Delamination growth in curved composite beam at elevated temperatures

References

• Bucinell RB. Composite materials: fatigue and fracture (7th volume). Philadelphia, PA: American Society for Testing and Materials (ASTM); 1998.
   Google Scholar
• Patel N, Rohatgi V, Lee JL. Micro scale flow behavior and void formation mechanism during impregnation through a unidirectional stitched fiberglass mat. Polym Eng Sci. 1995;35(10):837–851.
   Web of Science ®Google Scholar
• Rohatgi V, Patel N, Lee JL. Experimental investigation of flow induced microvoids during impregnation of unidirectional stitched fiberglass mat. Polym Composites. 1996;17(2):161–170.
   Web of Science ®Google Scholar
• Sridharan S. Delamination behaviour of composites. s: CRC Press LLC, 2008.
   Google Scholar
• Martin RH, Jackson WC Damage prediction in cross-plied curved composite laminates. NASA Technical Memorandum 104089, USAAVSCOM Technical Report 91-B-009; 1991.
   Google Scholar
• Kress G, Roos R, Barbezat M, et al. Model for interlaminar normal stress in singly curved laminates. Compos Struct. 2005;69(4):458–469.
   Web of Science ®Google Scholar
• Wimmer G, Schuecker C, Pettermann HE. Numerical simulation of delamination in laminated composite components – a combination of a strength criterion and fracture mechanics. Compos Part B. 2009;40(2):158–165.
   Web of Science ®Google Scholar
• Nguyen KH, Ju HW, Truong VH, et al. Delamination analysis of multi-angle composite curved beams using an out-of-autoclave materials. Compos Struct. 2018;183:320–330.
   Web of Science ®Google Scholar
• Truong VH, Nguyen KH, Park SS, et al. Failure load analysis of C-shaped composite beams using a cohesive zone model. Compos Struct. 2018;184:581–590.
   Web of Science ®Google Scholar
• Gözlüklü B, Coker D. Modeling of the dynamic delamination ofL-shaped unidirectional laminated composites. Compos Struct. 2012;94(4):1430–1442.
   Web of Science ®Google Scholar
• Hao W, Ge D, Ma Y, et al. Experimental investigation on deformation and strength of carbon/epoxy laminated curved beams. Polym Test. 2012;31(4):520–526.
   Web of Science ®Google Scholar
• Ju HW, Nguyen KH, Chae SS, et al. Delamination strength of composite curved beams reinforced by grooved stainless-steel Z-pins. Compos Struct. 2018;180:497–506.
   Web of Science ®Google Scholar
• Li L, Jia P, Pan W. Temperature effect on the tensile behaviors of carbon/polyimide composite laminate. Proc IMechE, Part C: J Mechanical Engineering Science. 2016;231(24):4592–4602.
   Web of Science ®Google Scholar
• Sun CT, Yoon KJ. Characterization of elastic–plastic behavior of AS-4/PEEK thermoplastic composite for temperature variation. J Composite Mater. 1991;25(10):1297–1313.
   Web of Science ®Google Scholar
• Mahieux C, Russell BE, Reifsnider KL. Stress rupture of unidirectional high performance thermoplastic composites in end-loaded bending at elevated temperatures, Part I: experimental characterization of the failure mode. J Composite Mater. 1998;32(14):1311–1321.
   Web of Science ®Google Scholar
• Miyano Y, McMurray MK, Enyama J, et al. Loading rate and temperature dependence on flexural fatigue behavior of a satin woven CFRP laminate. J Compos Mater. 1994;28(13):1250–1260.
   Web of Science ®Google Scholar
• Lee JJ, Oh IK, Lee I, et al. Thermal post-buckling behavior of patched laminated panels under uniform and non-uniform temperature distributions. Compos Struct. 2002;55(2):137–145.
   Web of Science ®Google Scholar
• Srikanth G, Kumar A. Post buckling response and failure of symmetric laminates under uniform temperature rise. Compos Struct. 2003;59(1):109–118.
   Web of Science ®Google Scholar
• Chen LW, Chen LY. Thermal postbuckling analysis of laminated composite plates by the finite element method. Compos Struct. 1989;12(4):257–270.
   Web of Science ®Google Scholar
• Chen LW, Chen LY. Thermal postbuckling behaviors of laminated composite plates with temperature-dependent properties. Compos Struct. 1991;19(3):267–283.
   Web of Science ®Google Scholar
• Argyris J, Tenek L. Postbuckling of composite laminates under compressive loads and temperature. Comp Meth Appl Mech Eng. 1995;128(1–2):49–80.
   Web of Science ®Google Scholar
• Jen MHR, Tseng YC, Kung H-K, et al. Fatigue response of APC-2 composite laminates at elevated temperatures. Compos Part B. 2008;39(7–8):1142–1146.
   Web of Science ®Google Scholar
• Brillhart M, Botsis J. Fatigue fracture behavior of PEEK: 2. Effects of thickness and temperature. Polymer. 1992;33(24):5225–5232.
   Web of Science ®Google Scholar
• Yoon KJ, Kim JS. Prediction of thermal expansion properties of carbon/epoxy laminates for temperature variation. J Compos Mater. 2000;34(2):90–100.
