187
Views
2
CrossRef citations to date
0
Altmetric
Articles

Monte Carlo simulation of gas free molecular flow in turbo molecular pump’s inlet tube

, , , , &
Pages 1261-1269 | Received 28 Feb 2018, Accepted 02 Jun 2018, Published online: 28 Jun 2018

References

  • Becker W. The turbomolecular pump, its design, operation and theory; calculation of the pumping speed for various gases and their dependence on the forepump. Vacuum. 1966;16:625–632. doi: 10.1016/0042-207X(66)91425-4
  • Bottauscio O, Casaro F, Chiampi M, et al. High-speed drag-cup induction motors for turbo-molecular pump applications. IEEE Trans Magn. 2006;42:3449–3451. doi: 10.1109/TMAG.2006.879446
  • Spagnol M, Cerruti R, Helmer J. Turbo molecular pump design for high pressure operation. J Vac Sci Technol A. 1998;16:1151–1156. doi: 10.1116/1.581250
  • Iqbal M, Wasy A, Batani D, et al. Design modification in rotor blade of turbo molecular pump. Nucl Inst Methods Phys Res A. 2012;678:88–90. doi: 10.1016/j.nima.2012.02.030
  • Osterstrom GE. A new type of turbomolecular vacuum pump bearing. J Vac Sci Technol A. 1983;1:224–227. doi: 10.1116/1.572077
  • Wang S, Ninokata H, Merzari E, et al. Numerical study of a single blade row in turbo molecular pump. Vacuum. 2009;83:1106–1117. doi: 10.1016/j.vacuum.2009.01.007
  • Hablanian MH. Engineering aspects of turbomolecular pump design. Vacuum. 2007;82:61–65. doi: 10.1016/j.vacuum.2007.04.030
  • Schneider TN, Katsimichas S, de Oliveira CRE, et al. Empirical and numerical calculations in two dimensions for predicting the performance of a single stage turbomolecular pump. J Vac Sci Technol A. 1998;16:175–180. doi: 10.1116/1.580965
  • Sengil N, Edis FO. Fast cell determination of the DSMC molecules in multi-stage turbo molecular pump design. Comput Fluids. 2011;45:202–206. doi: 10.1016/j.compfluid.2011.01.045
  • Antoniou AG, Valamontes SE, Panos CN, et al. The turbo molecular pump in molecular state. Vacuum. 1995;46:709–715. doi: 10.1016/0042-207X(94)00092-1
  • Schneider TN, Katsimichas S, de Oliveira CRE, et al. Analysis of three-dimensional single stage and two dimensional multistage models of flows in turbo molecular pumps. Vacuum. 1997;48:449–453. doi: 10.1016/S0042-207X(96)00310-7
  • Chandran M, Krishna Murthy MV. A Markov chain model for a turbo molecular pump – theory and experiments. Vacuum. 1997;48:899–911. doi: 10.1016/S0042-207X(97)00097-3
  • Katsimichas S, Goddard AJH, Lewington R, et al. General geometry calculations of one-stage molecular flow transmission probabilities for turbomolecular pumps. J Vac Sci Technol A. 1995;13:2954–2961. doi: 10.1116/1.579621
  • Wang S, Ninokata H. The pumping performances of the turbo molecular pump simulated by direct simulation Monte Carlo method. Prog Nucl Energ. 2005;47(1):664–671. doi: 10.1016/j.pnucene.2005.05.070
  • Chang YW, Jou RY. Direct simulation of pumping characteristics in a fully 3d model of a single-stage turbomolecular pump. Appl Surf Sci. 2001;169–170:772–776. doi: 10.1016/S0169-4332(00)00789-3
  • Zhang SW, Ji GZ, Han J. The positional and angular distribution of molecules flowing through cylindrical tube in free molecular flow. Phys Proc. 2012;32:513–524. doi: 10.1016/j.phpro.2012.03.595
  • Krasuski P. Angular distribution of flux at the exit of cylindrical tubes. J Vac Sci Technol A. 1987;5:2488–2492. doi: 10.1116/1.574878
  • Zhang SW, Han J, Zhang ZJ. Computer simulation of positional beaming effect of molecular flow in straight cylindrical pipeline by Monte Carlo method. ICC Sci Informat Technol. 2008;26:486–491.
  • Shevkunov SV, Vorontsov-Velyaminov PN, Martsinovski AA. A new Monte Carlo method for direct calculation of the critical size and the formation work of a microdrop. Mol Simul. 1990;5:119–132. doi: 10.1080/08927029008022126
  • Nezbeda I, Kolafa J. A new version of the insertion particle method for determining the chemical potential by Monte Carlo simulation. Mol Simul. 1991;5:391–403. doi: 10.1080/08927029108022424
  • Moučka F, Nezbeda I. The multi-particle sampling method in Monte Carlo simulations on fluids and its efficient implementations. Mol Simul. 2010;36:526–534. doi: 10.1080/08927021003692547
  • Sweatman MB, Quirke N. Modelling gas adsorption in slit-pores using Monte Carlo simulation. Mol Simul. 2001;27:295–321. doi: 10.1080/08927020108031355
  • Tuer TW, Springer GS. A test particle Monte Carlo method. Comput Fluids. 1973;1:399–417. doi: 10.1016/0045-7930(73)90006-6
  • CERN. A Monte-Carlo Simulator package developed at CERN. Geneva: CERN; [cited 2017 Nov]. Available from: http://test-molflow.web.cern.ch/.
  • O’Hanlon JF. A user’s guide to vacuum technology. 3rd ed. Hoboken (NJ): Wiley; 2003.
  • Wang XD, Zhang L, Ba DC. Calculations of pumping behavior of turbo molecular pump and error analysis. Chin J Vac Sci Technol. 2016;36:432–435.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.