74
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Effect of tip velocity on weld solidification process of hot-work tool steel

, &
Pages 431-438 | Received 11 Sep 2007, Accepted 06 Nov 2007, Published online: 12 May 2009

References

  • Sato I, Takamatsu E. Metal design and joining technology. Nikkan Kogyo Shinbunsha; 1995.
  • Yoshitani , S . 1997 . Trend in Japan die technology and future challenges for dir steel . Denki Seiko , 68 : 105 – 111 .
  • Namiki , K . 2000 . Trend of new die and mold production technology and tool steels . Denki Seiko , 71 : 157 – 159 .
  • Takagi , R . 1997 . Repir welding for plastic injection mold . Denki Seiko , 68 : 95 – 103 .
  • Capello , E and Previtali , B . 2006 . The influence of operator skills, process parameters and materials on clad shape in repair using laser cladding by wire . J Mater Process Technol , 174 : 223 – 232 .
  • Ando , S and Ohkubo , M . 1983 . Gas shielded arc welding of high carbon steel (report 2) . Quart J Jpn Weld Soc , 1 ( 1 ) : 21 – 29 .
  • Tabe H. An introduction to moulding materials for moulding technicians. Nikkan Kogyo Shinbunsha; 2006.
  • Nihei T. Heat treatment and surface hardening of moulds. Kaibundo Shuppan; 1986.
  • Abe , T . 2006 . Introduction to the computational thermodynamics . Bull Iron Steel Inst Jpn , 11 ( 8 ) : 32 – 39 .
  • Lee M. Basic study of sensitivity of dual-phase stainless steel to solidification cracking and improvements to this [graduation thesis]. Osaka University; 1989.
  • Elmer , JW , Palmer , TA and Babu , SS . 2002 . Synchrotron radiation analysis steel welds . Adv Mater Process , 160 ( 11 ) : 23 – 26 .
  • Elmer , JW , Babu , SS and Specht , ED . 2005 . In situ observations of lattice expansion and transformation rates of A and B phase in Ti-6Al-4V . Mater Sci Eng A , 391 : 104 – 113 .
  • Babu , SS , Elmer , JW , Vitek , JM and David , SA . 2002 . Time-resolved X-ray diffraction investigation of primary weld solidification in Fe–C—Al–Mn steel welds . Acta Materialia , 50 : 4763 – 4781 .
  • Elmer , JW , Wong , J , Froba , M , Waide , PA and Larson , EM . 1996 . Analysis of heat affected zone phase transformations using in situ spatially resolved X-ray diffraction with synchrotron radiation . Metall Mater Trans A , 27A ( 3 ) : 775 – 783 .
  • Elmer , JW , Wong , J and Ressler , T . 2001 . Spatially resolved X-ray diffraction mapping of phase transformations in heat-affected zone of carbon–manganese steel arc welds . Metall Mater Trans A , 32A ( 5 ) : 1175 – 1188 .
  • Elmer , JW , Wong , J and Ressler , T . 2000 . In situ observations of phase transformations during solidification and cooling of austenitic stainless steel welds using time-resolved X-ray diffraction . Scripta Materialia , 43 ( 8 ) : 751 – 757 .
  • Palmer , TA , Elmer , JW and Wong , J . 2002 . In situ observations of ferrite-austenite transformations in duplex stainless weldments using synchrotron radiation . Sci Technol Weld Join , 7 ( 3 ) : 159 – 171 .
  • Babu , SS , Elmer , JW and David , SA . 2002 . In situ observations of non-equilibrium austenite formation during weld solidification of an Fe–C–Al–Mn low-alloy, Quiantana MA . Proc Math Phys Eng Sci , 458 : 811 – 821 .
  • Wong , J , Froba , M , Elmer , JW , Waide , PA and Larson , EM . 2002 . In situ phase mapping and transformation study in fusion welds . Adv Mater Process , 160 ( 11 ) : 23 – 26 .
  • Elmer , JW , Palmer , TA , Babu , SS , Zhang , W and Debroy , T . 2004 . Direct observations of austenaie, bainite and martensite formation during arc welding of 1045 steel using time-resolved X-ray diffraction . Weld J , 83 : 244 – 255 .
  • Komizo , Y , Terasaki , H , Yonemura , M and Osuki , T . 2005 . In situ observation of steel weld solidification and phase evolution using synchrotron radiation . Trans JWRI , 34 ( 2 ) : 51 – 55 .
  • Komizo , Y , Terasaki , H , Yonemura , M and Osuki , T . 2006 . In situ observation of phase evolution in fusion welding of hypereutectoid carbon steel . Quart J Jpn Weld Soc , 24 ( 1 ) : 57 – 64 .
