Experimental analysis of local and average heat transfer between circular impinging jet and flat plate

References

• F. Matteo, J. Shanjuan, and V. K. Dhir, “A comparative study of cooling of high-power density electronics using sprays and microjets,” J Heat Transfer, vol. 127, no. 1, pp.38–48, 2005. DOI: 10.1115/1.1804205.
   Web of Science ®Google Scholar
• M. Kilic, T. Calisir, and S. Baskaya, “Experimental and numerical investigation of vortex promoter effects on heat transfer from heated electronic components in a rectangular channel with an impinging jet,” Heat Transfer Res., vol. 48, no. 5, pp.435–463, 2017. DOI: 10.1615/HeatTransRes.2016011959.
   Web of Science ®Google Scholar
• C. Jiang, T. Han, Z. Gao, and C. H. Lee, “A review of impinging jets during rocket launching,” Progress Aerospace Sci, vol. 109, no. December 2018, pp.100547, 2019. DOI: 10.1016/j.paerosci.2019.05.007.
   Google Scholar
• B. Han and R. J. Goldstein, “Jet-impingement heat transfer in gas turbine systems,” Ann. N. Y. Acad. Sci, vol. 934, pp. 147–161, 2001. DOI: 10.1111/j.1749-6632.2001.tb05849.x.
   PubMed Web of Science ®Google Scholar
• N. Zuckerman and N. Lior, “Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling,“Advances in Heat Transfer., vol. 39, pp. 565–631, 2006. DOI: 10.1016/S0065-2717(06)39006-5
   Google Scholar
• I. Sarkar, et al., “Application of TiO2 nanofluid-based coolant for jet impingement quenching of a hot steel plate,” Exp. Heat Transfer, vol. 32, no. 4, pp.322–336, 2019. DOI: 10.1080/08916152.2018.1517835.
   Web of Science ®Google Scholar
• M. Kilic and H. M. Ali, “Numerical investigation of combined effect of nanofluids and multiple impinging jets on heat transfer,” Thermal Sci, vol. 2018, pp. 3165–3173, 2018.
   Google Scholar
• J. Issac, D. Singh, and S. Kango, “Experimental and numerical investigation of heat transfer characteristics of jet impingement on a flat plate,” Heat Mass Transfer, vol. 56, no. 2, pp.531–546, 2020. DOI: 10.1007/s00231-019-02724-9.
   Web of Science ®Google Scholar
• D. Lytle and B. W. Webb, “Air jet impingement heat transfer at low nozzle-plate spacings,” Int J Heat Mass Transf, vol. 31, no. 12, pp.1687–1697, 1994. DOI: 10.1016/0017-9310(94)90059-0.
   Google Scholar
• R. Vinze, S. Chandel, M. D. Limaye, and S. V. Prabhu, “Influence of jet temperature and nozzle shape on the heat transfer distribution between a smooth plate and impinging air jets,” Int. J. Thermal Sci, vol. 99, pp. 136–151, 2016. DOI: 10.1016/j.ijthermalsci.2015.08.009.
   Web of Science ®Google Scholar
• J. W. Baughn and S. Shimizu, “Heat transfer measurements from a surface with uniform heat flux and an impinging jet,” J Heat Transfer, vol. 111, no. 4, pp.1096–1098, 1989. DOI: 10.1115/1.3250776.
   Web of Science ®Google Scholar
• M. Anwarullah, V. Vasudeva Rao, and K. V. Sharma, “Experimental investigation for enhancement of heat transfer from cooling of electronic components by circular air jet impingement,” Heat Mass Transfer, vol. 48, no. 9, pp.1627–1635, 2012. DOI: 10.1007/s00231-012-1005-y.
   Web of Science ®Google Scholar
• T. S. O’Donovan and D. B. Murray, “Jet impingement heat transfer - Part I: mean and root-mean-square heat transfer and velocity distributions,” Int J Heat Mass Transf, vol. 50, no. 17–18, pp.3291–3301, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.01.044.
   Web of Science ®Google Scholar
• J. Y. San and W. Z. Shiao, “Effects of jet plate size and plate spacing on the stagnation Nusselt number for a confined circular air jet impinging on a flat surface,” Int J Heat Mass Transf, vol. 49, no. 19–20, pp.3477–3486, 2006. DOI: 10.1016/j.ijheatmasstransfer.2006.02.055.
   Web of Science ®Google Scholar
• A. A. Tawfek, “Heat transfer and pressure distributions of an impinging jet on a flat surface,” Heat Mass Transfer, vol. 32, no. 1–2, pp.49–54, 1996. DOI: 10.1007/s002310050090.
