Simulating the induction heating of cross-ply C/PEKK laminates – sensitivity and effect of material variability

References

• Thermoplastic fuselage demonstrator [ Online]. [cited 2019 Apr 10]. Available from: http://www.jeccomposites.com/knowledge/international-composites-news/thermoplastic-fuselage-demonstrator
   Google Scholar
• Gardiner G. Thermoplastic composite demonstrators — EU roadmap for future airframes. Compos World [ Online]. [cited 28 May 2018]. Available from: https://www.compositesworld.com/articles/thermoplastic-composite-demonstrators-eu-roadmap-for-future-airframes-
   Google Scholar
• Ishii K, Todoroki A, Mizutani Y, et al. Bending fracture rule for 3D-printed curved continuous-fiber composite. Adv Compos Mater. 2019;28(4):383–395.
   Web of Science ®Google Scholar
• Shiratori H, Todoroki A, Ueda M, et al. Mechanism of folding a fiber bundle in the curved section of 3D printed carbon fiber reinforced plastics. Adv Compos Mater. 2020;29(3):247–257.
   Web of Science ®Google Scholar
• Todoroki A, Oasada T, Mizutani Y, et al. Tensile property evaluations of 3D printed continuous carbon fiber reinforced thermoplastic composites. Adv Compos Mater. 2020;29(2):147–162.
   Web of Science ®Google Scholar
• Ageorges C, Ye L, Hou M. Advances in fusion bonding techniques for joining thermoplastic thermoplastic matrix composites: a review. Compos Part A. 2001;32:839–857.
   Web of Science ®Google Scholar
• Yousefpour A, Hojjati M, Immarigeon J-P. Fusion bonding/welding of thermoplastic composites. J Thermoplast Composite Mater. 2004;17:303–340.
   Web of Science ®Google Scholar
• Ahmed T, Stavrov D, Bersee H, et al. Induction welding of thermoplastic composites - an overview. Compos Part A. 2006;37(10):1638–1651.
   Web of Science ®Google Scholar
• Bayerl T, Duhovic M, Mitschang P, et al. The heating of polymer composties by electromagnetic induction - a review. Compos Part A. 2014;37(10):27–40.
   Google Scholar
• Choudhury M, Debnath D. A review of the research and advances in electromagnetic joining of fiber-reinforced thermoplastic composites. Polym Eng Sci. 2019;59(10):1965–1985. In press.
   PubMed Web of Science ®Google Scholar
• Kim H, Yarlagadda S, Gillespie J, et al. A study on the induction heating of carbon fiber reinforced thermoplastic composites. Adv Compos Mater. 2002;11(1):71–80.
   Web of Science ®Google Scholar
• Yarlagadda S, Kim H, Gillespie J, et al. A study on the induction heating of conductive fiber reinforced composites. J Compos Mater. 2002;36(4):401–421.
   Web of Science ®Google Scholar
• Rudolf R, Mitschang P, Neitzel M. Induction heating of continuous carbon-fiber-reinforced thermoplastics. Compos Part A. 2000;31(11):1191–1202.
   Web of Science ®Google Scholar
• Xu X, Ji H, Cheng J, et al. Inerlaminar contact resistivity and its influence on eddy currents in carbon fiber reinforced polymer laminates. NDT E Int. 2018;94:79–91.
   Web of Science ®Google Scholar
• Wasselynk G, Trichet D, Ramdane B, et al. Microscopic and macroscopic electromagnetic and thermal modeling of carbon fier reinfoced polymer composites. IEEE Trans Magn. 2011;47(5):1114–1117.
   Web of Science ®Google Scholar
• Van Ingen J, Buitenhuis A, Van Wijngaarden M, et al. Development of the Gulfstream G650 induction welded thermoplastic elevators and rudder. International SAMPE symposium and exhibition; Seattle (WA); 2010.
   Google Scholar
• Taketa I, Kalinka G, Gorbatick L, et al. Influence of cooling rate on the properties of carbon fiber unidirectional composites with polypropylene, polyamide 6, and polyphenylene sulfide matrices. Adv Compos Mater. 2020;29(1):101–113.
   Web of Science ®Google Scholar
• Duhovic M, Moser L, Mitschang P, et al. Simulation of the joining of composite materials by electromagnetic induction. 12th international LS-DYNA user conference; 2012.
   Google Scholar
• Pappada S, Salomi A, Montanaro J, et al. Fabrication of a thermoplastic matrix composite stiffened panel by induction welding. Aerosp Sci Technol. 2015;43:314–320.
   Web of Science ®Google Scholar
• Lionetto F, Pappada S, Buccoliero G, et al. Finite element modeling of continuous induction welding of thermoplastic matrix composites. Mater Des. 2017;120:212–221.
   Web of Science ®Google Scholar
• Duhovic M, Hümbert M, Mitschang P, et al. Further advances in simulating the processing of composite materials by electromagnetic induction. 13th international LS-DYNA user conference; Detroit, MI, United States of America. 2014.
   Google Scholar
• Bensaid S, Trichet D, Fouladgar J. 3-D simulation of induction heating of anisotropic composite materials. IEEE Trans Magn. 2005;41(5):1568–1571.
   Web of Science ®Google Scholar
• Bensaid S, Trichet D, Fouladgar J. Electromagnetic and thermal behaviors of multilayer anisotropic composite materials. IEEE Trans Magn. 2006;42(4):995–998.
   Web of Science ®Google Scholar
• O’Saughnessey P, Dube M, Villegas I. Modeling and experimental investigation of induction welding of thermoplastic composites and comparison with other welding processes. J Compos Mater. 2015;50(1):2895–2910.
   Google Scholar
• Singh Y, “Electrical resistivity measurements: a review. Int J Mod Phy Conf Ser. 2013;22:745–756.
   Google Scholar
• Sheet HPD. HexTow(R) AS4 carbon fiber.Material Data Sheet.
   Google Scholar
• Quiroga Cortès L, Racagel S, Lonjon A, et al. Electrically conductive carbon fiber/PEKK/silver nanowires multifunctional composites. Compos Sci Technol. 2016;137:159–166.
   Web of Science ®Google Scholar
• Yousefpour A, Hojjati M. Welding thermoplastics and thermoplastic composite materials. Chichester (UK): John Wiley & Sons; 2011.
   Google Scholar