pp. 825–834, 2018. DOI:10.18280/ijht.360307.
   Web of Science ®Google Scholar
• K. Javaherdeh, A. Vaisi, R. Moosavi, and M. Esmaeilpour, “Experimental and numerical investigations on louvered fin-and-tube heat exchanger with variable geometrical parameters,” J. Therm. Sci. Eng. Appl., 2017. DOI: 10.1115/1.4035449.
   Web of Science ®Google Scholar
• S. Singh, L. Pandey, H. Kharkwal, and H. Sah, “Augmentation of thermal performance of heat exchanger using elliptical and circular insert with vertical twisted tape,” Exp. Heat Transfer, vol. 33, pp. 510–525, 2020. DOI: 10.1080/08916152.2019.1662856.
   Web of Science ®Google Scholar
• R. Moosavi and S. A. Gandjalikhan Nassab, “Turbulent forced convection over a single inclined forward step in a duct: part i – flow field,” Eng. Appl. Comput. Fluid Mech., 2008. DOI: 10.1080/19942060.2008.11015236.
   Google Scholar
• A. S. Patil, S. S. Kore, and N. K. Sane, “Thermal performance of tube exchanger enhanced with hexagonal ring turbulators,” Exp. Heat Transfer, vol. 33, pp. 455–470, 2020. DOI: 10.1080/08916152.2019.1656302.
   Web of Science ®Google Scholar
• H. Saffari and R. Moosavi, “Numerical study of the influence of geometrical characteristics of a vertical helical coil on a bubbly flow,” J. Appl. Mech. Tech. Phys., vol. 55, pp. 957–969, 2014. DOI: 10.1134/S0021894414060066.
   Web of Science ®Google Scholar
• S. Yadav and S. K. Sahu, “Effect of helical surface disc turbulator on thermal and friction characteristics of double pipe water to air heat exchanger,” Exp. Heat Transfer, vol. 34, pp. 51–67, 2021. DOI: 10.1080/08916152.2020.1714819.
   Web of Science ®Google Scholar
• R. Moosavi, A. Vaisi, and K. Javaherdeh, “Investigation of the geometrical structure of louvered fins in fin-tube heat exchangers for determining the minimum distance of the headers,” J. Mech. Sci. Technol., vol. 35, pp. 1721–1731, 2021. DOI: 10.1007/s12206-021-0335-4.
   Web of Science ®Google Scholar
• S. A. Gandjalikhan Nassab, R. Moosavi, and S. M. Hosseini Sarvari, “Turbulent forced convection flow adjacent to inclined forward step in a duct,” Int. J. Therm. Sci., vol. 48, pp. 1319–1326, 2009. DOI: 10.1016/j.ijthermalsci.2008.10.003.
   Web of Science ®Google Scholar
• G. Yang, et al., “Experimental investigation on heat transfer characteristics of two-phase propane flow condensation in shell side of helically baffled shell-and-tube condenser,” Int. J. Refrig., vol. 88, pp. 58–66, 2018. DOI: 10.1016/j.ijrefrig.2017.12.014.
   Web of Science ®Google Scholar
• R. Kiflemariam, C.-X. Lin, and R. Moosavi, “Numerical simulation,parametric study and optimization of thermoelectric generators for self-cooling of devices,” AIAA Aviat. 2014-11th AIAA/ASME Jt. Thermophys. Heat Transf. Conf., 2014.
   Google Scholar
• R. Datt, M. S. Bhist, A. Darshan Kotiyal, R. Maithani, and A. Kumar, “Development of new correlations for heat transfer and friction loss of solid ring with combined square wing twisted tape inserts heat exchanger tube,” Exp. Heat Transfer, vol. 32, pp. 179–200, 2019. DOI: 10.1080/08916152.2018.1505784.
   Web of Science ®Google Scholar
• R. Moosavi, M. Banihashemi, C.-X. Lin, and P.-Y. Abel Chuang, “Combined effects of a microchannel with porous media and transverse vortex generators (TVG) on convective heat transfer performance,” Int. J. Therm. Sci., vol. 166, pp. 106961, 2021. DOI: 10.1016/j.ijthermalsci.2021.106961.