  • Terasaki , H , Komizo , Y , Yonemura , M and Osuki , T . 2006 . Time-resolved in situ analysis of phase evolution for the directional solidification of carbon steel weld metal . Metall Trans A , 37A : 1261 – 1266 .
  • Terasaki , H , Komizo , Y , Yonemura , M and Osuki , T . 2007 . Observation for unidirectional solidification process of low-carbon steel weld metal with synchrotron radiation . Quart J Jpn Weld Soc , 25 ( 1 ) : 80 – 85 .
  • Terasaki , H , Komizo , Y , Nishino , F and Ikeda , M . 2007 . Characterization for Solidification and Phase Transformation of Pure-Titanium Steel Weld Metal with Time Resolved X-Ray Diffraction system . Quart J Jpn Weld Soc , 25 ( 1 ) : 122 – 127 .
  • Yonemura , M , Osuki , T , Terasaki , H , Komizo , Y , Sato , M and Kitano , A . 2006 . In situ Observation for weld solidification in stainless steels using time-resolved X-ray diffraction . Mater Trans , 47 ( 2 ) : 310 – 316 .
  • Osuki , T , Yonemura , M , Ogawa , K , Terasaki , H and Komizo , Y . 2007 . Analysis of solidification process on austenitic stainless steel weld metal using synchrotron radiation. Study of solidification structure on austenitic stainless steel weld metal . Quart J Jpn Weld Soc , 25 ( 1 ) : 215 – 223 .
  • Eikenbery , EF , Bronnimann , Ch , Hulsen , G , Toyokawa , H , Horisberger , R , Schmitt , B , Schulze-Briese , C and Tomozaki , T . 2003 . PILATUS_A two-dimentional X-ray detecter for macromolecular crystallography . Nucl Instr Meth A , 501 ( 1 ) : 260 – 266 .
  • Schmitt , B , Bronnimann , Ch , Eikenbery , EF , Huelsen , G , Toyokawa , H , Horisberger , R , Gozzo , F , Patterson , B , Schulze-Briese , C and Tomozaki , T . 2004 . Development of single photon counting detectors at the Swiss light source . Nucl Instr Meth A , 518 ( 1 ) : 436 – 439 .
  • Bronnimann , Ch , Eikenbery , EF , Henrich , B , Horisberger , R , Huelsen , G , Pohl , E , Schmitt , B , Schulze-Briese , C , Suzuki , M Tomozaki , T . 2006 . The PILATUS 1M detector . J Synchrotron Rad , 13 ( 2 ) : 120 – 130 .
  • Kou , S and Le , Y . 1982 . The effect of quenching on the solidification structure and transformation behavior of stainless steel welds . Metall Trans A , 13A : 1141 – 1152 .
  • Inoue , H , Koseki , T , Okita , S and Tanaka , T . 1995 . Effect of solidification on subsequent ferrite-to-austenite massive transformation in an austenitic stainless steel weld metal . ISIJ Int , 35 : 1248 – 1257 .
  • Gunji , K , Kusaka , K , Ishikawa , E and Sudo , K . 1973 . Solidification structure of high speed tool steel . Tetsu-to-Hagane , 59 ( 8 ) : 1089 – 1103 .
  • Matsuda F. Welding Metallurgy. Nikkan Kogyo Shinbunsha; 1968.
  • Kurz , W , Giovanola , B and Trivedi , R . 1986 . Theory of Microstructural development during rapid solidification . Acta Metallurgica , 34 : 823 – 830 .
  • Rappaz , M , David , SA , Vitek , JM and Boantner , LA . 1990 . Analysis of Solidification Microstructure in Fe–Ni–Cr single-crystal weld . Metall Trans A , 21A : 1767 – 1782 .
  • Gilgien , P , Zryd , A and Kurz , W . 1995 . Metastable phase diagrams and rapid solidification processing . ISIJ Int , 35 : 566 – 573 .
  • Fukumoto , S and Kurz , W . 1997 . The δ to γ transition in Fe–Cr–Ni alloys during laser treatment . ISIJ Int , 37 : 677 – 684 .
  • Fukumoto , S and Kurz , W . 1998 . Prediction of the δ to γ transition in austenitic stainless steel during laser treatment . ISIJ Int , 38 : 71 – 77 .
  • Fukumoto , S and Kurz , W . 1999 . Solidification phase and microstructure selection maps for Fe–Cr–Ni alloys . ISIJ Int , 39 : 1270 – 1279 .
  • Ivantsov , GP . 1947 . Temperatuore Pole Vokrug Sharoobraznogo Tsilindricheskogo I igloobraznog o Kristalla rastushego v pereokhlazhdennom Rasplave . Dokladi Akademii Nauk SSSR , 58 : 857 – 869 .
  • Aziz , MJ . 1982 . Model for solute redistribution during rapid solidification . J Appl Phys , 53 : 1158 – 1168 .
  • Liption , J , Kurz , W and Trivedi , R . 1987 . Rapid dendritic growth into undercooled melts . Acta Metallurgica , 35 : 957 – 964 .
  • Metals Data Book. Maruzen; 2004.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.