441
Views
5
CrossRef citations to date
0
Altmetric
Research Article

The role of the normal distribution in statistical process monitoring

ORCID Icon, ORCID Icon & ORCID Icon

References

  • Aichouni, M. , N. A. Messaoudene , and A. Al-Ghonamy . 2014. On the use of Johnson’s distribution in quality and process improvement. International Journal of Economics and Statistics 2:362–7.
  • Albin, S. L. 1990. The lognormal distribution for modeling quality data when the mean is near zero. Journal of Quality Technology 22 (2):105–10. doi: 10.1080/00224065.1990.11979221.
  • Batson, R. G. , Y. Jeong , D. J. Fonseca , and P. S. Ray . 2006. Control charts for monitoring field failure data. Quality and Reliability Engineering International 22 (7):733–55. doi: 10.1002/qre.725.
  • Borror, C. M. , D. C. Montgomery , and G. C. Runger . 1999. Robustness of the EWMA control chart to non-normality. Journal of Quality Technology 31 (3):309–16. doi: 10.1080/00224065.1999.11979929.
  • Box, G. E. P. , and D. R. Cox . 1964. An analysis of transformations. Journal of the Royal Statistical Society: Series B (Methodological) 26 (2):211–52. doi: 10.1111/j.2517-6161.1964.tb00553.x.
  • Breyfogle, F. 2009a. Non-normal data: To transform or not to transform. Quality Digest. https://www.qualitydigest.com/inside/six-sigma-column/non-normal-data-transform-or-not-transform-082409.html.
  • Breyfogle, F. 2009b. NOT transforming the data can be fatal to your analysis. Quality Digest. https://www.qualitydigest.com/inside/six-sigma-column/not-transforming-data-can-be-fatal-your-analysis-091609.html.
  • Burr, I. W. 1967. The effect of non-normality on constants for X-bar and R charts. Industrial Quality Control 23 (11):563–9.
  • Chakraborti, S. , and M. Graham . 2019a. Nonparametric statistical process control . Hoboken, NJ: John Wiley & Sons, Inc.
  • Chakraborti, S. , and M. A. Graham . 2019b. Nonparametric (distribution-free) control charts: An updated overview and some results. Quality Engineering 31 (4):523–44. doi: 10.1080/08982112.2018.1549330.
  • Chou, Y.-M. , A. M. Polansky , and R. L. Mason . 1998. Transforming non-normal data to normality in statistical process control. Journal of Quality Technology 30 (2):133–41. doi: 10.1080/00224065.1998.11979832.
  • Conover, W. J. , V. G. Tercero-Gómez , and A. E. Cordero-Franco . 2017. The sequential normal scores transformation. Sequential Analysis 36 (3):397–414. doi: 10.1080/07474946.2017.1360091.
  • Deming, W. E. 1986. Out of the crisis . Cambridge, MA: Massachusetts Institute of Technology. Center for Advanced Engineering Study.
  • Huberts, L. C. E. , M. Schoonhoven , R. Goedhart , M. D. Diko , and R. J. M. M. Does . 2018. The performance of X¯ control charts for large non-normally distributed datasets. Quality and Reliability Engineering International 34 (6):979–96. doi: 10.1002/qre.2287.
  • Johnson, N. L. 1949. Systems of frequency curves generated by methods of translation. Biometrika 36 (Pt. 1-2):149–76. doi: 10.2307/2332539.
  • JMP®, Version 15.0. 2019. SAS Institute, Cary, NC. 1989-2020.
  • Kittlitz, R. G. Jr. 1999. Transforming the exponential for SPC applications. Journal of Quality Technology 31 (3):301–8. doi: 10.1080/00224065.1999.11979928.
  • Minitab 19 Statistical Software . 2019. State College, PA. www.minitab.com.
  • Montgomery, D. C. 2013. Introduction to statistical quality control . 7th ed. Hoboken, NJ: John Wiley & Sons, Inc.
  • Moore, P. G. 1957. Normality in quality control charts. Journal of the Royal Statistical Society: Series C (Applied Statistics) 6 (3):171–9.
  • Nelson, L. S. 1994. A control chart for parts-per-million nonconforming items. Journal of Quality Technology 26 (3):239–40. doi: 10.1080/00224065.1994.11979529.
  • Pearson, E. S. 1967. Some notes on W. A. Shewhart’s influence on the application of statistical methods in Great Britain. Industrial Quality Control 24 (2):81–3.
  • Qiu, P. 2014. Introduction to statistical process control . Boca Raton, FL: CRC Press.
  • Qiu, P. , and J. Zhang . 2015. On phase II SPC in cases when normality is invalid. Quality and Reliability Engineering International 31 (1):27–35. doi: 10.1002/qre.1624.
