Preoperative Simulation and Three-Dimensional Model for the Operative Treatment of Forearm Double Fracture: A Randomized Controlled Clinical Trial

References

• Droll KP, Perna P, Potter J, et al. Outcomes following plate fixation of fractures of both bones of the forearm in adults. J Bone Joint Surg Am. 2007;89(12):2619–2624. doi:https://doi.org/10.1016/j.injury.2018.07.021.
   PubMedGoogle Scholar
• Schulte LM, Meals CG, Neviaser RJ. Management of adult diaphyseal both-bone forearm fractures. J Am Acad Orthop Surg. (7)2014;22:437–446. doi:https://doi.org/10.5435/JAAOS-22-07-437.
   PubMed Web of Science ®Google Scholar
• Lou Y, Cai L, Wang C, et al. Comparison of traditional surgery and surgery assisted by three dimensional printing technology in the treatment of tibial plateau fractures. Int Orthopaed (Sicot). 2017;41(9):1875–1880. doi:https://doi.org/10.1007/s00264-017-3445-y.
   PubMed Web of Science ®Google Scholar
• Chen Y, Jia X, Qiang M, Zhang K, Chen S. Computer-assisted virtual surgical technology versus three-dimensional printing technology in preoperative planning for displaced three and four-part fractures of the proximal end of the humerus. J Bone Joint Surg. 2018;100(22):1960–1968. doi:https://doi.org/10.2106/JBJS.18.00477.
   PubMed Web of Science ®Google Scholar
• Takeyasu Y, Oka K, Miyake J, et al. Preoperative, computer simulation-based, three-dimensional corrective osteotomy for Cubitus varus deformity with use of a custom-designed surgical device. J Bone Joint Surg Am. 2013;95(22):e173. doi:https://doi.org/10.2106/JBJS.L.01622.
   PubMedGoogle Scholar
• Murase T, Oka K, Moritomo H, et al. Three-dimensional corrective osteotomy of malunited fractures of the upper extremity with use of a computer simulation system. J Bone Joint Surg Am. 2008;90(11):2375–2389. doi:https://doi.org/10.2106/JBJS.G.01299.
   PubMedGoogle Scholar
• Yoshii Y, Kusakabe T, Akita K, et al. Reproducibility of three dimensional digital preoperative planning for the osteosynthesis of distal radius fractures. J Orthop Res. 2017;35(12):2646–2651. doi:https://doi.org/10.1002/jor.23578.
   PubMed Web of Science ®Google Scholar
• Giannetti S, Bizzotto N, Stancati A, Santucci A. Minimally invasive fixation in tibial plateau fractures using an pre-operative and intra-operative real size 3D printing. Injury. 2017;48(3):784–788. doi:https://doi.org/10.1016/j.injury.2016.11.015.
   PubMed Web of Science ®Google Scholar
• Kim JW, Lee Y, Seo J, et al. Clinical experience with three-dimensional printing techniques in orthopedic trauma. J Orthop Sci. 2018;23(2):383–388. doi:https://doi.org/10.1016/j.jos.2017.12.010.
   PubMed Web of Science ®Google Scholar
• Hoy MB. 3D printing: making things at the library. Med Ref Serv Q. 2013;32(1):94–99. doi:https://doi.org/10.1080/02763869.2013.749139.
   PubMedGoogle Scholar
• Zeng C, Xing W, Wu Z, et al. A combination of three-dimensional printing and computer-assisted virtual surgical procedure for preoperative planning of acetabular fracture reduction. Injury. 2016;47(10):2223–2227. doi:https://doi.org/10.1016/j.injury.2016.03.015.
   PubMed Web of Science ®Google Scholar
• Liu JC, Huang BZ, Ding J, et al. Minimally invasive treatment of forearm double fracture in adult using Acumed forearm intramedullary nail: a case report. World J Clin Cases. 2021;9(11):2595–2601. doi:https://doi.org/10.12998/wjcc.v9.i11.2595.
   PubMed Web of Science ®Google Scholar
• Kuyucu E, Koçyiğit F, Ciftçi L. The importance of patient compliance in nonunion of forearm fracture. Int J Surg Case Rep. 2014;5(9):598–600. doi:https://doi.org/10.1016/j.ijscr.2014.04.033.
   PubMedGoogle Scholar
• Juergens P, Krol Z, Zeilhofer HF, et al. Computer simulation and rapid prototyping for the reconstruction of the mandible. J Oral Maxillofac Surg. 2009;67(10):2167–2170. doi:10. 1016/j.joms.2009.04.104.
   PubMed Web of Science ®Google Scholar
• Antony AK, Chen WF, Kolokythas A, et al. Use of virtual surgery and stereo lithography-guided osteotomy for mandibular reconstruction with the free fibula. Plast Reconstr Surg. 2011;128(5):1080–1084. doi:https://doi.org/10.1097/SCS.0000000000003891.