   Web of Science ®Google Scholar
• R. Moosavi, M. Banihashemi, and C. X. Lin, “Thermal performance evaluation of a microchannel with different porous media insert configurations,” Int. J. Numer. Methods Heat Fluid Flow, 2021. DOI: 10.1108/HFF-02-2021-0104.
   Web of Science ®Google Scholar
• S. Bhattacharyya, A. C. Benim, H. Chattopadhyay, and A. Banerjee, “Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts,” Exp. Heat Transfer, vol. 32, pp. 411–425, 2019. DOI: 10.1080/08916152.2018.1531955.
   Web of Science ®Google Scholar
• H. Saffari, R. Moosavi, N. M. Nouri, and C. X. Lin, “Prediction of hydrodynamic entrance length for single and two-phase flow in helical coils,” Chem. Eng. Process. Process Intensif., vol. 86, pp. 9–21, 2014. DOI: 10.1016/j.cep.2014.10.005.
   Web of Science ®Google Scholar
• B. Kumar, M. Kumar, A. K. Patil, and S. Jain, “Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow: an experimental study,” Exp. Heat Transfer, vol. 32, pp. 524–544, 2019. DOI: 10.1080/08916152.2018.1545808.
   Web of Science ®Google Scholar
• T. Zhou, M. Chen, and B. Liang, “Thermal performance of a ground U-shaped tube with twisted tapes in sand/graphite backfill materials,” Exp. Heat Transfer, vol. 34, pp. 186–200, 2021. DOI: 10.1080/08916152.2020.1726528.
   Web of Science ®Google Scholar
• M. Gundermann, F. Raab, D. Raab, and T. W. Botsch, “Investigation of the heat transfer coefficient during the condensation of small quantities of water vapour from a mixture with a high proportion of non-condensable gas in a horizontal smooth tube,” Int. J. Heat Mass Transfer, vol. 170, pp. 121016, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121016.
   Web of Science ®Google Scholar
• Y. Gu, et al., “Condensation heat transfer characteristics of moist air outside 3-D finned tubes with different wettability,” Energy, vol. 207, pp. 118202, 2020. DOI: 10.1016/j.energy.2020.118202.
   Web of Science ®Google Scholar
• R. L. Webb, Principles of Enhanced Heat Transfer. 1994. DOI: 10.1016/0301-9322(95)90005-5.
   Google Scholar
• J. R. Thome, Wolverine Heat Transfer Engineering Data Book III. 2010.
   Google Scholar
• J. Wu, S. Zou, L. Wang, and Y. Dai, “Condensation heat transfer of R290 in micro-fin tube with inside diameter of 6.3 mm,” Exp. Heat Transfer, vol. 34, pp. 1–17, 2021. DOI: 10.1080/08916152.2020.1713255.
   Web of Science ®Google Scholar
• C. Y. Yang, “A critical review of condensation heat transfer predicting models-effects of surface-tension force,” J. Enhanc. Heat Transfer, vol. 6, pp. 217–236, 1999. DOI: 10.1615/JEnhHeatTransf.v6.i2-4.110.
   Web of Science ®Google Scholar
• M. M. Rahman, K. Kariya, and A. Miyara, “Experimental investigation of condensation heat transfer and adiabatic pressure drop characteristics inside a microfin and smooth tube,” Int. J. Air-Conditioning Refrig., vol. 25, pp. 1750027, 2017. DOI: 10.1142/S2010132517500274.
   Web of Science ®Google Scholar
• K. Qiu, B. Li, L. Wang, and Y. Dai, “Condensation heat transfer characteristics of a mixture of R1234ze (E) and R152a flowing inside a horizontal micro-fin tube,” Exp. Heat Transfer, pp. 1–21, 2020. DOI: 10.1080/08916152.2020.1813843.
