References
- Sun Y, Cheng S, Lu W, et al. Electrospun fibers and their application in drug controlled release, biological dressings, tissue repair, and enzyme immobilization. RSC Adv. 2019;9(44):25712–25729..
- Saeed SM, Mirzadeh H, Zandi M, et al. Designing and fabrication of curcumin loaded PCL/PVA multi-layer nanofibrous electrospun structures as active wound dressing. Prog Biomater. 2017;6(1–2):39–48..
- Saallah S, Naim MN, Lenggoro IW, et al. Immobilisation of cyclodextrin glucanotransferase into polyvinyl alcohol (PVA) nanofibres via electrospinning. Biotechnol Rep (Amst). 2016;10:44–48..
- Xiao M, Chery J, Frey MW. Functionalization of electrospun poly(vinyl alcohol) (PVA) nanofiber membranes for selective chemical capture. ACS Appl Nano Mater. 2018;1(2):722–729..
- Abd El-Aziz AM, El-Maghraby A, Taha NA. Comparison between polyvinyl alcohol (PVA) nanofiber and polyvinyl alcohol (PVA) nanofiber/hydroxyapatite (HA) for removal of Zn2+ ions from wastewater. Arab J Chem. 2017;10(8):1052–1060..
- Arafat MT, Mahmud MM, Wong SY, et al. PVA/PAA based electrospun nanofibers with pH-responsive color change using bromothymol blue and on-demand ciprofloxacin release properties. J Drug Deliv Sci Technol. 2021;61:102297..
- Han X, Huo P, Ding Z, et al. Preparation of lutein-loaded PVA/sodium alginate nanofibers and investigation of its release behavior. Pharmaceutics. 2019;11(9):449–411..
- Satpathy A, Pal A, Sengupta S, et al. Bioactive nano-hydroxyapatite doped electrospun PVA-chitosan composite nanofibers for bone tissue engineering applications. J Indian Inst Sci. 2019;99(3):289–302..
- Oktay B, Kayaman-Apohan N, Erdem-Kuruca S. Fabrication of nanofiber mats from electrospinning of functionalized polymers. IOP Conf Ser: Mater Sci Eng. 2014;64:012011–012016..
- Duru Kamaci U, Peksel A. Enhanced catalytic activity of immobilized phytase into polyvinyl alcohol-sodium alginate based electrospun nanofibers. Catal Lett. 2021;151(3):821–831..
- Teixeira MA, Amorim MTP, Felgueiras HP. Poly(vinyl alcohol)-based nanofibrous electrospun scaffolds for tissue engineering applications. Polymers. 2019;12(1):7..
- Sebe I, Ostorhazi E, Fekete A, et al. Polyvinyl alcohol nanofiber formulation of the designer antimicrobial peptide APO sterilizes Acinetobacter baumannii-infected skin wounds in mice. Amino Acids. 2016;48(1):203–211..
- Lou L, Subbiah S, Smith E, et al. Functional PVA/VB2/TiO2 nanofiber webs for controlled drug delivery. ACS Appl Bio Mater. 2019;2(12):5916–5929..
- Safaee-Ardakani MR, Hatamian-Zarmi A, Sadat SM, et al. Electrospun schizophyllan/polyvinyl alcohol blend nanofibrous scaffold as potential wound healing. Int J Biol Macromol. 2019;127:27–38..
- Sharma D, Satapathy BK. Performance evaluation of electrospun nanofibrous mats of polylactic acid (PLA)/poly (ε-caprolactone) (PCL) blends. Mater Today Proc. 2019;19:188–195..
- Sharma D, Satapathy BK. Mechanical properties of aliphatic polyester-based structurally engineered composite patches. Macromol Symp. 2019;384(1):1800153..
- Ulery BD, Nair LS, Laurencin CT. Biomedical applications of biodegradable polymers. J Polym Sci B Polym Phys. 2011;49(12):832–864..
- Sill TJ, Recum HA. Electrospinning: applications in drug delivery and tissue engineering. Biomaterials. 2008;29(13):1989–1906..
- Gupta KC, Haider A, Choi Y, et al. Nanofibrous scaffolds in biomedical applications. Biomater Res. 2014;18:1–11. https://doi.org/10.1186/2055-7124-18-5.
- Jamuna-Thevi K, Suleiman MJ, Sabri SN. The in vitro degradation of PLGA/nanoapatite/lauric acid composite membrane: a comparative study in phosphate buffer saline and simulated body fluid. Macromol Symp. 2017;371(1):101–106..