   PubMed Web of Science ®Google Scholar
• Takeyasu Y, Oka K, Miyake J, et al. Preoperative, computer simulation-based, three- dimensional corrective osteotomy for Cubitus varus deformity with use of a custom-designed surgical device. J Bone Joint Surg Am. 2013;95(22):1731–1739. doi:https://doi.org/10.2106/JBJS.L.01622.
   Google Scholar
• Dérand P, Rännar LE, Hirsch JM. Imaging, virtual planning, design, and production of patient-specific implants and clinical validation in craniomaxillofacial surgery. Craniomaxillofac Trauma Reconstr. 2012;5(3):137–144. doi:https://doi.org/10.1055/s-0032-1313357.
   PubMedGoogle Scholar
• Chen YX, Zhang K, Hao YN, et al. Research status and application prospects of digital technology in orthopaedics. Orthop Surg. 2012;4(3):131–138. doi:https://doi.org/10.1111/j.1757-7861.2012.00184.x.
   PubMedGoogle Scholar
• Fadero PE, Shah M. Three dimensional (3D) modelling and surgical planning in trauma and orthopaedics. Surgeon. 2014;12(6):328–333. doi:https://doi.org/10.1016/j.surge.2014.03.008.
   PubMed Web of Science ®Google Scholar
• Yang L, Shang XW, Fan JN, et al. Application of 3D printing in the surgical planning of trimalleolar fracture and doctor-patient communication. Biomed Res Int. 2016;2016:1–5. doi:https://doi.org/10.1155/2016/2482086.
   Google Scholar
• Arnal-Burró J, Pérez-Mañanes R, Gallo-del-Valle E, et al. Three dimensional-printed patient-specific cutting guides for femoral varization osteotomy: do it yourself. Knee. 2017;24(6):1359–1368. doi:https://doi.org/10.1016/j.knee.2017.04.016.
   PubMed Web of Science ®Google Scholar
• Pérez-Mañanes R, Burró JA, Manaute JR, et al. 3D surgical printing cutting guides for open-wedge high tibial osteotomy: do it yourself. J Knee Surg. 2016;29(8):690–695. doi:https://doi.org/10.1055/s-0036-1572412.
   PubMed Web of Science ®Google Scholar
• Hung CC, Li YT, Chou YC, et al. Conventional plate fixation method versus pre-operative virtual simulation and three-dimensional printing-assisted contoured plate fixation method in the treatment of anterior pelvic ring fracture. Int Orthop. 2019;43(2):425–431. doi:https://doi.org/10.1007/s00264-018-3963-2.
   PubMed Web of Science ®Google Scholar
• Shen S, Wang P, Li X, et al. Pre-operative simulation using a three-dimensional printing model for surgical treatment of old and complex tibial plateau fractures. Sci Rep. 2020;10(1):6044. doi:https://doi.org/10.1038/s41598-020-63219-w.
   PubMed Web of Science ®Google Scholar
• Kong L, Yang G, Yu J, et al. Surgical treatment of intra-articular distal radius fractures with the assistance of three-dimensional printing technique. Medicine (Baltimore ). 2020;99(8):e19259. doi:https://doi.org/10.1097/MD.0000000000019259.
   PubMed Web of Science ®Google Scholar
• Murat Öztürk A, Süer O, Şirintürk S, et al. A retrospective comparison of the conventional versus three-dimensional printed model-assisted surgery in the treatment of acetabular fractures. Acta Orthop Traumatol Turc. 2020;54(4):385–393. doi:https://doi.org/10.5152/j.aott.2020.19054.
   PubMed Web of Science ®Google Scholar
• Ozturk AM, Suer O, Coban I, et al. Three-dimensional printed anatomical models help in correcting foot alignment in hallux valgus deformities. Indian J Orthop. 2020;54(Suppl 1):199–209. doi:https://doi.org/10.1007/s43465-020-00110-w.
   PubMed Web of Science ®Google Scholar
• Ozturk AM, Suer O, Derin O, et al. Surgical advantages of using 3D patient-specific models in high-energy tibial plateau fractures. Eur J Trauma Emerg Surg. 2020;46(5):1183–1194. doi:https://doi.org/10.1007/s00068-020-01378-1.
   PubMed Web of Science ®Google Scholar
• Oka K, Tanaka H, Okada K, et al. Three-dimensional corrective osteotomy for malunited fractures of the upper extremity using patient-matched instruments: a prospective, multicenter, open-label, single-arm trial. J Bone Joint Surg. 2019;101(8):710–721. doi:https://doi.org/10.2106/JBJS.18.00765.
   PubMed Web of Science ®Google Scholar
• Zou Y, Han Q, Weng XS, et al. The precision and reliability evaluation of 3-dimensional printed damaged bone and prosthesis models by stereo lithography appearance. Medicine (Baltimore ). 2018;97(6):e9797. doi:https://doi.org/10.1097/MD.0000000000009797.
   PubMed Web of Science ®Google Scholar