Attribute Acceptance Sampling as a Tool for Verifying Requirements Using Monte Carlo Simulation

REFERENCES

• Bayard , R. , Cvijetic , M. , Graham , J. , Marta Morales , M. , Naff , B. ( 2007 ). A Systems Approach to Runway Incursion Prevention . Unpublished report , University of Virginia , Charlottesville : Department of Systems and Information Engineering .
   Google Scholar
• Bowker , A. H. , and Goode , H. P. ( 1952 ). Sampling Inspection by Variables , New York: McGraw-Hill .
   Google Scholar
• Box , G. E. P. , Draper , N. R. ( 2007 ). Response Surfaces, Mixtures, and Ridge Analysis, , 2nd ed. New York : Wiley .
   Google Scholar
• Creasey , R. R. , Jr. , White , K. P. , Jr. ( 2006 ). Comparison of limit standards using a sequential probability ratio test . In: Perrone , L. F. , Wieland , F. P. , Liu , J. , Lawson B. G. , Nicol , D. M. , Fujimoto R. M. , Eds. 2006 Winter Simulation Conference Proceedings , Piscataway , NJ : IEEE ; 536 – 539 .
   Google Scholar
• Creasey , R. R. , Jr. , White , K. P. , Jr. , Marks , M. B. , Waller , B. D. ( 2005 ). Determination of the “best” system that meets a limit standard . In: Kuhl , M. E. , Steiger , N. M. , Armstron , F. B. , Joines , J. A. , Eds. 2005 Winter Simulation Conference Proceedings , Piscataway , NJ : IEEE , 718 – 727 .
   Google Scholar
• DeVor , R. E. , Chang , T. , Sutherland , J. W. (1992). Statistical Quality Design and Control: Contemporary Concepts and Methods . New York : Macmillan.
   Google Scholar
• DeVore , J. L. ( 2008 ). Probability and Statistics for Engineering and the Sciences, , 7th ed. Belmont , CA : Duxbury .
   Google Scholar
• Duncan , A. J. ( 1986 ). Quality Control and Industrial Statistics, , 5th ed. Homewood , IL : Irwin .
   Google Scholar
• Fishman , G. S. ( 2006 ). A First Course in Monte Carlo . Belmont , CA : Duxbury .
   Google Scholar
• Giunta , A. A. , Wojtkiewicz , S. F. , Jr. , Eldred , M. S. ( 2003 ). Overview of Modern Design of Experiments Methods for Computational Simulations . AIAA paper 2003-0649 , Reston , VA : American Institute of Aeronautics and Astronautics .
   Google Scholar
• Grant , L. G. , Leavenworth , R. S. ( 1988 ). Statistical Quality Control, , 6th ed. New York : McGraw-Hill .
   Google Scholar
• Guenther , W. C. ( 1977 ). Sampling Inspection in Statistical Quality Control . New York : Macmillan .
   Google Scholar
• Haldar , A. , Mahadevan , S. ( 2000 ). Probability, Reliability, and Statistical Methods in Engineering Design . New York : Wiley .
   Google Scholar
• Juran , J. M. , Gryna , F. M. ( 1993 ). Quality Planning and Analysis, , 3rd ed. New York : McGraw-Hill .
   Google Scholar
• Kocis , L. , Whiten , W. J. ( 1997 ). Computational investigation of low-discrepancy sequences . ACM Transactions on Mathematical Software , 23 ( 2 ): 266 – 294 .
   Web of Science ®Google Scholar
• Law , A. ( 2007 ). Simulation Modeling and Analysis, , 4th ed. New York : McGraw-Hill .
   Google Scholar
• Mandel , J. ( 1964 ). The Statistical Analysis of Experimental Data . New York : Wiley .
   Google Scholar
• Mitra , A. ( 1993 ). Fundamentals of Quality Control and Improvement . New York : Macmillan .
   Google Scholar
• Montgomery , D. C. ( 2005 ). Introduction to Statistical Quality Control, , 5th ed. New York : Wiley .
   Google Scholar
• NIST/SEMATECH e-Handbook of Statistical Methods . ( 2008 ). Available at http://www.itl.nist.gov/div898/handbook/pmc/section2/pmc2.htm (accessed 27 February 2009) .
   Google Scholar
• Pryor , G. A. ( 2007 ). Reliability Test Planner. Available at http://www.wood.army.mil/MSBL/Reliability%20Test%20Planner/Reliability_Test_Planner.htm (accessed 27 February 2009) .
   Google Scholar
• Robinson , D. , Atcitty , C. ( 1999 ). Comparison of Quasi- and Pseudo-Monte Carlo Sampling for Reliability and Uncertainty Analysis . AIAA papers 99-1589 and 99-24882 , Reston , VA : American Institute of Aeronautics and Astronautics .
   Google Scholar
• Rubenstein , R. Y. ( 1981 ). Simulation and the Monte Carlo Method . New York : Wiley .
   Google Scholar
• Schilling , E. G. ( 1982 ). Acceptance Sampling in Quality Control . New York : Marcel Dekker .
   Google Scholar
• Smith , E. P. , Zahran , A. , Mahmoud , M. , Ye , K. ( 2003 ). Evaluation of water quality using acceptance sampling by variables . Environmetrics , 14 : 373 – 386 .
   Google Scholar
• White , K. P. , Jr. , Creasey , R. R. , Jr. ( 2007 ). Quality-Oriented Approaches for Comparing Simulation Output to a Limit Standard . Working paper, University of Virginia , Charlottesville : Department of Systems and Information Engineering .
   Google Scholar
• White , K. P. , Jr. , Johnson , K. L. , Adams , T. C. , Everline , C. , Creasey , R. R. , Jr. ( 2007 ). Best Practices and Recommended Statistical Techniques for Developing Monte Carlo Sampling Plans . Technical Assessment Report, NASA Engineering and Safety Center, Langley Research center, VA .
   Google Scholar