- Karataş A, Hilal Algan A, Pekel-Bayramgil N, et al. Ofloxacin loaded electrospun fibers for ocular drug delivery: effect of formulation variables on fiber morphology and drug release. Curr Drug Deliv. 2016;13(3):433–443..
- Rezaee S, Moghbeli MR. Crosslinked electrospun poly (vinyl alcohol) nanofibers coated by antibacterial copper nanoparticles. Iran J Chem Eng. 2014;11:45–58.
- Zhang K, Mohanty AK, Misra M. Fully biodegradable and biorenewable ternary blends from polylactide, poly(3-hydroxybutyrate-co-hydroxyvalerate) and poly(butylene succinate) with balanced properties. ACS Appl Mater Interfaces. 2012;4(6):3091–3101..
- Hou J, Wang Y, Xue H, et al. Biomimetic growth of hydroxyapatite on electrospun CA/PVP core-shell nanofiber membranes. Polymers. 2018;10(9):1032..
- Yang G, Li X, He Y, et al. From nano to micro to macro: electrospun hierarchically structured polymeric fibers for biomedical applications. Prog Polym Sci. 2018;81:80–113..
- Sharma D, Satapathy BK. Optimization and physical performance evaluation of electrospun nanofibrous mats of PLA, PCL and their blends. J Ind Text. 2020. https://doi.org/10.1177/1528083720944502.
- Sharma D, Saha D, Satapathy BK. Structurally optimized suture resistant polylactic acid (PLA)/poly (є-caprolactone) (PCL) blend based engineered nanofibrous mats. J Mech Behav Biomed Mater. 2021;116:104331..
- Biswal AK, Usmani M, Ahammad SZ, et al. Unveiling the slow release behavior of hollow particles with prolonged antibacterial activity. J Mater Sci. 2018;53(8):5942–5957..
- Parthipan AK, Gupta N, Pandey K, et al. One-step fabrication of bicompartmental microparticles as a dual drug delivery system for Parkinson’s disease management. J Mater Sci. 2019;54(1):730–744..
- Trang Mai TT, Thuy Nguyen TT, Le QD, et al. A novel nanofiber Cur-loaded polylactic acid constructed by electrospinning. Adv Nat Sci: Nanosci Nanotechnol. 2012;3(2):025014..
- Mamidi N, Romo IL, Barrera EV, et al. High throughput fabrication of curcumin embedded gelatin-polylactic acid forcespun fiber-aligned scaffolds for the controlled release of curcumin. MRS Commun. 2018;8(4):1395–1403..
- Merrell JG, Mclaughlin SW, Tie L, et al. Curcumin loaded poly(ε-caprolactone) nanofibers: diabetic wound dressing with antioxidant and anti-inflammatory properties. Clin Exp Pharmacol Physiol. 2009;36(12):1149–1156..
- Hoang MS. Fabrication of curcumin loaded nano polycaprolactone/chitosan nonwoven fabric via electrospinning technique. JST. 2018;55(1B):99..
- Aytac Z, Uyar T. Core-shell nanofibers of curcumin/cyclodextrin inclusion complex and polylactic acid: enhanced water solubility and slow release of curcumin. Int J Pharm. 2017;518(1–2):177–184..
- Zhou J, Wang Q, Lu H, et al. Preparation and characterization of electrospun polyvinyl alcoholstyrylpyridinium/β-cyclodextrin composite nanofibers: release behavior and potential use for wound dressing. Fibers Polym. 2016;17(11):1835–1841..
- Liu Y, Liang X, Zhang R, et al. Fabrication of electrospun polylactic acid/cinnamaldehyde/β-cyclodextrin fibers as an antimicrobialwound dressing. Polymers. 2017;9(12):464..
- Razzaq A, Khan ZU, Saeed A, et al. Development of cephradine-loaded gelatin/polyvinyl alcohol electrospun nanofibers for effective diabetic wound healing: in-vitro and in-vivo assessments. Pharmaceutics. 2021;13(3):349.
- Celebioglu A, Topuz F, Uyar T. Water-insoluble hydrophilic electrospun fibrous mat of cyclodextrin–epichlorohydrin polymer as highly effective sorbent. ACS Appl Polym Mater. 2019;1(1):54–62..
- Kaur N, Garg T, Goyal AK, et al. Formulation, optimization and evaluation of curcumin-β-cyclodextrin-loaded sponge for effective drug delivery in thermal burns chemotherapy. Drug Deliv. 2016;23(7):2245–2254..
- Guo S. Encapsulation of curcumin into β-cyclodextrins inclusion: a review. E3S Web Conf. 2019;131:01100–01107..
