References
- Fernández A, Santangelo-Muro M, Fernández-Blázquez JP, et al. Processing and properties of long recycled-carbon-fibre reinforced polypropylene. Compos B Eng. 2021;211:108653.
- Sharma M, Gao S, Mäder E, et al. Carbon fiber surfaces and composite interphases. Compos Sci Technol. 2014;102:35–50.
- Yao -S-S, Jin F-L, Rhee KY, et al. Recent advances in carbon-fiber-reinforced thermoplastic composites: a review. Compos B Eng. 2018;142:241–250.
- Alshammari BA, Alsuhybani MS, Almushaikeh AM, et al. Comprehensive review of the properties and modifications of carbon fiber-reinforced thermoplastic composites. Polymers. 2021;13(15):2474.
- Park SK, Jung S, Lee DY, et al. Effects of electron-beam irradiation and radiation cross-linker on tensile properties and thermal stability of polypropylene-based carbon fiber reinforced thermoplastic. Polym Degrad Stab. 2020;181:109301.
- Han SH, Oh HJ, Kim SS. Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites. Compos B Eng. 2014;60:98–105.
- Song SA, Lee CK, Bang YH, et al. A novel coating method using zinc oxide nanorods to improve the interfacial shear strength between carbon fiber and a thermoplastic matrix. Compos Sci Technol. 2016;134:106–114.
- Unterweger C, Brüggemann O, Fürst C. Effects of different fibers on the properties of short-fiber-reinforced polypropylene composites. Compos Sci Technol. 2014;103:49–55.
- Fu Y, Li H, Cao W. Enhancing the interfacial properties of high-modulus carbon fiber reinforced polymer matrix composites via electrochemical surface oxidation and grafting. Compos Part A Appl Sci Manuf. 2020;130:105719.
- Karsli NG, Ozkan C, Aytac A, et al. Effects of sizing materials on the properties of carbon fiber-reinforced polyamide 6,6 composites. Polym Compos. 2013;34(10):1583–1590.
- Dilsiz N, Wightman JP. Effect of acid–base properties of unsized and sized carbon fibers on fiber/epoxy matrix adhesion. Colloids Surf A Physicochem Eng Asp. 2000;164(2–3):325–336.
- Xu Z, Huang Y, Min C, et al. Effect of γ-ray radiation on the polyacrylonitrile based carbon fibers. Radiat Phys Chem. 2010;79(8):839–843.
- Tang Y, Liu L, Li W, et al. Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings. Appl Surf Sci. 2009;255(8):4393–4400.
- Pradere C, Batsale JC, Goyhénèche JM, et al. Thermal properties of carbon fibers at very high temperature. Carbon. 2009;47(3):737–743.
- Guo H, Huang Y, Liu L, et al. Effect of epoxy coatings on carbon fibers during manufacture of carbon fiber reinforced resin matrix composites. Mater Des. 2010;31(3):1186–1190.
- Tayfun U, Dogan M, Bayramli E. Effect of surface modification of rice straw on mechanical and flow properties of TPU-based green composites. Polym Compos. 2016;37(5):1596–1602.
- Viju S, Thilagavathi G. Hot water treatment on nettle fibers: an environment-friendly/economical process for the production of oil sorbent. J Nat Fibers. 2020;19(2):761–769.
- Meng L, Fan D, Huang Y, et al. Comparison studies of surface cleaning methods for PAN-based carbon fibers with acetone, supercritical acetone and subcritical alkali aqueous solutions. Appl Surf Sci. 2012;261:415–421.
- Meng L, Fan D, Zhang C, et al. The effect of oxidation treatment with supercritical water/hydrogen peroxide system on intersurface performance for polyacrylonitrile-based carbon fibers. Appl Surf Sci. 2013;273:167–172.
- Khalil A, Xiaohong Q, You P, et al. Effect of de-sizing on the structural and mechanical properties of carbon fiber reinforced polypropylene composites molded by the novel direct fiber feeding injection molding technology. J Thermoplast Compos. Mater. 2022;08927057221077872. doi:10.1177/08927057221077872
- Yan X, Cao S. Structure and interfacial shear strength of polypropylene-glass fiber/carbon fiber hybrid composites fabricated by direct fiber feeding injection molding. Compos Struct. 2018;185:362–372.
- Matsuo T, Nakada M, Kageyama K. Prediction of fiber-directional flexural strength of carbon fiber-reinforced polypropylene based on time–temperature superposition principle. J Compos Mater. 2017;52(6):793–805.