   Web of Science ®Google Scholar
• I. H. Choi and N. H. Kim, “Flow condensation of R-410A in multiport tubes having smooth or micro-finned internal channels,” Exp. Heat Transfer, pp. 1–24, 2020. DOI: 10.1080/08916152.2020.1826598.
   Web of Science ®Google Scholar
• T. Chen and D. Wu, “Enhancement in heat transfer during condensation of an HFO refrigerant on a horizontal tube with 3D fins,” Int. J. Therm. Sci, vol. 124, pp. 318–326, 2018. DOI: 10.1016/j.ijthermalsci.2017.10.022.
   Web of Science ®Google Scholar
• X. Guo, Z. Ma, J. D. Chen, and J. Zhang, “Influence of different categories of condensates on film condensation of R-134a on in-line arranged 3D finned tubes,” Int. J. Heat Mass Transfer, vol. 178, pp. 121643, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121643.
   Web of Science ®Google Scholar
• H. Ali, et al., “Marangoni condensation of steam-ethanol mixtures on a horizontal low-finned tube,” Appl. Therm. Eng., vol. 117, pp. 366–375, 2017. DOI: 10.1016/j.applthermaleng.2017.02.016.
   Web of Science ®Google Scholar
• H. U. Rehman, H. M. Ali, S. Ahmad, and M. A. Baluch, “Experimental investigation of condensate retention on horizontal pin fin tube with varying pin angle,” Case Stud. Therm. Eng., vol. 17, pp. 100549, 2020. DOI: 10.1016/j.csite.2019.100549.
   Web of Science ®Google Scholar
• H. Ali, M. S. Kamran, H. M. Ali, and S. Imran, “Condensation heat transfer enhancement using steam-ethanol mixtures on horizontal finned tube,” Int. J. Therm. Sci., vol. 140, pp. 87–95, 2019. DOI: 10.1016/j.ijthermalsci.2019.02.033.
   Web of Science ®Google Scholar
• Y. Zhang, et al., “Investigation of the condensation heat-transfer between the wet air and 3-D finned-tube heat exchanger surface with different anti-corrosion coatings,” Exp. Heat Transfer, pp. 1–20, 2021. DOI: 10.1080/08916152.2021.1877371.
   Web of Science ®Google Scholar
• H. A. Moghaddam, A. Sarmadian, and M. Shafaee, “An experimental study on condensation heat transfer characteristics of R-600a in tubes with coiled wire inserts,” Appl. Therm. Eng, vol. 159, pp. 113889, 2019. DOI: 10.1016/j.applthermaleng.2019.113889.
   Web of Science ®Google Scholar
• A. Sarmadian, M. Shafaee, H. Mashouf, and S. G. Mohseni, “Condensation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes,” Exp. Therm Fluid Sci., vol. 86, pp. 54–62, 2017. DOI: 10.1016/j.expthermflusci.2017.04.001.
   Web of Science ®Google Scholar
• S. M. Ammar, et al., “Experimental investigation of condensation pressure drop of R134a in smooth and grooved multiport flat tubes of automotive heat exchanger,” Int. J. Heat Mass Transfer, vol. 130, pp. 1087–1095, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.11.018.
   Web of Science ®Google Scholar
• D. Y. Ji, D. Kim, and K. Y. Lee, “Enhancement of condensation heat transfer in the presence of non-condensable gas using steam jet method,” Int. J. Heat Mass Transfer, vol. 130, pp. 603–612, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.10.090.
   Web of Science ®Google Scholar
• A. K. Solanki and R. Kumar, “Condensation heat transfer and pressure drop characteristics of R-134a inside the flattened tubes at high mass flux and different saturation temperature,” Exp. Heat Transfer, vol. 32, pp. 69–84, 2019. DOI: 10.1080/08916152.2018.1485781.