   Web of Science ®Google Scholar
• Nguyen PN, Kubouchi M, Sakai T, et al. Relationship of mechanical properties and temperature of carbon fiber-reinforced plastics under microwave irradiation. Clean Technol Envir. 2012;14(5):943–951.
   Web of Science ®Google Scholar
• Chen JK, Sun CT, Chang CI. Failure analysis of a graphite/epoxy laminate subjected to combined thermal and mechanical loading. J Compos Mater. 1985;19(5):408–423.
   Web of Science ®Google Scholar
• Zhang Z, Zhou D, Fang H, et al. Analysis of laminated beams with temperature-dependent material properties subjected to thermal and mechanical loads. Compos Struct. 2019;227:111304.
   Web of Science ®Google Scholar
• Wang QZ, Jia XM, Kou SQ, et al. More accurate stress intensity factor derived by finite element analysis for the ISRM suggested rock fracture toughness specimen-CCNBD. Int J Rock Mech Min Sci. 2003;40(2):233–241.
   Web of Science ®Google Scholar
• Sjogren A, Asp LE. Effects of temperature on delamination growth in a carbon/epoxy composite under fatigue loading. Int J Fatigue. 2002;24(2–4):179–184.
   Web of Science ®Google Scholar
• Browning CE, Schwartz HS, Delamination resistant composite concepts, in Composite Materials Testing and Design 7th Conference, ed. Whitney JE, STP 893, ASTM Philadelphia, 1986, 256–265.
   Google Scholar
• Coronado P, Argüelles A, Viña J, et al. Influence of temperature on a carbon-fibre epoxy composite subjected to static and fatigue loading under mode-I delamination. Int J Solids Struct. 2012;49(21):2934–2940. .
   Web of Science ®Google Scholar
• Kim HS, Wang WX, Takao Y. Evaluation by FEM of temperature-dependent damage behavior in quasi-isotropic carbon/epoxy laminates. Adv Compos Mater. 1999;8(3):247–257.
   Web of Science ®Google Scholar
• Street KN, Russell AJ, Bonsang F. Thermal damage effects on delamination toughness of a graphit/epoxy composite. Compos Sci Technol. 1988;32(1):1–14.
   Web of Science ®Google Scholar
• Saeedifar M, Fotouhi M, Ahmadi Najafabadi M, et al. Prediction of delamination growth in laminated composites using acoustic emission and cohesive zone modeling techniques. Compos Struct. 2015;94(5):1483–1494.
   Google Scholar
• Turon A, Davila CG, Camanho PP, et al. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models. Eng Fract Mech. 2007;74(10):1665–1682.
   Web of Science ®Google Scholar
• Choi HS, Kwak BS, Park SM, et al. Tensile strength of composite bonded scarf joint in various thermal environmental conditions. Adv Compos Mater. 2020. DOI:https://doi.org/10.1080/09243046.2019.1710679
   Google Scholar
• Standard test method for measuring the curved beam strength of a fiber-reinforced polymer-matrix composite. ASTM Standard D6415/D6415M.
   Google Scholar
• AGATE WP3.3-033051-134. Advanced general aviation transport experiments. Wichita: National Institute for Aviation Research Wichita State University Wichita; 2002.
   Google Scholar
• Turon A, Camanho PP, Costa J, et al. Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: definition of interlaminar strengths and elastic stiffness. Compos Struct. 2010;92(8):1857–1864.
   Web of Science ®Google Scholar
• Zhao L, Gong Y, Zhang J, et al. Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements. Compos Struct. 2014;116(1):509–522.
   Google Scholar
• Truong VH, Kwak BS, Roy R, et al. Cohesive zone method for failure analysis of scarf patch-repaired composite laminates under bending load. Compos Struct. 2019;222:110895.
   Web of Science ®Google Scholar
• Nguyen N, Waas AM. A novel mixed-mode cohesive formulation for crack growth analysis. Compos Struct. 2015;156:253–262.
   Web of Science ®Google Scholar
• Joseph AP, Davidson P, Waas AM. Open hole and filled hole progressive damage and failure analysis of composite laminates with a countersunk hole. Compos Struct. 2018;203:523–538.
   Web of Science ®Google Scholar
• Benzeggagh ML, Kenane M. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos Sci Technol. 1996;56(4):439–449.
   Web of Science ®Google Scholar
• Kedward KT, Wilson RS, McLean SK. Flexure of simply curved composite shapes. Composites. 1989;20(6):527–536.
   Google Scholar
• https://www.skchemicals.com/page/business/bs_skyflex.do
   Google Scholar
• Geleta TN, Woo K, Lee B. Delamination behavior of L-shaped laminated composites. Int J Aeronaut Space Sci. 2018;19(2):363–374.
   Web of Science ®Google Scholar
• Zou Z, Reid SR, Li S, et al. Modelling interlaminar and intralaminar damage in filament-wound pipes under quasi-static indentation. J Compos Mater. 2002;36(4):477–499.
   Web of Science ®Google Scholar
• Camanho PP, Davila CG, De Moura MF. Numerical simulation of mixed-mode progressive delamination in composite materials. J Compos Mater. 2003;37(16):1415–1438.
   Web of Science ®Google Scholar