Establishment of correlations for the thermo-hydraulic parameters due to perforation in a multi-V rib roughened single pass solar air heater

References

• S. Jain and M. P. Sharma, “Oxidation, thermal, and storage stability studies of jatropha curcas biodiesel,“ International Scholarly Research Notices, vol. 2012, 2012. DOI: 10.5402/2012/861293.
   Google Scholar
• P. Goyal, M. P. Sharma, and S. Jain, “Optimization of transesterification of jatropha curcas oil to biodiesel using response surface methodology and its adulteration with kerosene,“ J. Mater. Environ. Sci., vol. 4, no. 2, pp.277–284, 2013.
   Google Scholar
• S. Jain and M. P. Sharma, “Engine performance and emission analysis using oxidatively stabilized Jatropha curcas biodiesel,” Fuel, vol. 106, pp. 152–156, 2013. DOI: 10.1016/j.fuel.2012.11.076.
   Web of Science ®Google Scholar
• V. P. Singh, M. Saini, A. Sharma, S. Jain, and G. Dwivedi, “Solar thermal receivers — a review,” Lect. Notes Mech. Eng, vol. II, pp. 1–25, 2022. DOI: 10.1007/978-981-16-8341.
   Google Scholar
• R. K. Ravi and R. P. Saini, “Experimental investigation on performance of a double pass artificial roughened solar air heater duct having roughness elements of the combination of discrete multi V shaped and staggered ribs,” Energy, vol. 116, pp. 507–516, 2016. DOI: 10.1016/j.energy.2016.09.138.
   Web of Science ®Google Scholar
• T. Alam and M. H. Kim, “A critical review on artificial roughness provided in rectangular solar air heater duct,” Renew. Sustain. Energy Rev, vol. 69, pp. 387–400, July. 2016. 2017. DOI: 10.1016/j.rser.2016.11.192.
   Web of Science ®Google Scholar
• B. Kumar, A. K. Patil, S. Jain, and M. Kumar, “Study of entropy generation in heat exchanger tube with multiple V cuts in perforated twisted tape insert,” J. Heat Transfer, vol. 141, no. August, pp. 1–8, 2019. DOI: 10.1115/1.4043769.
   Google Scholar
• B. Kumar, M. Kumar, A. K. Patil, and S. Jain, “Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow : an experimental study,” Exp. Heat Transf, pp. 1–21, 2018. DOI: 10.1080/08916152.2018.1545808.
   Web of Science ®Google Scholar
• T. Alam, R. P. Saini, and J. S. Saini, “Experimental investigation of thermohydraulic performance of a rectangular solar air heater duct equipped with V-shaped perforated blocks,” Adv. Mech. Eng, vol. 2014, 2014. DOI: 10.1155/2014/948313.
   Google Scholar
• G. K. Chhaparwal, A. Srivastava, and R. Dayal, “Artificial repeated-rib roughness in a solar air heater – a review,” Sol. Energy, vol. 194, no. August, pp. 329–359, 2019. DOI: 10.1016/j.solener.2019.10.011.
   Google Scholar
• S. Meena, C. S. Meena, and V. K. Bajpai, “Thermal performance of flat-plate collector : an experimental study,“ March, pp. 1–4. 2014.
   Google Scholar
• A. S. Yadav and S. K. Sharma, “Numerical simulation of ribbed solar air heater,” Advances in Fluid and Thermal Engineering, pp. 549–558, 2021. DOI: 10.1007/978-981-16-0159-0_49.
   Google Scholar
• A. S. Yadav, et al., “Enhanced solar thermal air heater: a numerical investigation,” Mater. Today Proc, vol. 47, no. xxxx, pp. 2777–2783, 2021. DOI: 10.1016/j.matpr.2021.03.385.
   Google Scholar
• T. Alam, C. S. Meena, N. B. Balam, A. Kumar, and R. Cozzolino, “Thermo-hydraulic performance characteristics and optimization of protrusion rib roughness in solar air heater,” Energies, vol. 14, no. 11, pp. 3159, 2021. DOI: 10.3390/en14113159.
   Web of Science ®Google Scholar
• M. Sharma, D. E. Kumari, and D. P. Meena, “CFD analysis in solar air heater for heat transfer enhancement: a review,” SSRN Electron. J, no. June, 2021. DOI: 10.2139/ssrn.3809706.
