References
- Noor AK, Peters JM. Thermomechanical buckling of multilayered composite plates. J. Eng. Mech. 1992;118:351–366.10.1061/(ASCE)0733-9399(1992)118:2(351)
- Yin W-L. Thermomechanical buckling of delaminated composite laminates. Int. J. Solids Struct. 1998;35:2639–2653.10.1016/S0020-7683(97)00191-1
- Shukla K, Nath Y, Kreuzer E. Buckling and transient behaviour of layered composite plates under thermomechanical loading. ZAMM. 2005;85:163–175.10.1002/(ISSN)1521-4001
- Shu X, Sun L. Thermomechanical buckling of laminated composite plates with higher-order transverse shear deformation. Comput. Struct. 1994;53:1–7.
- Dafedar J, Desai Y. Thermomechanical buckling of laminated composite plates using mixed, higher-order analytical formulation. J. Appl. Mech. 2002;69:790–799.10.1115/1.1490372
- Pandey R, Shukla K, Jain A. Thermoelastic stability analysis of laminated composite plates: An analytical approach. Commun. Nonlinear Sci. Numer. Simul. 2009;14:1679–1699.10.1016/j.cnsns.2008.02.010
- Bottega W. Sling-shot buckling of composite structures under thermo-mechanical loading. Int. J. Mech. Sci. 2006;48:568–578.10.1016/j.ijmecsci.2005.12.001
- Wu Z, Chen W. Thermomechanical buckling of laminated composite and sandwich plates using global–local higher order theory. Int. J. Mech. Sci. 2007;49:712–721.10.1016/j.ijmecsci.2006.10.006
- Shariyat M. A generalized high-order global–local plate theory for nonlinear bending and buckling analyses of imperfect sandwich plates subjected to thermo-mechanical loads. Compos. Struct. 2010;92:130–143.10.1016/j.compstruct.2009.07.007
- Barut A, Madenci E. A complex potential-variational formulation for thermo-mechanical buckling analysis of flat laminates with an elliptic cutout. Compos. Struct. 2010;92:2871–2884.10.1016/j.compstruct.2010.04.013
- Singh S, Singh J, Shukla K. Buckling of laminated composite plates subjected to mechanical and thermal loads using meshless collocations. J. Mech. Sci. Technol. 2013;27:327–336.10.1007/s12206-012-1249-y
- Fazzolari FA, Carrera E. Accurate free vibration analysis of thermo-mechanically pre/post-buckled anisotropic multilayered plates based on a refined hierarchical trigonometric Ritz formulation. Compos. Struct. 2013;95:381–402.10.1016/j.compstruct.2012.07.036
- Fazzolari FA, Carrera E. Thermo-mechanical buckling analysis of anisotropic multilayered composite and sandwich plates by using refined variable-kinematics theories. J. Therm. Stresses. 2013;36:321–350.10.1080/01495739.2013.770642
- Nali P, Carrera E. Accurate buckling analysis of composite layered plates with combined thermal and mechanical loadings. J. Therm. Stresses. 2013;36:1–18.10.1080/01495739.2012.663679
- Flaggs DL, Vinson JR. Hydrothermal effects on the buckling of laminated composite plates. Fibre Sci Technol. 1978;11:353–365.10.1016/0015-0568(78)90031-3
- Sai Ram K, Sinha P. Hygrothermal effects on the buckling of laminated composite plates. Compos Struct. 1992;21:233–247.
- Patel B, Ganapathi M, Makhecha D. Hygrothermal effects on the structural behaviour of thick composite laminates using higher-order theory. Compos. Struct. 2002;56:25–34.10.1016/S0263-8223(01)00182-9
- Singh B, Verma V. Hygrothermal effects on the buckling of laminated composite plates with random geometric and material properties. J. Reinf. Plast. Compos. 2008;28:409–427.