  • Perry, M. B. 2017. Reduced-bias moment approximations in original units when using multivariate Box-Cox transformations. Quality and Reliability Engineering International 33 (2):297–306. doi: 10.1002/qre.2004.
  • Perry, M. B. 2018a. Approximate prediction intervals in the original units when fitting models using data transformations. Quality and Reliability Engineering International 34 (1):53–65. doi: 10.1002/qre.2235.
  • Perry, M. B. 2018b. Prediction intervals for the original response when using Manly’s exponential transformations. Quality Engineering 30 (2):195–211. doi: 10.1080/08982112.2017.1357827.
  • Perry, M. B. , and M. L. Walker . 2015. A prediction interval estimator for the original response when using Box-Cox transformations. Journal of Quality Technology 47 (3):278–97. doi: 10.1080/00224065.2015.11918133.
  • Ramírez, B. S. , and J. G. Ramírez . 2018. Douglas Montgomery’s introduction to statistical quality control; A JMP® companion . Cary, NC: SAS Institute, Inc., SAS Campus Drive.
  • Razali, N. M. , and Y. B. Wah . 2011. Power comparisons of Shapiro-Wilk, Kolmogorov-Smirnov, Lillefors and Anderson-Darling tests. Journal of Statistical Modeling and Analytics 2 (1):21–33.
  • Sakia, R. M. 1992. The Box-Cox transformation technique: A review. The Statistician 41 (2):169–78. doi: 10.2307/2348250.
  • Santiago, E. , and J. Smith . 2013. Control charts based on the exponential distribution: Adapting runs rules for the t chart. Quality Engineering 25 (2):85–96. doi: 10.1080/08982112.2012.740646.
  • Schilling, E. G. , and P. R. Nelson . 1976. The effect of non-normality on the control limits of. X¯ charts .  Journal of Quality Technology 8 (4):183–8. doi: 10.1080/00224065.1976.11980743.
  • Shewhart, W. A. 1931. Economic control of quality of manufactured product . New York, NY: D. Van Nostrand (Republished in 1980 by the American Society for Quality Control, Milwaukee, WI).
  • Shewhart, W. A. 1939. Statistical method from the viewpoint of quality control . Washington, DC: Graduate School of the Department of Agriculture (Republished in 1986 by Dover Publications, Inc., Mineola, NY.).
  • Wheeler, D. J. 1991. Shewhart’s charts: Myths, facts, and competitors , 533–8. Milwaukee, WI: ASQC Quality Congress Transactions.
  • Wheeler, D. J. 1995. Advanced topics in statistical process control: The power of Shewhart’s charts . Knoxville, TN: SPC Press, Inc.
  • Wheeler, D. J. 2009a. Do you have leptokurtophobia? Quality Digest. https://www.qualitydigest.com/inside/six-sigma-column/do-you-have-leptokurtophobia-080509.html.
  • Wheeler, D. J. 2009b. Transforming the data can be fatal to your analysis. Quality Digest. https://www.qualitydigest.com/inside/healthcare-column/transforming-data-can-be-fatal-your-analysis-090309.html.
  • Wheeler, D. J. 2009c. Avoiding statistical jabberwocky: The last column in the debate between Donald Wheeler and Forrest Breyfogle. Quality Digest. https://www.qualitydigest.com/inside/twitter-ed/avoiding-statistical-jabberwocky.html.
  • Wheeler, D. J. 2010. Are you sure we don’t need normally distributed data? More about the misuses of probability theory. Quality Digest. https://www.qualitydigest.com/inside/six-sigma-column/are-you-sure-we-don-t-need-normally-distributed-data-110110.html.
  • Wheeler, D. J. 2019. The normality myth. Quality Digest. https://www.qualitydigest.com/inside/statistics-column/normality-myth-090819.html.
  • Woodall, W. H. , and F. W. Faltin . 2019. Rethinking control chart design and evaluation. Quality Engineering 31 (4):596–605. doi: 10.1080/08982112.2019.1582779.
  • Yazici, B. , and S. Yolacan . 2007. A comparison of various tests of normality. Journal of Statistical Computation and Simulation 77 (2):175–83. doi: 10.1080/10629360600678310.
  • Yeo, I. K. , and R. A. Johnson . 2000. A new family of power transformations to improve normality or symmetry. Biometrika 87 (4):954–9. doi: 10.1093/biomet/87.4.954.
  • Zwetsloot, I. , and W. H. Woodall . 2021. A review of some sampling and aggregation strategies for basic statistical process monitoring (with discussion). Journal of Quality Technology 53 (1):1–16. doi: 10.1080/00224065.2019.1611354.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.