   Google Scholar
• R. Prasad, A. S. Yadav, N. K. Singh, and D. Johari, “Heat transfer and friction characteristics of an artificially roughened solar air heater BT,“ Advances in fluid and thermal engineering, pp. 613–626, 2019.
   Google Scholar
• C. S. Meena, S. Meena, and V. K. Bajpai, “Correlation between absorber plate thickness δ and collector efficiency factor F’ of solar flat-plate collector,” Appl. Mech. Mater, vol. 592–594, pp. 2341–2344, 2014. 10.4028/www.scientific.net/AMM.592-594.2341.
   Google Scholar
• T. Alam, et al., “Performance augmentation of the flat plate solar thermal collector: a review,” Energies, vol. 14, no. 19, pp. 6203, Sep. 2021. DOI: 10.3390/en14196203.
   Web of Science ®Google Scholar
• B. Kumar, A. K. Patil, S. Jain, and M. Kumar, “Effects of double V cuts in perforated twisted tape insert: an experimental study,” Heat Transf. Eng, vol. 41, no. 17, pp. 1473–1484, 2020. DOI: 10.1080/01457632.2019.1649926.
   Web of Science ®Google Scholar
• A. Kumar and A. Layek, “Evaluation of the performance analysis of an improved solar air heater with winglet shaped ribs,” Exp. Heat Transf, pp. 1–19, 2020. DOI: 10.1080/08916152.2020.1838670.
   Web of Science ®Google Scholar
• R. Karwa and B. K. Maheshwari, “Heat transfer and friction in an asymmetrically heated rectangular duct with half and fully perforated baffles at different pitches,” Int. Commun. Heat Mass Transf, vol. 36, no. 3, pp. 264–268, 2009. DOI: 10.1016/j.icheatmasstransfer.2008.11.005.
   Web of Science ®Google Scholar
• J. S. Kwak and S. Shin, “Effect of hole shape on the heat transfer in a rectangular duct with perforated blockage walls,” J. Mech. Sci. Technol, vol. 22, no. April, pp. 1945–1951, 2008. DOI: 10.1007/s12206-008-0736-7.
   Google Scholar
• T. Alam, R. P. Saini, and J. S. Saini, “Effect of circularity of perforation holes in V-shaped blockages on heat transfer and friction characteristics of rectangular solar air heater duct,” Energy Convers. Manag, vol. 86, pp. 952–963, 2014. DOI: 10.1016/j.enconman.2014.06.050.
   Web of Science ®Google Scholar
• T. Alam, R. P. Saini, and J. S. Saini, “Experimental investigation on heat transfer enhancement due to V-shaped perforated blocks in a rectangular duct of solar air heater,” Energy Convers. Manag, vol. 81, pp. 374–383, 2014. DOI: 10.1016/j.enconman.2014.02.044.
   Web of Science ®Google Scholar
• S. Chamoli and N. S. Thakur, “Heat transfer enhancement in solar air heater with V-shaped perforated baffles,” J. Renew. Sustain. Energy, vol. 5, no. 2, pp. 023122, 2013. DOI: 10.1063/1.4798411.
   Web of Science ®Google Scholar
• V. P. Singh, S. Jain, and J. M. L. Gupta, “Analysis of the effect of variation in open area ratio in perforated multi-V rib roughened single pass solar air heater- part A,” Energy Sources, Part A Recover. Util. Environ. Eff, pp. 1–20, 2022. DOI: 10.1080/15567036.2022.2029976.
   Web of Science ®Google Scholar
• S. Jain, J. Gupta, and V. P. Singh, “Analysis of the effect of perforation in multi-v rib artificial roughened single pass solar air heater: - part A,” Exp. Heat Transf, pp. 1–20, Oct. 2021. DOI: 10.1080/08916152.2021.1988761.
   Web of Science ®Google Scholar
• S. Jain, J. Gupta, and V. P. Singh, “Performance assessment of double-pass parallel flow solar air heater with perforated multi-V ribs roughness — part B,” Exp. Heat Transf, pp. 1–18, 2022. DOI: 10.1080/08916152.2021.2019147.
   Web of Science ®Google Scholar
• J. Liu, et al., “Heat transfer enhancement and turbulent flow in a rectangular channel using perforated ribs with inclined holes,” J. Heat Transfer, vol. 141, no. 4, 2019. DOI: 10.1115/1.4042841.