- Shen H-S. Hygrothermal effects on the postbuckling of shear deformable laminated plates. Int. J. Mech. Sci. 2001;43:1259–1281.10.1016/S0020-7403(00)00058-8
- Noor AK, Peters JM. Postbuckling of multilayered composite plates subjected to combined axial and thermal loads. Finite Elem. Anal. Des. 1992;11:91–104.10.1016/0168-874X(92)90044-D
- Shen H-S, Williams F. Post-buckling analysis of imperfect laminated plates under combined axial and thermal loads. Comput. Mech. 1996;17:226–233.10.1007/BF00364825
- Shen H-S, Sun G, Williams F. Thermomechanical postbuckling analysis of imperfect laminated plates on two-parameter elastic foundations. Compos. Struct. 1996;34:325–338.10.1016/0263-8223(95)00153-0
- Shukla K, Nath Y. Analytical solution for buckling and post-buckling of angle-ply laminated plates under thermomechanical loading. Int. J. Non-Linear Mech. 2001;36:1097–1108.10.1016/S0020-7462(00)00074-3
- Shen H-S. Thermomechanical post-buckling analysis of imperfect laminated plates using a higher-order shear-deformation theory. Comput Struct. 1998;66:395–409.10.1016/S0045-7949(97)00089-8
- Shen H-S. Thermomechanical postbuckling of imperfect shear deformable laminated plates on elastic foundations. Comput. Methods Appl. Mech. Eng. 2000;189:761–784.10.1016/S0045-7825(99)00328-X
- Shen H-S, Xiang Y. Thermomechanical postbuckling of unilaterally constrained shear deformable laminated plates with temperature-dependent properties. Int. J. Non-Linear Mech. 2006;41:1161–1173.10.1016/j.ijnonlinmec.2006.11.008
- Girish J, Ramachandra L. Thermomechanical postbuckling analysis of symmetric and antisymmetric composite plates with imperfections. Compos. Struct. 2005;67:453–460.10.1016/j.compstruct.2004.02.004
- Ge Y, Yuan W, Dawe D. Thermomechanical postbuckling of composite laminated plates by the spline finite strip method. Compos. Struct. 2005;71:115–129.10.1016/j.compstruct.2004.12.003
- Shen H-S. Postbuckling of shear deformable laminated plates with piezoelectric actuators under complex loading conditions. Int. J. Solids Struct. 2001;38:7703–7721.10.1016/S0020-7683(01)00120-2
- Kapuria S, Achary G. Nonlinear zigzag theory for electrothermomechanical buckling of piezoelectric composite and sandwich plates. Acta Mech. 2006;184:61–76.10.1007/s00707-006-0318-7
- Shen H-S, Hong Zhu Z, Compressive and thermal postbuckling behaviors of laminated plates with piezoelectric fiber reinforced composite actuators. Appl. Math. Model. 2011;35: 1829–1845.10.1016/j.apm.2010.10.013
- Bohlooly M, Mirzavand B. A closed-form solution for thermal buckling of cross-ply piezolaminated plates. Int. J. Struct. Stab. Dyn. 2016. Article ID 1450112 (20 p).
- Bohlooly M, Mirzavand B. Closed form solutions for buckling and postbuckling analysis of imperfect laminated composite plates with piezoelectric actuators. Composites Part B. 2015;72:21–29.10.1016/j.compositesb.2014.10.049
- Reddy JN. Mechanics of laminated composite plates and shells: theory and analysis. CRC Press, Boca Raton, FL; 2004.
- Sofiyev A. Thermoelastic stability of functionally graded truncated conical shells. Compos. Struct. 2007;77:56–65.10.1016/j.compstruct.2005.06.004
- Brush DO, Almroth BO Buckling of bars, plates, and shells. Vol. 6. McGraw-Hill: New York, NY; 1975.
- Mirzavand B, Eslami M. A closed-form solution for thermal buckling of piezoelectric FGM rectangular plates with temperature-dependent properties. Acta Mech. 2011;218:87–101.10.1007/s00707-010-0402-x
- Sofiyev A. Torsional buckling of cross-ply laminated orthotropic composite cylindrical shells subject to dynamic loading. Eur J Mech-A. Solids. 2003;22:943–951.10.1016/S0997-7538(03)00090-1
- Mirzavand B, Eslami M, Reddy J. Dynamic thermal postbuckling analysis of shear deformable piezoelectric-FGM cylindrical shells. J. Therm. Stresses. 2013;36:189–206.10.1080/01495739.2013.768443
- Kundu CK, Han J-H. Vibration and post-buckling behavior of laminated composite doubly curved shell structures. Adv. Compos. Mater. 2009;18:21–42.10.1163/156855108X385320
- Suemasu H. Compressive buckling behavior of laminates with interleaves of very low elastic modulus. Adv. Compos. Mater. 1998;7:23–33.10.1163/156855198X00020
- Suemasu H, Kawauchi M, Gozu K, et al. Effects of a free edge delamination on buckling of rectangular composite plates with two fixed loading and one simply-supported side edges. Adv. Compos. Mater. 1996;5:185–200.10.1163/156855196X00239
- Aydogdu M. A new shear deformation theory for laminated composite plates. Compos. Struct. 2009;89:94–101.10.1016/j.compstruct.2008.07.008
- Grover N Analysis of sandwich and laminated composite plates [ M. Tech thesis]. Motilal Nehru National Institute of Technology, Allahabad; 2011.
- Whitney J, Ashton J. Effect of environment on the elastic response of layered composite plates. AIAA J. 1971;9:1708–1713.10.2514/3.49976