References
- Zexiao X, Jianguo W, Qiumei Z. Complete 3D measurement in reverse engineering using a multi-probe system [J]. Int J Mach Tools Manuf. 2005;45(12-13):1474–1486.
- Li Y, Nomula P R. Surface-opening feature measurement using coordinate-measuring machines [J]. Int J Adv Manuf Technol. 2015;79(9-12):1915–1929.
- Zhang Y C, Han J X, Fu X B, et al. An online measurement method based on line laser scanning for large forgings [J]. Int J Adv Manuf Technol. 2014;70(1-4):439–448.
- Wu F, Mao J, Zhou Y F, et al. Three-line structured light measurement system and its application in ball diameter measurement [J]. Optik Int J Light & Electron Optics. 2018;157:222–229.
- Tong Q B, Jiao C Q, Huang H, et al. An automatic measuring method and system using laser triangulation scanning for the parameters of a screw thread [J]. Meas Sci Technol. 2014;25(3):035202.
- Fei X, Yixin Z, Shun W, et al. Robust extrication method for line structured-light stripe [J]. Optik - Int J Light and Electron Optics. 2013;124(23):6400–6403.
- Xu Z Y, Zheng H Y, Yang H Y. An improved Gaussian fitting method used in light-trap center acquiring [J]. Appl Mech Mater. 2014;596:449–452.
- Mian S H, Mannan M A, Al-Ahmari A M. The influence of surface topology on the quality of the point cloud data acquired with laser line scanning probe [J]. Sens Rev. 2014;34(3):255–265.
- Nurunnabi A, West G, Belton D. Outlier detection and robust normal-curvature estimation in mobile laser scanning 3D point cloud data [J]. Pattern Recognit. 2015;48(4):1404–1419.
- Isheil A, Gonnet J P, Joannic D, et al. Systematic error correction of a 3D laser scanning measurement device [J]. Opt Lasers Eng. 2011;49(1):16–24.
- Wolff K, Kim C, Zimmer H, et al. Point cloud noise and outlier removal for image-based 3D reconstruction [C]. Fourth International Conference on 3d Vision. IEEE, 2016.
- Shen J, Yoon D, Shehu D, et al. Spectral moving removal of non-isolated surface outlier clusters [J]. Comput Aided Des. 2009;41(4):256–267.
- Du J, et al. “Robust laser stripe extraction using ridge segmentation and region ranking for 3D reconstruction of reflective and uneven surface.” 2015 IEEE International Conference on Image Processing (ICIP) IEEE, 2015.
- Amir YM, Thörnberg B. High precision laser scanning of metallic surfaces [J]. Int J Opt. 2017: 1–13.
- Myers ME, Wims A M. Elimination of Speckle noise in laser light scattering photometry [J]. Appl Opt. 1972;11(4):947–965.
- Neil M. Blue laser sensors enable profile measurements on shiny surfaces [J]. Automation. 2015;63:68–123.
- Wang Y, Feng H Y. Modeling outlier formation in scanning reflective surfaces using a laser stripe scanner [J]. Measurement ( Mahwah N J). 2014;57:108–121.
- Wang Y, Feng H Y. Effects of scanning orientation on outlier formation in 3D laser scanning of reflective surfaces [J]. Optics & Lasers in Eng. 2016;81(20):35–45.
- Wang Y, Feng H Y. A rotating scan scheme for automatic outlier removal in laser scanning of reflective surfaces [J]. Int J Adv Manuf Technol. 2015;81(1-4):705–716.
- Bajard A, Aubreton O, Bokhabrine Y. Three-dimensional scanning of specular and diffuse metallic surfaces using an infrared technique [J]. Opt Eng. 2012;51(6):600–612.
- Aubreton O, Bajard A, Verney B. Infrared system for 3D scanning of metallic surfaces [J]. Mach Vis Appl. 2013;24(7):1513–1524.