References
- Nepa P, Rogier H. Wearable antennas for off-body radio links at VHF and UHF bands:challenges, the state of the art, and future trends below 1 GHz. IEEE Antennas Propag Mag. 2015;57:30–52.
- Rais NHM, Soh PJ, Malek F, et al. A review of wearable antenna. Antennas & Propagation Conference; 2009; Loughborough (UK), p. 225–228.
- Gao S, Xiao S, Zhu H, et al. 2.45 GHz body-worn planar monopole antenna and its application in body-worn mimo system. J Electromagn Waves Appl. 2011;25:661–671.10.1163/156939311794827212
- Khaleel HR. Design and fabrication of compact inkjet printed antennas for integration within flexible and wearable electronics. IEEE Trans Compon Packag Manuf Technol. 2014;4:1722–1728.10.1109/TCPMT.2014.2352254
- Ivsic B, Bonefacic D, Bartolic J. Considerations on embroidered textile antennas for wearable applications. IEEE Antennas Wireless Propag Lett. 2013;12:1708–1711.10.1109/LAWP.2013.2297698
- Chen SJ, Kaufmann T, Chinthana D, et al. A modular textile antenna design using snap-on buttons for wearable applications. IEEE Trans Antennas Propag. 2016;64:894–903.10.1109/TAP.2016.2517673
- Trajkovikj J, Skrivervik AK. Diminishing SAR for wearable UHF antennas. IEEE Antennas Wireless Propag Lett. 2015;14:1530–1533.10.1109/LAWP.2014.2374423
- Casula GA, Michel A, Nepa P, et al. Robustness of wearable UHF-band PIFAs to human-body proximity. IEEE Trans Antennas Propag. 2016;64:2050–2055.10.1109/TAP.2016.2537368
- https://www.cst.com
- Jalil ME, Rahim MKA, Samsuri NA, et al. On-body investigation of dual band diamond textile antenna for wearable applications at 2.45 GHz and 5.8 GHz. European Conference on Antennas and Propagation (EuCAP); 2013, p. 414–417.
- IEEE recommended practice for measurements and computations of radio frequency electromagnetic fields with respect to human exposure to such fields, 100 kHz 300 GHz, IEEE Std C95.3-2002, No. 4, p. 1–126, IEEE-SA Standards Board; 2002.
- IEC/IEEE draft standard for determining the peak spatial average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz – 6 GHz. Part 1: general requirements for using the finite difference time domain (fdtd) method for SAR calculations, P62704-1/D2; 2013.
- Bluetooth Specification version 5.0 | Vol. 2, Part A. Available from: https://www.bluetooth.com