- Chen J, Qin X, Zhong S, et al. Characterization of curcumin/cyclodextrin polymer inclusion complex and investigation on its antioxidant and antiproliferative activities. Molecules. 2018;23(5):1179..
- Dott C, Tyagi C, Tomar LK, et al. A mucoadhesive electrospun nanofibrous matrix for rapid oramucosal drug delivery. J Nanomater. 2013;2013:1–19..
- Sun XZ, Williams GR, Hou XX, et al. Electrospun curcumin-loaded fibers with potential biomedical applications. Carbohydr Polym. 2013;94(1):147–153..
- Elkasaby M, Hegab HA, Mohany A, et al. Modeling and optimization of electrospinning of polyvinyl alcohol (PVA). Adv Polym Technol. 2018;37(6):2114–2122..
- Nazir A, Khenoussi N, Schacher L, et al. Using the Taguchi method to investigate the effect of different parameters on mean diameter and variation in PA-6 nanofibres produced by needleless electrospinning. RSC Adv. 2015;5(94):76892–76897..
- Wu CM, Hsu CH, Su CI, et al. Optimizing parameters for continuous electrospinning of polyacrylonitrile nanofibrous yarn using the Taguchi method. J Ind Text. 2018;48(3):559–579..
- Abdelhady SS, Zoalfakar SH, Agwa MA, et al. Electrospinning process optimization for nylon 6,6/epoxy hybrid nanofibers by using Taguchi method. Mater Res Express. 2019;6(9):095314..
- Amini N, Kalaee M, Mazinani S, et al. Morphological optimization of electrospun polyacrylamide/MWCNTs nanocomposite nanofibers using Taguchi’s experimental design. Int J Adv Manuf Technol. 2013;69(1–4):139–146..
- Balan KK, Sivanesan V, Moorthy N, et al. Effect of thickness of mat and testing parameters on tensile strength variability of electrospun nanofibrous mat. Mater Today Proc. 2016;3(6):1320–1329..
- Wong C, Yoganarasimha S, Carrico C, et al. Incorporation of fibrin matrix into electrospun membranes for periodontal wound healing. Bioengineering. 2019;6(3):57..
- Chou S, Woodrow KA. Relationships between mechanical properties and drug release from electrospun fibers of PCL and PLGA blends. J Mech Behav Biomed Mater. 2017;65:724–733..
- Huang CY, Hu KH, Wei ZH. Comparison of cell behavior on pva/pva-gelatin electrospun nanofibers with random and aligned configuration. Sci Rep. 2016;6:37960–37968..
- Linh NTB, Min YK, Song HY, et al. Fabrication of polyvinyl alcohol/gelatin nanofiber composites and evaluation of their material properties. J Biomed Mater Res B Appl Biomater. 2010;95(1):184–191..
- Şimşek M. PVA nanofibers including biopolymer-grafted copolymer for potential biomedical applications. HJBC. 2018;3(46):381–389..
- Mangolim CS, Moriwaki C, Nogueira AC, et al. Curcumin-β-cyclodextrin inclusion complex: stability, solubility, characterisation by FT-IR, FT-Raman, X-ray diffraction and photoacoustic spectroscopy, and food application. Food Chem. 2014;153:361–370..
- Lu L, Wu D, Zhang M, et al. Fabrication of polylactide/poly(ε-caprolactone) blend fibers by electrospinning: morphology and orientation. Ind Eng Chem Res. 2012;51(9):3682–3691..
- Mohammad Khanlou H, Chin Ang B, Talebian S, et al. Electrospinning of polymethyl methacrylate nanofibers: optimization of processing parameters using the Taguchi design of experiments. Text Res J. 2015;85(4):356–368..
- Uvaraja VC, Natarajan N, Rajendran I, et al. Tribological Behavior of novel hybrid composite materials using Taguchi technique. J Tribol. 2013;135:1–12. https://doi.org/10.1115/1.4023147.
- El-Shekeil YA, Sapuan SM, Azaman MD, et al. Optimization of blending parameters and fiber size of kenaf-bast-fiber-reinforced the thermoplastic polyurethane composites by Taguchi method. Adv Mater Sci Eng. 2013;2013:1–5..
- Koosha M, Mirzadeh H. Electrospinning, mechanical properties, and cell behavior study of chitosan/PVA nanofibers. J Biomed Mater Res A. 2015;103(9):3081–3093..
- Fallah M, Bahrami SH, Ranjbar-Mohammadi M. Fabrication and characterization of PCL/gelatin/curcumin nanofibers and their antibacterial properties. J Ind Text. 2016;46(2):562–577..