   Web of Science ®Google Scholar
• H. Davar, N. M. Nouri, M. Navidbakhsh, S. Sekhavat, and A. Ansari, “Enhancement of dropwise condensation heat transfer on hydrophilic-hydrophobic hybrid surface using microparticles,” Exp. Heat Transfer, pp. 1–20, 2021. DOI: 10.1080/08916152.2021.1919244.
   Web of Science ®Google Scholar
• B. Zheng, et al., “An experimental study of in-tube condensation and evaporation using enhanced heat transfer (Eht) tubes,” Energies, vol. 14, pp. 867, 2021. DOI: 10.3390/en14040867.
   Web of Science ®Google Scholar
• B. Sajadi, M. Soleimani, M. A. Akhavan-Behabadi, and E. Hadadi, “The effect of twisted tape inserts on heat transfer and pressure drop of R1234yf condensation flow: an experimental study,” Int. J. Heat Mass Transfer, vol. 146, pp. 118890, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.118890.
   Web of Science ®Google Scholar
• H. A. Moghaddam, A. Sarmadian, M. Shafaee, and H. Enayatollahi, “Flow pattern maps, pressure drop and performance assessment of horizontal tubes with coiled wire inserts during condensation of R-600a,” Int. J. Heat Mass Transfer, vol. 148, pp. 119062, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119062.
   Web of Science ®Google Scholar
• H. A. Moghaddam, et al., “Condensation heat transfer and pressure drop characteristics of Isobutane in horizontal channels with twisted tape inserts,” Int. J. Refrig., vol. 118, pp. 31–40, 2020. DOI: 10.1016/j.ijrefrig.2020.06.019.
   Web of Science ®Google Scholar
• A. Vaisi, K. Javaherdeh, and R. Moosavi, “Experimental investigation of the thermal performance in a single-component two-phase flow in multistream multi-fluid plate-fin heat exchangers,” Int. J. Therm. Sci., vol. 171, pp. 107194, 2022. DOI: 10.1016/J.IJTHERMALSCI.2021.107194.
   Web of Science ®Google Scholar
• A. Vaisi, K. Javaherdeh, and R. Moosavi, “Condensation heat transfer performance in multi-fluid compact heat exchangers with wavy and strip fins,” Int. J. Heat Mass Transfer, vol. 182, pp. 121968, 2022. DOI: 10.1016/J.IJHEATMASSTRANSFER.2021.121968.
   Web of Science ®Google Scholar
• R. Remsburg, Thermal Design of Electronic Equipment. 2017. DOI: 10.1201/9781420042368.
   Google Scholar
• C. Borgnakke and R. E. Sonntag, Fundamentals of Thermodynamics, 8th ed. University of Michigan, Willey, 2013.
   Google Scholar
• S. Kakaç, A. E. Bergles, F. Mayinger, and H. Yüncü, Heat Transfer Enhancement of Heat Exchangers. Springer Science & Business Media, 2013.
   Google Scholar
• M. Baou, F. Afsharpanah, and M. A. Delavar, “Numerical study of enhancing vehicle radiator performance using different porous fin configurations and materials,” Heat Transfer Asian Res., vol. 49, pp. 502–518, 2020. DOI: 10.1002/htj.21624.
   Web of Science ®Google Scholar
• M. R. Salem, M. K. Althafeeri, K. M. Elshazly, M. G. Higazy, and M. F. Abdrabbo, “Experimental investigation on the thermal performance of a double pipe heat exchanger with segmental perforated baffles,” Int. J. Therm. Sci, pp. 39–52, 2017. DOI: 10.1016/j.ijthermalsci.2017.08.008.
   Google Scholar
• S. Kline and F. McClintock, “Describing uncertainties in single-sample experiments,” Mech. Eng., 1953.
   Google Scholar
• A. Vaisi, R. Moosavi, M. Lashkari, and M. Mohsen Soltani, “Experimental investigation of perforated twisted tapes turbulator on thermal performance in double pipe heat exchangers,” Chem. Eng. Process. Process Intensif., vol. 154, pp. 108028, 2020. DOI: 10.1016/j.cep.2020.108028.
   Web of Science ®Google Scholar