   Web of Science ®Google Scholar
• B. Sagot, G. Antonini, A. Christgen, and F. Buron, “Jet impingement heat transfer on a flat plate at a constant wall temperature,” Int. J. Thermal Sci, vol. 47, no. 12, pp.1610–1619, 2008. DOI: 10.1016/j.ijthermalsci.2007.10.020.
   Web of Science ®Google Scholar
• J. M. Jha, S. V. Ravikumar, I. Sarkar, S. K. Pal, and S. Chakraborty, “Jet impingement cooling of a hot moving steel plate: an experimental study,” Exp. Heat Transfer, vol. 29, no. 5, pp.615–631, 2016. DOI: 10.1080/08916152.2015.1046019.
   Web of Science ®Google Scholar
• M. Wae-Hayee, P. Tekasakul, S. Eiamsa-Ard, and C. Nuntadusit, “Flow and heat transfer characteristics of in-line impinging jets with cross-flow at short jet-to-plate distance,” Exp. Heat Transfer, vol. 28, no. 6, pp.511–530, 2015. DOI: 10.1080/08916152.2014.913091.
   Web of Science ®Google Scholar
• Y. Xiaojun and N. Saniei, “Measurement of local heat transfer coefficient from a flat plate to a pair of circular air impinging jets,” Exp. Heat Transfer, vol. 6, pp. 111–129, 2007.
   Google Scholar
• O. Caggese, G. Gnaegi, G. Hannema, A. Terzis, and P. Ott, “Experimental and numerical investigation of a fully confined impingement round jet,” Int J Heat Mass Transf, vol. 65, pp. 873–882, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.06.043.
   Web of Science ®Google Scholar
• K. R. Ben, N. M. Saïd, B. Hervé, and P. G. Le, Effect of nozzle to plate spacing on the development of a plane jet impinging on a heated plate, Heat and Mass Transfer, vol. 53, no. 4, pp. 1305–1314, 2017. DOI: 10.1007/s00231-016-1904-4.
   Web of Science ®Google Scholar
• Y. Pan, J. Stevens, and B. W. Webb, “Effect of nozzle configuration on transport in the stagnation zone of axisymmetric, impinging free- surface liquid jets: part 2—local heat transfer,” J Heat Transfer, vol. 114, no. 4, pp.880–886, 1992. DOI: 10.1115/1.2911896.
   Web of Science ®Google Scholar
• C. Agarwal, R. Kumar, A. Gupta, and B. Chatterjee, “Effect of nozzle geometry on the rewetting of hot surface during jet impingement cooling,” Exp. Heat Transfer, vol. 27, no. 3, pp.256–275, 2014. DOI: 10.1080/08916152.2013.782375.
   Web of Science ®Google Scholar
• D. H. Lee, J. Song, and M. C. Jo, “The effects of nozzle diameter on impinging jet heat transfer and fluid flow,” J Heat Transfer, vol. 126, no. 4, pp.554–557, 2004. DOI: 10.1115/1.1777583.
   Web of Science ®Google Scholar
• H. C. Meena, S. A. Reodikar, R. Vinze, and S. V. Prabhu, “Influence of the shape of the orifice on the local heat transfer distribution between smooth flat surface and impinging incompressible air jet,” Exp. Thermal Fluid Sci, vol. 70, pp. 292–306, 2016. DOI: 10.1016/j.expthermflusci.2015.09.018.
   Web of Science ®Google Scholar
• G. Li, L. Zhu, S. Zhang, W. Guo, and Y. Zheng, “Influence of conduction heat loss on enhancing the heat transfer performance of a square flat plate with constant heat flux by an impinging jet in cross-flows,” Exp. Heat Transfer, vol. 32, no. 3, pp.219–238, 2019. DOI: 10.1080/08916152.2018.1494227.
   Web of Science ®Google Scholar
• M. Kilic, T. Calisir, and S. Baskaya, “Experimental and numerical study of heat transfer from a heated flat plate in a rectangular channel with an impinging air jet,” J. Braz. Soc. Mech. Sci. Eng, vol. 39, no. 1, pp.329–344, 2017. DOI: 10.1007/s40430-016-0521-y.
   Web of Science ®Google Scholar
• M. Attalla and M. Salem, “Heat transfer from a flat surface to an inclined impinging jet,” Heat Mass Transfer, vol. 50, no. 7, pp.915–922, 2014. DOI: 10.1007/s00231-014-1303-7.
   Web of Science ®Google Scholar
• G. C. Huang, “Investigations of heat-transfer coefficients for air flow through round jets impinging normal to a heat-transfer surface,” J Heat Transfer, vol. 85, no. 3, pp.237–243, 1963. DOI: 10.1115/1.3686082.
