References
- Zhang Y, Yao N, Wang F, et al. A novel in situ self foaming method for the synthesis of porous calcium metaphosphate biomaterials. RSC Adv. 2014;4:60007–60016.10.1039/C4RA11097H
- van Tienen TG, Heijkants R, Buma P, et al. Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes. Biomaterials. 2002;23:1731–1738.10.1016/S0142-9612(01)00280-0
- Yang SF, Leong KF, Du ZH, et al. The design of scaffolds for use in tissue engineering. Part I. Traditional factors. Tissue Eng. 2001;7:679–689.10.1089/107632701753337645
- Kuboki Y, Takita H, Kobayashi D, et al. BMP-induced osteogenesis on the surface of hydroxyapatite with geometrically feasible and nonfeasible structures: topology of osteogenesis. J. Biomed. Mater. Res. 1998;39:190–199.10.1002/(ISSN)1097-4636
- Service RF . Tissue engineers build new bone. Science. 2000;289:1498–1500.
- Jones AC, Arns CH, Hutmacher DW, et al. The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth. Biomaterials. 2009;30:1440–1451.10.1016/j.biomaterials.2008.10.056
- Crane GM, Ishaug SL, Mikos AG. Bone tissue engineering. Nat. Med. 1995;1:1322–1324.10.1038/nm1295-1322
- Ishaug-Riley SL, Crane-Kruger GM, Yaszemski MJ, et al. Three-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers. Biomaterials. 1998;19:1405–1412.10.1016/S0142-9612(98)00021-0
- Silva MMCG, Cyster LA, Barry JJA, et al. The effect of anisotropic architecture on cell and tissue infiltration into tissue engineering scaffolds. Biomaterials. 2006;27:5909–5917.10.1016/j.biomaterials.2006.08.010
- Ma PX, Zhang RY. Microtubular architecture of biodegradable polymer scaffolds. J. Biomed. Mater. Res. 2001;56:469–477.10.1002/(ISSN)1097-4636
- Chang BS, Lee CK, Hong KS, et al. Osteoconduction at porous hydroxyapatite with various pore configurations. Biomaterials. 2000;21:1291–1298.10.1016/S0142-9612(00)00030-2
- Wang H, Li Y, Zuo Y, et al. Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering. Biomaterials. 2007;28:3338–3348.10.1016/j.biomaterials.2007.04.014
- Huanan W, Yi Z, Qin Z, et al. Nano-hydroxyapatite/polyamide66 composite tissue-engineering scaffolds with anisotropy in morphology and mechanical behaviors. J. Polym. Sci. A Polym. Chem. 2009;47:658–669.
- Sang P-M, Zhang M, Chen B-H, et al. Radiological study on the n-HA/PA66 cage used in the transforaminal lumbar interbody fusion. Zhongguo Gu Shang. 2014;27:654–657.
- Xiong Y, Ren C, Zhang B, et al. Analyzing the behavior of a porous nano-hydroxyapatite/polyamide 66 (n-HA/PA66) composite for healing of bone defects. Int. J. Nanomed. 2014;9:485–494.10.2147/IJN
- You F, Li Y, Zou Q, et al. Fabrication and osteogenesis of a porous nanohydroxyapatite/polyamide scaffold with an anisotropic architecture. ACS Biomat. Sci. Eng. 2015;1:825–833.
- Spicer PP, Kretlow JD, Young S, et al. Evaluation of bone regeneration using the rat critical size calvarial defect. Nat. Protoc. 2012;7:1918–1929.10.1038/nprot.2012.113
- Zhang R, Ma PX. Poly(alpha-hydroxyl acids)/hydroxyapatite porous composites for bone- tissue engineering. I. Preparation and morphology. J. Biomed. Mater. Res. 1999;44:446–455.10.1002/(ISSN)1097-4636
- Sánchez-Salcedo S, Nieto A, Vallet-Regí M. Hydroxyapatite/β-tricalcium phosphate/agarose macroporous scaffolds for bone tissue engineering. Chem. Eng. J. 2008;137:62–71.10.1016/j.cej.2007.09.011
- Rose FR, Cyster LA, Grant DM, et al. In vitro assessment of cell penetration into porous hydroxyapatite scaffolds with a central aligned channel. Biomaterials. 2004;25:5507–5514.10.1016/j.biomaterials.2004.01.012
- Taylor DF, Smith FB. Porous methyl methacrylate as an implant material. J. Biomed. Mater. Res. 1972;6:467–479.10.1002/(ISSN)1097-4636
- Jidong L, Yi M, Yi Z, et al. In vitro and in vivo evaluation of a nHA/PA66 composite membrane for guided bone regeneration. J. Biomater. Sci. Polym. Ed. 2011;22:263–275.
- Oh SH, Park IK, Kim JM, et al. In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method. Biomaterials. 2007;28:1664–1671.10.1016/j.biomaterials.2006.11.024
- Whang K, Healy KE, Elenz DR, et al. Engineering bone regeneration with bioabsorbable scaffolds with novel microarchitecture. Tissue Eng. 1999;5:35–51.10.1089/ten.1999.5.35