The angle of attack effect on thermal-hydraulic performance of a cam-shaped tube with constant heat flux in crossflow

References

• A. Choudhary, et al. “Enhanced thermal and fluid flow performance of cross flow tube bank with perforated splitter plate,” Exp. Heat Transfer, vol. 34, no. 4, pp. 329–341, 2021. DOI: 10.1080/08916152.2020.1749190.
   Web of Science ®Google Scholar
• R. Maithani, et al. “Effect of a Unique Winglet Twisted Tape Insert on Thermal and Hydraulic Properties of Tubular Heat Exchanger,” Exp Heat Transfer, 2022, 1–22.
   Web of Science ®Google Scholar
• A. Roshko, “Experiments on the flow past a circular cylinder at very high Reynolds number,” J Fluid Mech, vol. 10, no. 3, pp.345–356, 1961. DOI: 10.1017/S0022112061000950.
   Web of Science ®Google Scholar
• S. Churchill and M. Bernstein, “A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow” J. Heat Transf, vol. 99, no. 2, pp.300–306, 1977. DOI: 10.1115/1.3450685.
   Web of Science ®Google Scholar
• A. Zukauskas and J. Ziugzda, Heat Transfer of a Cylinder in Crossflow. Washington, DC: Hemisphere Publishing Corp. 1985. 219. Translation., 1985.
   Google Scholar
• R. Hilpert, “Wärmeabgabe von geheizten Drähten und Rohren im Luftstrom.” Forschung auf dem Gebiet des Ingenieurwesens A, vol. 4, no. 5, pp.215–224, 1933.
   Google Scholar
• J.-H. Myong, et al. “Experimental Investigation on the Airside Heat Transfer and Pressure Drop of the Fin-and-tube Heat Exchangers Having Oval Tubes,” Exp Heat Transfer, 2021, 1–16.
   Web of Science ®Google Scholar
• C. K. Mangrulkar, et al. “Thermal performance escalation of cross flow heat exchanger using in-line elliptical tubes,” Exp. Heat Transfer, vol. 33, no. 7, pp. 587–612, 2020. DOI: 10.1080/08916152.2019.1704946.
   Web of Science ®Google Scholar
• P. Mobedi, et al. “An experimental study on heat transfer characteristics of a cam-shaped tube with different aspect ratios in cross flow,” J. Mech. Eng., vol. 50, no. 3, pp. 225–231, 2020.
   Google Scholar
• T. Ota, et al. “Forced convection heat transfer from on elliptic cylinder of axis ratio 1: 2,” Bulletin of JSME, vol. 26, no. 212, pp. 262–267, 1983. DOI: 10.1299/jsme1958.26.262.
   Google Scholar
• T. OTA, H. Nishiyama, and T. Yukiyasu, “Heat transfer and flow around an elliptic cylinder,” Int J Heat Mass Transf, vol. 27, no. 10, pp.1771–1779, 1984. DOI: 10.1016/0017-9310(84)90159-5.
   Web of Science ®Google Scholar
• H. Nishiyama, T. Ota, and T. Matsuno, “Heat transfer and flow around elliptic cylinders in tandem arrangement. JSME international journal. Ser. 2, Fluids engineering, heat transfer, power, combustion, thermophysical properties,” vol. 31, no. 3, pp.410–419, 1988.
   Google Scholar
• A. O. Elsayed, E. Z. Ibrahim, and S. A. Elsayed, “Free convection from a constant heat flux elliptic tube,” Energy Convers. Manage., vol. 44, no. 15, pp.2445–2453, 2003. DOI: 10.1016/S0196-8904(03)00002-5.
   Web of Science ®Google Scholar
• A. Mirabdolah Lavasani and H. Bayat, “Heat transfer from two cam shaped cylinders in side-by-side arrangement,” Int. J. Mech. Mechatron. Eng., vol. 6, pp. 1298–1301, 2012.
   Google Scholar
• A. Mirabdolah Lavasani and H. Bayat, “Flow around two cam shaped cylinders in tandem arrangement,” Int. J. Mech. Mechatron. Eng., vol. 6, pp. 1319–1322, 2012.
   Google Scholar
• A. Nouri-Borujerdi and A. Mirabdolah Lavasani, “Drag of a single non-circular cylinder”. in The Eighteenth International Symposium on Transport Phenomena (Daejeon, Korea). 2007.
   Google Scholar
• A. Mirabdolah Lavasani and H. Bayat, “Heat transfer from two cam shaped cylinders in tandem arrangement. International science index,” Mech. Mechatron. Eng, vol. 6, pp. 330–333, 2012.
   Google Scholar
• . A. Nouri-Borujerdi and A. Mirabdolah Lavasani, “Flow visualization around a non-circular tube INTERNATIONAL JOURNAL OF ENGINEERING 19 1 73–82 ”, 2006.
   Google Scholar
• A. Nouri-Borujerdi and A. Mirabdolah Lavasani, “Experimental study of forced convection heat transfer from a cam shaped tube in cross flows” Int. J. Heat and Mass Transf, vol. 50, no. 13–14, pp.2605–2611, 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.11.028.
