Hybrid glass-carbon fiber composites for solar greenhouse dryer trays: a 3D computational analysis

References

• Kumar GNA, Rajesh KN, Rao MVG, et al. A review on mechanical properties of hybrid polymer composites. Mater Today Proc. 2023. doi: 10.1016/j.matpr.2023.05.059
   Google Scholar
• Li C, Xian G, Li H. Effect of postcuring immersed in water under hydraulic pressure on fatigue performance of large-diameter pultruded carbon/glass hybrid rod. Fatigue Fract Eng Mater Struct. 2019;42(5):1148–1160. doi: 10.1111/ffe.12978
   Web of Science ®Google Scholar
• Nadeem M, Chethan S, Srinivasa K, et al. Effect of glass fibers and multi walled carbon nano tubes (Mwcnt’s) on mechanical properties of epoxy hybrid composites at elevated temperature. Mater Today Proc. 2021;44:2013–2018. doi: 10.1016/j.matpr.2020.12.123
   Google Scholar
• Krishna UBG, Srinivasa CS, Amara NS, et al. Processing, characterization and property evaluation of seashell and glass fibre added epoxy based polymer matrix composite. Mater Today Proc. 2021;35:417–422. doi: 10.1016/j.matpr.2020.02.818
   Google Scholar
• Liu B, Wang W, Sutherland LS. Experimental and numerical response and failure of laterally impacted carbon/glass fibre-reinforced hybrid composite laminates. Int J Impact Eng. 2023;179:104654. doi: 10.1016/j.ijimpeng.2023.104654
   Web of Science ®Google Scholar
• Kassa MK, Arumugam AB. Bending response analysis of a laminated, tapered, curved, composite panel made from an agglomerated and wavy MWCNT–glass fiber–polymer hybrid. Trans Canadian Soc Mech Eng. 2022;46(1):103–131. doi: 10.1139/tcsme-2021-0084
   Web of Science ®Google Scholar
• Abolfazli M, Bazli M, Rajabipour A, et al. Residual compressive strength of filament wound hybrid glass/carbon fibre reinforced polymer tubes after exposure to elevated temperature. Compos Struct. 2023;316:117050. doi: 10.1016/j.compstruct.2023.117050
   Web of Science ®Google Scholar
• Abbey L, Rao SA. Differential response of plant species to greenhouse microclimate created by design technology and ambient conditions. Canadian J Plant Sci. 2017. doi: 10.1139/cjps-2016-0419
   Web of Science ®Google Scholar
• Ding S, Zou B, Zhuang Y, et al. Hybrid layout and additive manufacturing of continuous carbon/glass fibers reinforced composites, and its effect on mechanical properties. Comp Struct. 2023;319:117133. doi: 10.1016/j.compstruct.2023.117133
   Google Scholar
• Daliran A, Taki M, Marzban A, et al. Experimental evaluation and modeling the mass and temperature of dried mint in greenhouse solar dryer; application of machine learning method. Case Stud Thermal Eng. 2023;47:103048. doi: 10.1016/j.csite.2023.103048
   Web of Science ®Google Scholar
• Guo R, Xian G, Li C, et al. Effect of fiber hybridization types on the mechanical properties of carbon/glass fiber reinforced polymer composite rod. Mech Adv Mater Struct. 2022;29(27):6288–6300. doi: 10.1080/15376494.2021.1974620
   Web of Science ®Google Scholar
• Srinivasan G, Muthukumar P. A review on solar greenhouse dryer: design, thermal modelling, energy, economic and environmental aspects. Solar Energy. 2021;229:3–21. doi: 10.1016/j.solener.2021.04.058
   Web of Science ®Google Scholar
• Jiang H, Li X, Jiang S, et al. Hybrid effects and interactive failure mechanisms of hybrid fiber composites under flexural loading: carbon/kevlar, carbon/glass, carbon/glass/kevlar. Aerospace Sci Technol. 2023;133:108105. doi: 10.1016/j.ast.2023.108105
   Web of Science ®Google Scholar
• Burley A, Aitharaju V. Enhanced ductility in in-layer glass-carbon fiber/epoxy hybrid composites produced via tailored fiber placement. Compos Part A: Appl Sci Manuf. 2023;168:107488. doi: 10.1016/j.compositesa.2023.107488
   Web of Science ®Google Scholar
• Muthuvairavana G, Natarajana SK. Experimental study on drying kinetics and thermal modeling of drying Kohlrabi under different solar drying methods. Therm SciEng Progress. 2023;44:102074. doi: 10.1016/j.tsep.2023.102074
   Google Scholar
• Grotto F, Rivallant S, Bouvet C. Development of a 3D finite element model at mesoscale for the crushing of unidirectional composites: application to plates crushing. Compos Struct. 2022;287:115346. doi: 10.1016/j.compstruct.2022.115346
   Web of Science ®Google Scholar
• Nedele MR, Wisnom MR. Finite element micromechanical modelling of a unidirectional composite subjected to axial shear loading. Composites. 1994;25(4):263–272. doi: 10.1016/0010-4361(94)90218-6
   Google Scholar
• Prakash C, Selvakumar AA, Sekar K. 3D finite element investigation in high speed drilling of unidirectional glass fiber reinforced polymer composite. Mater Today Proc. 2023. doi: 10.1016/j.matpr.2023.08.234
   Google Scholar
• Bazli M, Benny B, Rajabipour A, et al. Residual compressive strength of seawater sea sand concrete filled hybrid carbon-glass fibre reinforced polymer tubes under seawater: effects of fibre type and orientation. J Building Eng. 2023;70:106383. doi: 10.1016/j.jobe.2023.106383
   Web of Science ®Google Scholar
• Nadondu B, Surin P, Deeying J. Multi-objective optimization on mechanical properties of glass-carbon and durian skin fiber reinforced poly(lactic acid) hybrid composites using the extreme mixture design response surface methodology. Case Studies Construction Mater. 2022;17:e01675. doi: 10.1016/j.cscm.2022.e01675
   Google Scholar