- Zhang Y-Y, Sun Z, Li Y-Q, et al. Tensile creep behavior of short-carbon-fiber reinforced polyetherimide composites. Compos B Eng. 2021;212:108717.
- Grozdanov A, Bogoeva-Gaceva G. Correlations among micro- and macromechanical properties of composite materials based on the interphase concept. Compos Interfaces. 2003;10(2–3):297–317.
- Moosburger-Will J, Bauer M, Laukmanis E, et al. Interaction between carbon fibers and polymer sizing: influence of fiber surface chemistry and sizing reactivity. Appl Surf Sci. 2018;439:305–312.
- Dai Z, Shi F, Zhang B, et al. Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion. Appl Surf Sci. 2011;257(15):6980–6985.
- Abniki M, Moghimi A, Azizinejad F. Fabrication of bionanocomposite based on LDH using biopolymer of gum Arabic and chitosan-coating for sustained drug-release. J Serbian Chem Soc. 2020;85(9):4.
- Qian X, Zhong J, Zhi J, et al. Electrochemical surface modification of polyacrylonitrile-based ultrahigh modulus carbon fibers and its effect on the interfacial properties of UHMCF/EP composites. Compos B Eng. 2019;164:476–484.
- Qian X, Wang X, OuYang Q, et al. Surface structural evolvement in electrochemical oxidation and sizing and its effect on carbon fiber/epoxy composites properties. J Reinf Plast Compos. 2012;31(15):999–1008.
- Song W, Gu A, Liang G, et al. Effect of the surface roughness on interfacial properties of carbon fibers reinforced epoxy resin composites. Appl Surf Sci. 2011;257(9):4069–4074.
- Ashori A, Menbari S, Bahrami R. Mechanical and thermo-mechanical properties of short carbon fiber reinforced polypropylene composites using exfoliated graphene nanoplatelets coating. J Ind Eng Chem. 2016;38:37–42.
- Ozkoc G, Bayram G, Bayramli E. Impact essential work of fracture toughness of ABS/polyamide-6 blends compatibilized with olefin based copolymers. J Mater Sci. 2008;43(8):2642–2652.
- Hendlmeier A, Marinovic LI, Al-Assafi S, et al. Sizing effects on the interfacial shear strength of a carbon fibre reinforced two-component thermoplastic polymer. Compos Part A Appl Sci Manuf. 2019;127:105622.
- Dai Z, Zhang B, Shi F, et al. Chemical interaction between carbon fibers and surface sizing. J Appl Polym Sci. 2011;124(3):2127–2132.
- Sato N, Kurauchi T, Sato S, et al. Microfailure behaviour of randomly dispersed short fibre reinforced thermoplastic composites obtained by direct SEM observation. J Mater Sci. 1991;26(14):3891–3898.
- Rezaei F, Yunus R, Ibrahim NA. Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites. Mater Des. 2009;30(2):260–263.
- Acha BA, Reboredo MM, Marcovich NE. Creep and dynamic mechanical behavior of PP–jute composites: effect of the interfacial adhesion. Compos Part A Appl Sci Manuf. 2007;38(6):1507–1516.
- Wang C, Ying S. Thermal, tensile and dynamic mechanical properties of short carbon fibre reinforced polypropylene composites. Polym Polym Compos. 2013;21:65–72.
- Zhang D, He M, Qin S, et al. Effect of fiber length and dispersion on properties of long glass fiber reinforced thermoplastic composites based on poly(butylene terephthalate. RSC Adv. 2017;7(25):15439–15454.
- Garcia-Martinez JM, Areso S, Collar EP. Preliminary dynamic-mechanical analysis of polypropylene/short carbon fibers composites modified by a succinic anhydride-grafted atactic polypropylene. Polym Eng Sci. 2017;57:731–738.
- Harris B, Braddell OG, Almond DP, et al. Study of carbon fibre surface treatments by dynamic mechanical analysis. J Mater Sci. 1993;28(12):3353–3366.
- Alwis KGNC, Burgoyne CJ. Time-temperature superposition to determine the stress-rupture of aramid fibres. Appl Compos Mater. 2006;13(4):249–264.
- Yu L, Ma Y. Loading rate and temperature dependence of flexural behavior in injection-molded glass fiber reinforced polypropylene composites. Compos B Eng. 2019;161:285–299.