   Google Scholar
• M. Adimurthy and V. V. Katti, “Local distribution of wall static pressure and heat transfer on a smooth flat plate impinged by a slot air jet,” Heat Mass Transfer, vol. 53, no. 2, pp.611–623, 2017. DOI: 10.1007/s00231-016-1847-9.
   Web of Science ®Google Scholar
• V. V. Katti, S. N. Yasaswy, and S. V. Prabhu, “Local heat transfer distribution between smooth flat surface and impinging air jet from a circular nozzle at low Reynolds numbers,” Heat Mass Transfer, vol. 47, no. 3, pp.237–244, 2011. DOI: 10.1007/s00231-010-0716-1.
   Web of Science ®Google Scholar
• T. Calisir, S. Baskaya, S. Caliskan, and M. Kilic, “Numerical investigation of flow field on ribbed surfaces using impinging jets,” J. Gazi Univ. Faculty Eng. Arch, vol. 32, pp. 127–138, 2017.
   Web of Science ®Google Scholar
• R. Viskanta, “Heat transfer to impinging isothermal gas and flame jets,” Exp. Thermal Fluid Sci, vol. 6, no. 2, pp.111–134, 1993. DOI: 10.1016/0894-1777(93)90022-B.
   Web of Science ®Google Scholar
• V. Katti and S. V. Prabhu, “Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle,” Int J Heat Mass Transf, vol. 51, no. 17–18, pp.4480–4495, 2008. DOI: 10.1016/j.ijheatmasstransfer.2007.12.024.
   Web of Science ®Google Scholar
• S. W. Churchill and H. H. S. Chu, “Correlating equations for laminar and turbulent free convection from a vertical plate,” Int J Heat Mass Transf, vol. 18, no. 11, pp.1323–1329, 1975. DOI: 10.1016/0017-9310(75)90243-4.
   Web of Science ®Google Scholar
• S. J. Kline and F. Mc Clintock, “Describing uncertainities in single sample,” Mech. Eng, vol. 75, pp. 3–8, 1953.
   Google Scholar
• Q. Guo, Z. Wen, and R. Dou, “Experimental and numerical study on the transient heat-transfer characteristics of circular air-jet impingement on a flat plate,” Int J Heat Mass Transf, vol. 104, pp. 1177–1188, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.09.048.
   Web of Science ®Google Scholar
• S. B. Ingole and K. K. Sundaram, “Experimental average Nusselt number characteristics with inclined non-confined jet impingement of air for cooling application,” Exp. Thermal Fluid Sci, vol. 77, pp. 124–131, 2016. DOI: 10.1016/j.expthermflusci.2016.04.016.
   Web of Science ®Google Scholar
• M. D. Limaye, R. P. Vedula, and S. V. Prabhu, “Local heat transfer distribution on a flat plate impinged by a compressible round air jet,” Int. J. Thermal Sci, vol. 49, no. 11, pp.2157–2168, 2010. DOI: 10.1016/j.ijthermalsci.2010.06.020.
   Web of Science ®Google Scholar
• N. Gao, H. Sun, and D. Ewing, “Heat transfer to impinging round jets with triangular tabs,” Int J Heat Mass Transf, vol. 46, no. 14, pp.2557–2569, 2003. DOI: 10.1016/S0017-9310(03)00034-6.
   Web of Science ®Google Scholar
• M. Wen and K. Jang, “An impingement cooling on a flat surface by using circular jet with longitudinal swirling strips,” Int J Heat Mass Transf, vol. 46, no. 24, pp.4657–4667, 2003. DOI: 10.1016/S0017-9310(03)00302-8.
   Web of Science ®Google Scholar
• S. V. Garimella and B. Nenaydykh, “Nozzle-geometry effects in liquid jet impingement heat transfer,” Int J Heat Mass Transf, vol. 39, no. 14, pp.2915–2923, 1996. DOI: 10.1016/0017-9310(95)00382-7.
   Web of Science ®Google Scholar
• L. Huang and M. S. El-Genk, “Heat transfer of an impinging jet on a flat surface,” Int J Heat Mass Transf, vol. 37, no. 13, pp.1915–1923, 1994. DOI: 10.1016/0017-9310(94)90331-X.
   Web of Science ®Google Scholar
• R. J. Goldstein, A. I. Behbahani, and K. K. Heppelmann, “Streamwise distribution of the recovery factor and the local heat transfer coefficient to an impinging circular air jet,” Int J Heat Mass Transf, vol. 29, no. 8, pp.1227–1235, 1986. DOI: 10.1016/0017-9310(86)90155-9.
   Web of Science ®Google Scholar
• P. Hrycak, “Heat transfer from round impinging jets to a flat plate,” Int J Heat Mass Transf, vol. 26, no. 12, pp.1857–1865, 1983. DOI: 10.1016/S0017-9310(83)80156-2.
   Web of Science ®Google Scholar