   Web of Science ®Google Scholar
• A. Kumar, N. Kumar, S. Kumar, and R. Maithani, “Exergetic efficiency analysis of impingement jets integrated with internal conical ring roughened solar heat collector,” Exp. Heat Transf, pp. 1–21, Nov. 2021. DOI: 10.1080/08916152.2021.2002466.
   Web of Science ®Google Scholar
• A. Tariq, P. K. Panigrahi, and K. Muralidhar, “Flow and heat transfer in the wake of a surface-mounted rib with a slit,” Exp. Fluids, vol. 37, no. 5, pp. 701–719, 2004. DOI: 10.1007/s00348-004-0861-8.
   Web of Science ®Google Scholar
• R. P. Saini and J. S. Saini, “Heat transfer and friction factor correlations for artificially roughened ducts with expanded metal mesh as roughness element,” Int. J. Heat Mass Transf, vol. 40, no. 4, pp. 973–986, 1996. DOI: 10.1016/0017-9310(96)00019-1.
   Web of Science ®Google Scholar
• L. Varshney and J. S. Saini, “Heat transfer and friction factor correlations for rectangular solar air heater duct packed with wire mesh screen matrices,” Sol. Energy, vol. 62, no. 4, pp. 255–262, 1998. DOI: 10.1016/S0038-092X(98)00017-6.
   Web of Science ®Google Scholar
• S. Singh, S. Chander, and J. S. Saini, “Heat transfer and friction factor correlations of solar air heater ducts artificially roughened with discrete V-down ribs,” Energy, vol. 36, no. 8, pp. 5053–5064, 2011. DOI: 10.1016/j.energy.2011.05.052.
   Web of Science ®Google Scholar
• V. S. Hans, R. P. Saini, and J. S. Saini, “Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple v-ribs,” Sol. Energy, vol. 84, no. 6, pp. 898–911, 2010. DOI: 10.1016/j.solener.2010.02.004.
   Web of Science ®Google Scholar
• R. P. Saini and J. Verma, “Heat transfer and friction factor correlations for a duct having dimple-shape artificial roughness for solar air heaters,” Energy, vol. 33, no. 8, pp. 1277–1287, 2008. DOI: 10.1016/j.energy.2008.02.017.
   Web of Science ®Google Scholar
• S. K. Saini and R. P. Saini, “Development of correlations for nusselt number and friction factor for solar air heater with roughened duct having arc-shaped wire as artificial roughness,” Sol. Energy, vol. 82, no. 12, pp. 1118–1130, 2008. DOI: 10.1016/j.solener.2008.05.010.
   Web of Science ®Google Scholar
• M. Sethi,Varun, N. S. Thakur, and N. S. Thakur, “Correlations for solar air heater duct with dimpled shape roughness elements on absorber plate,” Sol. Energy, vol. 86, no. 9, pp. 2852–2861, Sep. 2012. DOI: 10.1016/j.solener.2012.06.024.
   Web of Science ®Google Scholar
• S. Chamoli and N. S. Thakur, “Correlations for solar air heater duct with V-shaped perforated baffles as roughness elements on absorber plate,” Int. J. Sustain. Energy, vol. 35, no. 1, pp. 1–20, 2016. DOI: 10.1080/14786451.2013.857318.
   Web of Science ®Google Scholar
• A. Kumar, B. N. Prasad, and K. D. P. Singh, “Development of correlations of heat transfer and fluid flow characteristics for three sides artificially roughened solar air heaters,” J. Heat Mass Transf, vol. 15, no. 1, pp. 93–123, 2018. DOI: 10.17654/HM015010093.
   Google Scholar
• V. S. Hans, R. S. Gill, and S. Singh, “Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with broken arc ribs,” Exp. Therm. Fluid Sci, vol. 80, pp. 77–89, 2017. DOI: 10.1016/j.expthermflusci.2016.07.022.
   Web of Science ®Google Scholar
• T. Alam and M. H. Kim, “A critical review on artificial roughness provided in rectangular solar air heater duct”. Renew. Sustain. Energy Rev, vol. 69, no. October, pp. 387–400, 2016, 2017. DOI: 10.1016/j.rser.2016.11.192.
   Google Scholar
• E. R. G. E. R. L. WEBB and E. R. G. Eckert, “Application of rough surfaces to heat exchanger,” Int. J. Heat Mass Transf, vol. 15, no. 9, pp. 1647–1658, 1972. DOI: 10.1016/0017-9310(72)90095-6.
   Web of Science ®Google Scholar