   Web of Science ®Google Scholar
• S. Nada, H. El-Batsh, and M. Moawed, “Heat transfer and fluid flow around semi-circular tube in cross flow at different orientations,” Heat and Mass Transfer, vol. 43, no. 11, pp.1157, 2007. DOI: 10.1007/s00231-006-0202-y.
   Web of Science ®Google Scholar
• A. Nouri-Borujerdi and A. Mirabdolah Lavasani, “Pressure loss and heat transfer characterization of a cam-shaped cylinder at different orientations,” J Heat Transfer, vol. 130, no. 12, pp.124503, 2008. DOI: 10.1115/1.2969259.
   Web of Science ®Google Scholar
• E. Ibrahim and M. Moawed, “Forced convection and entropy generation from elliptic tubes with longitudinal fins,” Energy Convers. Manage., vol. 50, no. 8, pp.1946–1954, 2009. DOI: 10.1016/j.enconman.2009.04.021.
   Web of Science ®Google Scholar
• T. A. Ibrahim and A. Gomaa, “Thermal performance criteria of elliptic tube bundle in crossflow” Int. J. Therm. Sci, vol. 48, no. 11, pp.2148–2158, 2009. DOI: 10.1016/j.ijthermalsci.2009.03.011.
   Web of Science ®Google Scholar
• M. Ishak, T. A. Tahseen, and M. M. Rahman, “Experimental investigation on heat transfer and pressure drop characteristics of air flow over a staggered flat tube bank in crossflow,” Int. J. Automot. Mech. Eng, vol. 7, pp. 900, 2013. DOI: 10.15282/ijame.7.2012.7.0073.
   Google Scholar
• M. Abd-Rabbo, et al. Forced convection heat transfer from three dimensional bodies in crossflow., Eng Res J, Vol. 137, Helwan University, 2013. M1–M19.
   Google Scholar
• S. Toolthaisong and N. Kasayapanand, Effect of Attack Angles on Air Side Thermal and Pressure Drop of the Cross Flow Heat Exchangers with Staggered Tube Arrangement Vol. 34, Energy Procedia, 2013, pp. 417–429.
   Google Scholar
• T. A. Tahseen, M. Rahman, and M. Ishak, “An experimental study of air flow and heat transfer over in-line flat tube bank,” Int. J. Automot. Mech. Eng, vol. 9, pp. 1487, 2014. DOI: 10.15282/ijame.9.2014.1.0123.
   Google Scholar
• A. Mirabdolah Lavasani, T. Maarefdoost, and H. Bayat, “Effect of blockage ratio on pressure drag and heat transfer of a cam-shaped tube,” Heat Mass Transf, vol. 52, no. 9, pp.1935–1942, 2016. DOI: 10.1007/s00231-015-1711-3.
   Web of Science ®Google Scholar
• T. A. Tahseen, M. Rahman, and M. Ishak, “Experimental Study on Heat Transfer and Friction Factor in Laminar Forced Convection over Flat Tube in Channel Flow,” Procedia Eng, Vol. 105, pp. 46–55, 2015
   Google Scholar
• S. Chamoli, et al. “Effect of shape modification on heat transfer and drag for fluid flow past a cam-shaped cylinder,” Int J Heat Mass Transf, vol. 131, pp. 1147–1163, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.11.057.
   Web of Science ®Google Scholar
• S. Abolfathi, et al. “Experimental study on flow around a tube in mixed tube bundles comprising cam-shaped and circular cylinders in in-line arrangement,” Int. J. Therm. Sci., vol. 163, pp. 106812, 2021. DOI: 10.1016/j.ijthermalsci.2020.106812.
   Web of Science ®Google Scholar
• P. Mobedi, et al. “The Aspect Ratio Effect on the Performance of a Cam-shaped Cylinder in Crossflow of Air,” Exp Heat Transfer, 2021, pp. 1–16.
   Web of Science ®Google Scholar
• C. Luo and K. Song, “Thermal performance enhancement of a double-tube heat exchanger with novel twisted annulus formed by counter-twisted oval tubes,” Int. J. Therm. Sci., vol. 164, pp. 106892, 2021. DOI: 10.1016/j.ijthermalsci.2021.106892.
   Web of Science ®Google Scholar
• M. Akbari, A. Mirabdolah Lavasani, and A. Naseri, “Experimental investigation of the heat transfer for non-circular tubes in a turbulent air cross flow,” Exp. Heat Transfer, vol. 34, no. 6, pp.513–530, 2021. DOI: 10.1080/08916152.2020.1792586.
   Web of Science ®Google Scholar
• T. L. Bergman, et al. Introduction to Heat Transfer. John Wiley & Sons, 2011.
   Google Scholar
• R. Moffat, “Contributions to the theory of single-sample uncertainty analysis,” J Fluids Eng, vol. 104, no. 2, pp.250–258, 1982. DOI: 10.1115/1.3241818.
   Web of Science ®Google Scholar
• F. M. White. “Fluid Mechanics.” McGraw-Hill Series in Mechanical Engineering, 6, New York: McGraw Hill, 2011, pp. 896.
   Google Scholar
• A. Žukauskas, “Heat transfer from tubes in crossflow, in Advances in heat transfer,” Elsevier 8 , pp. 93–160, 1972.
   Google Scholar